Tender For Provision Of High Mast Lights At Certain Locations At Afs Sulur.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Nov 2026
14 days left
EMD
89573
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of High Mast Lights At Certain Locations At Afs Sulur.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) SULUR NAME OF WORK : PROVISION OF HIGH MAST LIGHTS AT CERTAIN LOCATIONS AT AFS SULUR. CA NO: GE(AF)/SUL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Supply,fixing,Testing and Commissioning of High Mast steel tubular structure 15 metre long having material of construction as per BSEN 10025 for shaft and gussets and grade Fe-410 WA as per IS-2062 for 8 Nos of LED Flood lights lantern symmetrically fitted along with their control gear and having three point suspension system with stainless steel wire rope AISI 316 Grade of 6mm dia 97/19 guage and double drum winch with luminaire mounting arms, pulley assembly LED Single dome aviation obstruction light with LED lamp, lightening arrester spike flange and door stiffness construction in two section longitudinal and welded in one section with thickness of sheet 3 mm top and 4 mm bottom.Lighting finial including necessary PCC/RCC foundation of high mast light as per manufacturer design as specified and comprising the following dimensions with the following accessories.Note:- 1. Make of High Mast and LED Flood lights shall be same. Detailed Other Technical Specs of the High Mast Tower are as mentioned below:-(a) Length of bottom section – 8.250 Mtrs (b) Length of top section – 8.250 Mtrs (c) Base dia 360 mm (approx) (d) Top dia – 150mm (approx) (e) Size of opening and door at base – 1200 x 250 (close fitting door with suitable reinforcement to avoid buckling at base of mast) (f) Lighting protection finial-G. Single spike of length 1200mm (g) Foundation depth length – 850 mm (h) Nos of foundation bolts – 06 Nos (j) PCD of foundation bolts – 445 mm (k) Diameter of foundation bolts – M 24.(b) Size of base plate 25 mm thick and 540 mm dia , each set – 01 Nos.(c) Lantern carriage:- Lantern carriage Square Pipes with class Black MS pipe having 600 mm (ID) Dia suitable to mount 08 Nos of lantern fitting symmetrically ( No. of pipes must be in accordance for mounting 08 Nos of Lighting fixtures). |
| 3 | (d) Winch:- Winch double drum type having operating speed 180RPM and gear ratio 50:1 working operating manually/electrically with stainless steel wire rope 6mm dia top point suspension system including thimble copper, capacity SWL 500 Kgs. lubrication arrangement self lubricant in permanent oil both bath type SAE-90/140 or equivalent Each Job – 01 Nos.(e) Stainless steel wire rope:- Diameter of SS rope 6mm. AISI 316 grade, construction of SS rope 7/19. Stainless steel of centre core material DIN 3060. 3 Nos rope of 6mm for Lantern carriage. 2 Nos of 6mm for double drum winch. Breaking load capacity of SS wire rope are 2350 Kgs per SS rope.(f) Trailing cable:- Copper conductor cable PVC sheathed Flexible type 1100 volt grade of size 2.5 Sq mm PVC X 5 Cores, I.S Approved Make.(g) Power Tool:- 1.50 HP / as recommended by OEM integral model, single speed, reversible 415 volts with mechanical tripping facility. |
| 4 | S&F LED Flood Light fitting 210 Watt elegantly designed, pressure die cast Aluminium housing in powder coated finish IP-66, Lumen Effiicency >= 120 lm/W and total lumens output must be greater than or equal to = 25,200 Lumens, operating voltage range 120 – 270, P.F > 0.95,CCT – 5700K, Surge protector of 10 KV inside fitting, driver of the fitting shall be potted type only for vibration proof performance with over voltage protection & other features like – APFC for Power Factor correction, inbuilt Surge Arrestor (In Driver) 4 KV, over voltage protection ≥300 VAC, 440V withstand for continuous 8 hrs. Both fixture and driver must have seperate BIS marked registration with clearly mentioned on fixture & as well as on driver including making connection with 3 Core x 2.50 Sqmm FRLSH wire all as specified and directed. |
| 5 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sq mm 4 core complete all as specified and directed. |
| 6 | Excavation in trenches in soft/loose of soil not exceeding 1.5 m deep and not exceeding 1.5 m width and getting out including forming bottom surface to required slope/gradient for laying cables/pipes/pole foundation etc complete all as specified and directed. |
| 7 | All as per item No. 5.00 here-in-before but depth exc 1.5 m but not exc 3 m complete all as specified and directed. |
| 8 | Laying Riddled earth cushioning for cable protection in trenches 8cm before laying of cable and 15cm thick over the cable complete all as specified and directed.Note :- Punned down thickness 18cm shall be measured and paid. |
| 9 | Supply & laying fly ash bricks of old size 230 x113 x 75mm laid across length of trench for protection of cable of any size complete all as specified and directed |
| 10 | Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick after the cables etc. are laid, jointed and tested complete all as specified and directed. |
| 11 | Removal of surplus excavated soil not exceeding 50 m distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 12 | Supply, installation, commissioning and testing of High Mast Timer Panel (CPRI Approved) out door type 415 Volts, 50 Hz, 3 Phase 4 wire supply pedestal mounted door opening with locking arrangement factory assembled, weather and vermin proof (protection class IP-54) canopy on top, outer door made out of 2.5 to 3.15 mm thick CRCA sheet for individual hinged type door for MCBs, powder coated and supported on 40 mm x 40 mm x 5 mm M.S angle iron frame complete including necessary foundation for mounting of Panel Board to accommodate and including the following items:-(a) TPN MCB 63 Amp-01 No (b) TP Contactor 25 Amp-01 No (C) TP Contactor 9 Amp-02 Nos (d) Digital Timer Switch type - 01 Nos(e) SP MCB 6 Amp-01 No(f) Push Button-02 Nos (g) Toggle Switch-01 No(h) Glass Fuse-01 No (i) 20 Amp SP MCB “C” Curve Total = 3 Nos. for Making Circuit of 3 Lights on Each MCB(j) Neutral Link-01 No (k) Terminals:- (i) Incoming suitable 35 Sqmm - 01 No (ii) Outgoing 16 Sqmm (Close Type) - 04 Nos (iii) Outgoing 16 Sqmm (Close Type) - 03 Nos |
| 13 | M&L for earthing complete with galvanised steel plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 3.75 Mts deep below ground level with top edge of the plate not less than 2.25 Mtrs below ground level connected to glavanised iron strip 32 x 6 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of copper strip incl laying of charcoal dust and common salt PCC (1:2:3) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick cement mortar 1:6 internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test incl testing complete all as specified an directed.Notes: (i) The unit rate includes 40 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate includes GI main earthing lead/strip of size 32x6 mm from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the Govt till desired result is obtained (iv) After completion of work earthing shall be tested by the contractor in presence of Engineer-in-Charge / JE E/M and proper record shall be maintained duly signed by all concerned. (v) Earth resistance tester shall be provided by the contractor. |
| 14 | Supply, Install and commissioning 100A Aluminium Busbar chamber outdoor type IP-65 of size 0.6 x 0.6 x 0.45 m made out of 3.15 mm thick MS sheet and angle Iron frame work and canopy including PCC foundation for chamber to fix at min 1.5 feet above from ground level confirms to IEC61439-2 complete all as specified an directed. |
| 15 | M&L Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 100 mm dia suitable for 0.4 mpa working pressure complete all as specified an directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender