Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58445533

Tender For Repair/Replacement And Cleaning Of Sewage Line, Drainage System And Allied Works By Mechanical Means At Chandimandir Mil Stn Under Ge Chandimandir

Issued by Statutory Bodies & Commissions/Committees · Panchkula, Haryana
Tender Value
1.48 Crore
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
2.23 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair/Replacement And Cleaning Of Sewage Line, Drainage System And Allied Works By Mechanical Means At Chandimandir Mil Stn Under Ge Chandimandir

BOQ

Name of Work:- REPAIR/REPLACEMENT AND CLEANING OF SEWAGE LINE, DRAINAGE SYSTEM AND ALLIED WORKS BY MECHANICAL MEANS AT CHANDIMANDIR MIL STN UNDER GE CHANDIMANDIR
Sl. No. Item Description
1Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cables, pipes foundation etc or for shafts, wells, cesspits,manholes, pier holes etc, not exc 10 sq metre on plan and n exc1.5 metre in depth and getting out including dressing/trimming sides and levelling/ grading and ramming of bottom of excavation complete, all as specified and directed by Engineer-in-charge.
2Excavation in trenches in soft/loose soil exceeding 1.5 metre and not exceeding 3 metre deep wide for laying of cables, pipes foundation etc or for shafts, wells, cesspits,manholes, pier holes etc, not exc 10 sq metre on plan and n exc1.5 metre in depth and getting out including dressing/trimming sides and levelling/ grading and ramming of bottom of excavation complete, all as specified and directed by Engineer-in-charge.
3Excavation in trenches in soft/loose soil exceeding 3 metre and not exceeding 4.5 metre deep wide for laying of cables, pipes foundation etc or for shafts, wells, cesspits,manholes, pier holes etc, not exc 10 sq metre on plan and n exc1.5 metre in depth and getting out including dressing/trimming sides and levelling/ grading and ramming of bottom of excavation complete, all as specified and directed by Engineer-in-charge.
4Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depth in soils, complete all as specified and directed.
5Removal of excavated material to distance excee 250 m but not exceeding 500 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.
6Material and labour for plain cement concrete type D-2, 1:4:8 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed. thickness as per SSR part 01
7All as per serial item No 6.00 herein before but for 200mm bore of pipe.
8All as per serial item No 6.00 herein before but for 250 mm bore of pipe.
9All as per serial item No 6.00 herein before but for 300 mm bore of pipe.
10Providing at site, lowering, laying, aligning, fixing in position and jointing in trenches at all levels/ depths, M&L Salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked jointed with cement mortar 1:2:4, laid in trenches and tested including demolition and breaking up exisisting drain pipe/ PCC packing in bed and haunching (stone ware/AC/RCC drain pipes etc), complete all as specified and directed. (excavation and earth work shall be measured and paid separately).
11Transporting to site, lowering, laying, aligning, fixing in position and jointing in trenches at all level/ depths, ISI marked Asbestos cement pipes 150mm dia class 1 (Mazza process) pipes for sewer and drainage application as per IS 6908-1991 (amended upto date with AC coupler joints sealed with rubber gaskets (EPDM/SBR) as per IS 5382 complete including cost of all materials except cost of asbestos cement pipes 150mm dia labour jointing water sectional hydro testing (including cost and covenyance of water to site for testing) etc. laid in trenches on concrete bed to level/gradient jointing with appropriate class fittings as per manufacturer's instructions including jointing accessories and fittings complete, all as specified and directed by Engineer-in-charge. Note: Asbestos cement pipe 150mm dia class 1 (Mazza process) shall be issued under Sch `B' free for fixing only.
12Providing at site, lowering, laying, aligning, fixing in position and jointing in trenches at all levels/ depths, ISI marked Asbestos cement pipes 200 mm dia class 1 (Mazza process) pipes for sewer and drainage application as per IS 6908-1991 (amended upto date with AC coupler joints sealed with rubber gaskets (EPDM/SBR) as per IS 5382 complete including cost of all materials, labour jointing, water sectional hydro testing (including cost and covenyance of water to site for testing) etc laid in trennches on concrete bed to level/gradient, jointing with appropriate class fittings as per manufacturer's instructions including jointing accessorties and fittings complete all as specified and directed by Engineer-in-charge.
13Providing at site, lowering, laying, aligning, fixing in position and jointing in trenches at all levels/ depths, ISI marked Asbestos cement pipes 250 mm dia class 1 (Mazza process) pipes for sewer and drainage application as per IS 6908-1991 (amended upto date with AC coupler joints sealed with rubber gaskets (EPDM/SBR) as per IS 5382 complete including cost of all materials, labour jointing, water sectional hydro testing (including cost and covenyance of water to site for testing) etc laid in trennches on concrete bed to level/gradient, jointing with appropriate class fittings as per manufacturer's instructions including jointing accessorties and fittings complete all as specified and directed by Engineer-in-charge.
14Providing at site, lowering, laying, aligning, fixing in position and jointing in trenches at all levels/ depths, ISI marked Asbestos cement pipes 300 mm dia class 1 (Mazza process) pipes for sewer and drainage application as per IS 6908-1991 (amended upto date with AC coupler joints sealed with rubber gaskets (EPDM/SBR) as per IS 5382 complete including cost of all materials, labour jointing, water sectional hydro testing (including cost and covenyance of water to site for testing) etc laid in trennches on concrete bed to level/gradient, jointing with appropriate class fittings as per manufacturer's instructions including jointing accessorties and fittings complete all as specified and directed by Engineer-in-charge.
15PCC 1:4:8 type D2, using 40 mm graded mechnically crushed stone aggregates as in foundation filling and mass concrete complete, all as specified and directed by Engineer-in-charge.
16Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, upto internal dia of pipe 300 mm all as specified and directed.
17Cutting existing roadwork for laying of pipeline and making good including providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern over 150mm thick PCC 1:3:6 type C-2 using 40mm graded aggregates, complete all as specified and directed by Engineer-in-charge.
18Cement concrete 1:2:4 Type B1 as in surface channels and drain all as specified.
19M& L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in flooring /plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.
20S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
21M&L for preparation of new steel surfaces of any description,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.
22Providing and laying 60mm thick factory made chamfered edge concrete paver block of M-35 grade with approved colour, design and pattern as in foot path, parks, lawns, drive ways or light traffic parking etc, of required strength, thikness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, complacting and proper embedding/ laying of Intter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all including demolition of existing PCC surface as specified.
23Cement concrete (1:4: 8) type D-2,using 40 mm graded machanically crushed stone aggregate 75 mm thick as in floors and pavings laid including demolition of existing PCC flooring complete all as specified and directed by Engineer-in-charge.
24M&L for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints or jointed with solvent cement joint, laid in trenches or in floors,type B, conforming to IS 13592-1992 supplied laid, jointed & tested including taking out/down old pipes complete, all as specified and directed by Engineer-in-charge. Note - Rubber rings for pipes and fittings shall conform to IS 5382-1985.
25S & F 110 mm bore PVC (SWR) bends, any radius with or without access door complete all as specified and as directed.
26S & F in repair 110 mm bore PVC (SWR) Junction Single (Single T) equal or unequal complete all as specified and as directed.
27Preparation of new wall surfaces and applying two coats of cement base paint on plastered/unplastered surfaces complete, all as specified and directed by Engineer-in-charge.
28Demolition of brick work masonry, built in cement mortar including dismantling all quions,arches, pillars etc complete all as specified and directed
29Material and labour for brick work, with sub class 'B' bricks straight or curved on plan exc 6 m mean radius for man-holes/ septictank/ soakwell/drain etc. built in cement mortar (1:4) in foul condition complete all as specified and as directed.
30Rendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces mixed with ISI marked water proofing compound, including finishing the surfaces even and smooth without using extra cement, complete, all as specified and directed by Engineer-in-charge.NOTE: Water proofing compound shall be measured and paid separately.
31Supply only integral water proofing compound ISI marked complete, all as specified and directed by Engineer-in-charge.
32Providing cement concrete 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregate as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete, all as specified and directed by Engineer-in-Charge
33Hiring of high-pressure jetting-cum-suction (vacuum/honey sucker) machine mounted on a suitable LCV/HCV or mini-truck, complete with operator and required manpower, for clearing blocked sewer lines, desilting and cleaning of manholes, inspection chambers, septic tanks, soak wells and other similar structures of any size and depth, as directed by the Engineer-in-Charge. The machine shall have a 3,000–5,000 litre mild steel tank with internal and external anti-corrosion/epoxy coating, a vacuum pump with suction lift capacity up to 8 metres and air displacement capacity of 1,000–3,000 m³/hour, reinforced suction hose of 75–100 mm diameter, and a high-pressure triplex plunger jetting pump operating at 100–170 bar. The machine shall be suitable for cleaning sewer lines of 100–450 mm diameter using appropriate shaped, rotating or perforated nozzles. Please Enable Macros to View BoQ information
34Hiring of high-pressure jetting-cum-suction (vacuum/honey sucker) machine mounted on a suitable LCV/HCV or mini-truck, complete with operator and required manpower, for clearing blocked sewer lines, desilting and cleaning of manholes, inspection chambers, septic tanks, soak wells and other similar structures of any size and depth, as directed by the Engineer-in-Charge. The machine shall have a 3,000–5,000 litre mild steel tank with internal and external anti-corrosion/epoxy coating, a vacuum pump with suction lift capacity up to 8 metres and air displacement capacity of 1,000–3,000 m³/hour, reinforced suction hose of 75–100 mm diameter, and a high-pressure triplex plunger jetting pump operating at 100–170 bar. The machine shall be suitable for cleaning sewer lines of 100–450 mm diameter using appropriate shaped, rotating or perforated nozzles. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58445533
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.48 Crore
LAST DATE 05-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Replacement And Cleaning Of Sewage Line, Drainage System And Allied Works By Mechanical Means At Chandimandir Mil Stn Under Ge Chandimandir
Basic Detail
Tender No CWE/CHM-91/2026-27
Bidding Type Tender
Location
City Panchkula
State Haryana
Key Dates
Publish Date 07 Nov 2026
Submission Date 05 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value 1.48 Crore
Tender Fee 1000
EMD 2.23 Lakhs
Exemption Not Available
Document List
2d6f4eb0-db7c-4309-8781-23c3508d04d3.html
BOQ_894995.xls
Tenderdocuments91.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

2d6f4eb0-db7c-4309-8781-23c3508d04d3.html

xls

BOQ_894995.xls

pdf

Tenderdocuments91.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender