Defence Statutory Bodies & Commissions/Committees Closing in 6 days TDR #58445534

Tender For special Repairs For Replacement Of Damaged Internal Wiring & Allied Works At Hussainiwala & Albert Ekka Lines And Certain Minor Works At Namkum Under Ge Ranchi

Issued by Statutory Bodies & Commissions/Committees · Ranchi, Jharkhand
Tender Value
39.17 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
6 days left
EMD
78500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repairs For Replacement Of Damaged Internal Wiring & Allied Works At Hussainiwala & Albert Ekka Lines And Certain Minor Works At Namkum Under Ge Ranchi

BOQ

Name of Work:- SPL REPAIRS FOR REPLACEMENT OF DAMAGED INTERNAL WIRING & ALLIED WORKS AT HUSSAINIWALA & ALBERT EKKA LINES AND CERTAIN MINOR WORKS AT NAMKUM UNDER GE RANCHI
Sl. No. Item Description
1Excavation in trenches in soil n.exc 1.5 m wide and n.exc 1.50m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out complete.
2Removing excavated material exc. 50m but n exc 250m and depositing where directed at a level n.exc. 1.5 m above the starting point.
3Returning filling in incl spreading leveling watering, well ramming in layers not etc 25 cm hard/dense soil
4M&L cement concrete 1:4:8 type D-2 using 40mm graded aggregate in foundation, filling and mass concrete complete.
5M&L broken stone or boulder hardcore of gauge n exc. 63mm, deposited, spread and leveled in layers n exc. 15cm thick, watered and rammed to a true surface.
6M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete
7M&L coloured ceramic glazed tiles 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.
8M&L 40 mm thick damp proof course of cement concrete 1:2:4 type B-0 using 12.50mm graded aggregate horizontal or vertical surfaces including necessary form work complete.
9M&L for Precast RCC slab as in kitchen platform, shelves, cover slab,Lintel cover slab type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified
10M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete.
11Description all as per Ser item No 10 above but 6 to 8 mmmm dia and over in stirrups, spacers and binders complete.
12M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6
13M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in half brick thick built in cement mortar 1:6 complete all as spd and direceted.
14M&L 15mm thick cement plaster on fair faces of bricks work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete.
15M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
16Materials & labour preparation of newly plastered surface and finishing the walls surface with Acrylic Smooth exterior paint of required shade : (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
17Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with 2mm thick wall putty and applying two coat distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than50gms/liters,of approved manufaccturer,of required shadeand colour complete,as per manufacturer specification
18M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.
19M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc complete all as spd & directed.
20M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.
21S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws as specified.
22S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks as specified.
23M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified.
24M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.
25S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
26S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing .
27S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long.
28S & F Aluminium anodised handles of extruded section and fixed 125 mm long.
29S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.
30Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed.
31M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165
32M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete.
33S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples
34M&L Powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, Powder Coated aluminium snap beading, screws etc .including (powder coating not less than 50 micron) complete all as specified.
35S&F 4.00 mm thick Figured glass,pin head type , area exc 0.5 sqm in each pane and fixed to aluminium frame work complete.
36S&F 4.00 mm thick Figured glass,pin head type , area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete.
37Supply & fix PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.
38S&F Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) Including P or S Traps and sheet cover of white colour all as directed and specified.
39Supply & fix vitreous china squatting pan of pattern orrisa size 580mm x 440mm, white with “P” or “S” trap, including integral foot rests any pattern including connections to trap and flush pipe etc including making good to floor to match the existing complete all as specified & directed.
40S&F Health faucet(ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in complete all as specified & directed.
41Supply & fix vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.
42S&F Vitreous China urinal,Half stall type White(excluding waste Pipe) complete all as specified and directed
43S&F PVC connection 450mm long with two PTMT nuts (Prayag)
44S&F bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .
45S&F stop valve 15mm fancy type chromium plated screw down, high pressure with crutch or butterfly handle, screwed both ends for or iron pipe or for unions and fixed complete all as specified and directed
46Supply & fix pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.
47S&F PVC waste pipes of 32mm bore suitable for wash hand basins/sinks complete all as specified & directed.
48S&F looking mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply wood & fixed with brass screw & cup washer all as spd and directed.
49M&L 110mm dia PVC (SWR) P- trap, plain with grating including jointing with solvent cement complete.
50S/F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint laid in trenches complete.
51S/F PVC (SWR) pipes 75mm plain with grating bore single socketed in any length with rubber ring joint laid in trenches complete.
52S/F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete.
53S&F PVC (SWR) vent cowl 110mm bore
54S &F of 20mm Outer Dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in Wall/trenches or laying in floors(including all fittings) complete all as specified.
55Supplying and laying of CPVC pipes 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors(including all necessary fittings) complete all as specified.
56S&F 20/25mm Stop valve of PTMT any colour high pressure screwed for Upvc pipe and fixed comlete all as specified and directed .
57S&F 1000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I
58S&F PVC ball valve 25mm dia high pressure PTMT with epoxy coateed aluminium rod and high density ball (minimum 25mm weight 455 gms) complete all as spd and directed.
59M&L machine cut kota stone slab flooring 18-20mm thick over & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
60Description all as per Ser item No 59 above but as in Skirting with 10mm thick rendering in CM 1:3
61Material & labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified & directed.
62M&L for coloured Vitrified tiles, 10mm thick, edgeless , area of each tile exc 600 x 600 mm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.
63Description all as per Ser item No 62 above but as in Skirting with 10mm thick rendering in CM 1:3
64M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete
65Description all as per Ser item No 64 above but as in Skirting with 10mm thick rendering in CM 1:3
66M&L for 450x350x7mm thick glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.
67M&L for 20 mm thick granite (of any type), as in cooking platform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges complete.
68M&L Precast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in Door/Window lintel, drain cover with & including necessary form work for fair faces of concrete cover set in CM 1:4 complete
69Material & labour for chequered cement concrete tiles 30cmx30cmx20-25mm thick set, jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified & directed.
70M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :- (Note- Modular cover plate and base plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-
71(a) One light point controlled by one, one way switch 5 Amps
72(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator
73(d) One light point controlled by one, two way switch 5 Amps
74(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.
75(f) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.
76(g) One bell point controlled by one, bell switch 5 Amps
77Description all as per item No 70 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
78S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.
79S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.
80S&F switch socket combination 2 in 1, 3 pin, 15 amp multipurpose, flush type, all as specified and as directed
81Supply and fixing ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified.
82M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable, one runs of 4 sqmm cable and one run of PVC conduit will be measured as one unit
83S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
84S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
85S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
86S & F for LED 10 watts batten with decorative end caps complete all as specified and as directed.
87S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed.
88S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, , high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.
89S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired, and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed.
90S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).
91M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
92Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.
93Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.
94Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, onecoat after cleaning all dust etc. (M & L) and Hanging of ceiling fan including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.
95Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.
96S & F for Modular Switch piano flush type, single pole, one way, and 6 Amp single module complete all as specified.
97S & F for Modular Switch piano flush type, single pole, two way, and 6 Amp single module complete all as specified.
98S & F for Modular Switch Socket comb, 6/16A - 2/3 pin combined 3 module complete all as specified.
99S & F for Bell push modular 6 Amps single module complete all as specified.
100S & F for Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified.
101S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.
102S & F for lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.
103S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed
104M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one runs of PVC insulated with 2.5 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 2.5 sqmm cable, one runs of 2.5 sqmm cable and one run of PVC conduit will be measured as one unit
105M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit
106S & F for sheet metal enclosure MCB DB TPN 4 way 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
107S & F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 Amps with extended terminals complete all as specified.
108S & F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 100 Amps with extended terminals complete all as specified.
109S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap complete all as specified and directed.
110S & F for wall mounted LED tube light fitting not less than 10 W, 220V, 6500K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part No Phillips BN021 LED12S 6500K PSU GR / Bajaj-BCLSBAL 12W CW / Havells LUMILINEPLUSPROBS12WLED865SPCSSIND
111S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity not less than 60 watts with pre wired, and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Cat part No Crompton- TRP-421-60-57-SL-LM-NBK / Jaquar- OSL-GRY-LSRT015060XC / Bajaj- VISTA P 78L WH PO PC SD
112M&L for point wiring with 2x 1.5 Sq mm single core PVC insulated unsheathed copper multi stranded conductor (Phase - Red Colour and Neutral Black Colour ) in and including Concealed PVC conduit of size 20 mm for incomer circuit and 25 mm for out goi ng circuit marked inclusive of tees ,bend ,elbows etc upto and including sunk in Anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick sheet cover of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm as earth wire( green colour) to common earth dolly for connection to ceiling rose to earth terminal incl cutting, chasses and making good disturbed surface to match with existing finish with plaster for One light /Fan point controlled by one one way switch complete all as specified and directed at site.
113Description all as per Ser item No 106 above here-in-before but one 3 Pin Socket out let 5 Amps on the same board.
114Description all as per Ser item No 106 above here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common earth dolly.
115S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.
116S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.
117S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
118S&F LED tube light fitting 1x20 watt 230 Volt polycarbonate batten, complete with all accessories internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size
119S&F in replacement of building LED security light fitting 35 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed at site.
120S&F in replacement PVC ventilating air fan single phase 300 mm sweep made up of sturdy steel body, copper winding and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.
121Supply,laying,jointing,testing and commissioning XLPE insulated,armoured,heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 10 sqmm 3 core connected with aluminium lugs connected by cramping tools all as specified and directed at site.Note:- Excavation and earth work will be measured and paid separately.
122Supply and providing sand cushioning with dry clean sand 08 cm below cable and 15 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.
123Supply and laying unreinforced precast cement concrete cable covers, Class LV, Type-1, size 250 mm x 150 mm x 40 mm in trenches for cable protection complete all as specified and as directed by the Engineer - in -Charge.
124Supply and fix of 50 mm bore GI pipe light grade fixed on pole /trenches/wall/road crossing etc complete with clamp nut bolt etc all as specified and directed at site.
125M&L for trenchless boring of dia 80 mm below the GL 500 mm to 1500mm under road crossings/foot paths by manual / Boring machine complete all as specified and directed at site.
126Supply & Fixing G.I tubes med grade 20 mm Bore Galvanized with necessary fittings and clamps as per SSR Part -1 laid in trenches /wall/floors concealed or open execution as directed at site.
127S&F gun metal globe or gate valve 25 mm bore with iron wheel head, screwed both ends with union,long screw with check nut for iron pipe incl taking down existing gate valve complete all as directed at site of following sizes .
128M&L drilling and tapping cast iron water mains in position for branch connections of 20 mm bore internal dia size complete all as directed at site.
129S&F in repair straight plain brass ferrules (or connecting screws) screwed both ends of 20 MM bore size dia complete all as directed at site. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58445534
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 39.17 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repairs For Replacement Of Damaged Internal Wiring & Allied Works At Hussainiwala & Albert Ekka Lines And Certain Minor Works At Namkum Under Ge Ranchi
Basic Detail
Tender No 8400/1314/E8
Bidding Type Tender
Location
City Ranchi
State Jharkhand
Key Dates
Publish Date 07 Nov 2026
Submission Date 28 Nov 2026
Open Date 05 Dec 2026
Finance
Tender Value 39.17 Lakhs
Tender Fee 500
EMD 78500
Exemption Available
Document List
5420277b-0786-45c2-a7d6-e122a38a4288.html
BOQ_895063.xls
Tender1314.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

5420277b-0786-45c2-a7d6-e122a38a4288.html

xls

BOQ_895063.xls

pdf

Tender1314.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender