Defence Statutory Bodies & Commissions/Committees Closing in 11 days TDR #58445530

Tender For Special Repairs To Family Welfare Centre (Building No P-262) At installation Rajali, Arakkonam.

Issued by Statutory Bodies & Commissions/Committees · Ranipet, Tamil Nadu
Tender Value
29.04 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
11 days left
EMD
58080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ranipet → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Family Welfare Centre (Building No P-262) At installation Rajali, Arakkonam.

BOQ

Name of Work:- SPECIAL REPAIRS TO FAMILY WELFARE CENTRE (BUILDING NO P-262) AT INS RAJALI, ARAKKONAM.
Sl. No. Item Description
1Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish removed outside the defence land complete all as specified and directed.
2M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6 complete all as specified and directed.
3M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skiritng etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including with 10 mm thick baking course in CM 1:4 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
4M&L for Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed.
5M&L for Glazed ceramic colour tiles of size 450 x 300 x 7mm thick (premium/special quality) in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and directed.
6Demolition of cement concrete of any description and in any position complete all as specified and directed.
7M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in levelling coarse of tile flooring etc complete all as specified and as directed.
8M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:-(i) Taking out old roof treatment and delomition of old concrete tiles and roughening the same old concrete slab by picking, sweeping clean and washing down with water to remove dust etc.and applying cement slurry @3kg/Sqm(ii) Screed bed or bedding layer of mortar 1:4 in 15 mm thick for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement. (Note: WPC shall be measured and paid for under separate items)(iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986.(iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be less applied over bituminous primer as specified above over a Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.(v) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm.
9Demolition of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed.
10M & for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
11M&L for cutting three anti- skid grooves on marble/granite steps (3-5 mm width and 3-5 mm depth) with using diamond cutter complete all as specified and directed.
12M&L for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed.
13Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames) complete all as specified and directed.
14Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frames) complete all as specified and directed.
15Taking down shutter of any description exc 1 Sqm but not exc 2.00 sqm each complete all as specified and directed.
16S&F 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
17S&F 35 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed.
18S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and directed.
19M&L for preparation of new wooden surface over 10cm width and applying two coats of synthetic enamel (ordinary tint) over a coat of pink primer complete all as specified and directed.
20Supply & fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm, wood grain printed PVC sheet used instead of Plain colour PVC sheet & edge reinforced with M.S. Square tube will be painted to match with printed sheet complete all as specified and as directed.
21Supply & Fix Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face as per specification complete all as specified and as directed.
22S&F powder coated anodised aluminium alloy sections ventilator series B weight of section frame not less than 0.8kg/m duly fitted with neoprene beading, louvers glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness, aluminium wire cloth 0.45 mm dia and average width of aperture 1.4 mm, aluminium alloy handles etc including taking down old window in any size and make and make good jambs and cills complete all as specified and directed.Note : Rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, louvers glazing clips, aluminium snap beading, locking arrangements, etc.
23Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, (area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed. Note:(i) Glass shall be measured and paid separately.(ii) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
24S&F Sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames or UPVC frames complete all as specified and as directed.
25S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
26M&L for 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
27M&L for 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
28M&L for 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
29M&L for 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
30S&F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
31S&F in repairs 25 mm dia curtain rods, anodised aluminium alloy with fixing including brackets, stops rollers etc., complete all as specified and as directed.
32Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
33M&L for 15 mm thick rendering into two layers consisting 10 mm thick in CM 1:6 followed by 5 mm thick in CM 1:4 with WPC on fair faces of brick work or concrete surface including finished even and fair complete all as specified and directed.Note : WPC shall be measured and paid separately.
34M&L for 10 mm thick rendering on internal wall surfaces in cement plaster 1:6 on fair faces incl finished even and smooth w/o using extra cement complete all as specified and directed.
35Supply only Integral waterproofing compound complete all as specified and directed.
36M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces with cement plaster 1:3, finished even and smooth (without using extra lime or cement) on ceiling complete all as specified and directed.
37M&L for two coat of distemper oil emulsion paint over a coat of primer and 3mm of putty on wall including preparation of new surface by using mechanicall tool/ auto roller complete all as specified and directed. Note:(a) All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved from GE before carrying out the work.
38M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and 3 mm wall care putty by using mechanical tool/auto roller complete all as specified and directed.Note:(a) All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved from GE before carrying out the work.
39M&L for preparing plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.
40Complete Removal of existing treatment on wall by vacumbased sanding machine removal of nails etc & fillng cracks and applying Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and 3 mm of wall care putty by using mechanical tool/auto roller complete all as specified and directed. Note:(a) Chajja, beam, column to be painted different colour as per Engineer-In-Charge instructions.(b) All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved from GE before carrying out the work.
41Complete Removal of existing treatment on ceiling and applying two coats of white wash by using mechanicall tool/ auto roller complete all as specified and directed.
42Complete Removal of existing treatment on wall by vacuumbased sanding machine removal of nails etc & filling cracks and applying two coats of oil bond distemper over one coat of alkali resistant primer and 3mm of wall care putty by using mechanicall tool/ auto roller complete all as specified and directed. Note:(a) All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved from GE before carrying out the work.
43M&L for preparation of old decorated plastered surfaces of walls including cornices, plasters etc and applying two coat of white wash complete all as specified and directed.
44M&L for surfaces of any description, not otherwise described, over 10cm width, preparation of old wooden surface and one coat of synthetic enamel (ordinary tint) complete all as specified and directed.
45M&L for preparation of old steel surface and applying of one coat of synthetic enamel paint exc 10cm width or girth complete all as specified and directed.
46Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
47Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
48S&F 25mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed.
49S&F 20mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., with all fittings complete all as specified and as directed.
50Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
51S&F 110mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
52S&F 75mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
53S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
54S&F in repairs PVC (SWR) bend with access door of 110mm bore complete all as specified and directed.
55S&F in repairs PVC (SWR) bend with access door of 75mm bore complete all as specified and directed.
56S&F in repair PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal complete all as specified and as directed.
57S & F in repairs 1000 litres capacity double layer, rotational molded, polythene (white colour), tripple layer water storage tank, ISI Marked (Cylindrical vertical with closed top), colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified and as directed.
58S & F in repair Vitreous china squatting pan of pattern Orissa Pattern of size 580x 440 mm white with 110mm bore PVC ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( 1:5:10, using 40 mm graded stone aggregates) and finishing the top surfaces to match with the existing flooring complete all as specified and directed.
59S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
60S&F in repairs 10 ltrs, PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and including PVC 32 mm dia, for low cistern complete all as specified and as directed.
61S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including bracket and cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste complete all as specified and as directed.
62S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.
63S&F in repair 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed.
64S&F in repairs 15mm bore Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
65S&F in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
66S&F in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, but fancy type, chromium plated complete all as specified and as directed.
67S & F in repair 15 mm bore CP fancy type 2 in 1 bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
68S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
69S&F in repair brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia complete all as specified and directed.
70S & F in repairs PVC connection 15 mm size PTMT nuts length 450mm complete all as specified and as directed.
71S & F in repairs 32mm dia bore PVC waste pipe for wash basin complete all as specified and as directed.
72S&F in repair of mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
73Demolition of cement concrete un- reinforced in ground floor & and paving not exceeding 15cm thick complete all as specified and directed.
74M&L for PCC 1:3:6 type C2 75 mm thick (using 20 mm graded aggregate) , as in plinth protection and paving tiles finished the surfaces even and fair with out using extra cement complete all as specified and directed.
75M&L for PCC 1:3:6, type C2, using 40 mm graded stone aggregate as in surface channels and drain complete all as specified and directed.
76M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitered/stopped ends etc. complete all as specified and directed.
77M&L for 75 mm thick cement concrete 1:4:8, Type D2, using 40mm graded stone aggregate, in sub-base concrete to pavement complete all as specified and directed.
78M&L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
79M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
80M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.
81Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlars facings dressed stone work and pre cast concrete articles complete all as specified and directed.
82Material and Labour for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed.
83Material and Labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
84M&L for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed
85M&L for Parking tiles of size 40 cm x40 cm x10 mm thck with grey cement and pigment (of approved tint) over and including 15 mm thick screed bed in cement Mortar 1:6, set, jointed and pointed in neat cement slurry complete all as specified and directed.
86Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. complete all as specified and as directed.
87Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into existing concealed conduit through Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to modular switches and sockets with iron screws for mountling switches, socket, fan regulators etc complete for for the following point wiring complete all as specified and as directed.
88One light/fan point controlled by one switch with cable 1.5 Sqmm size.
89All as per item ser No-87 above here in before but one 3 pin socket outlet 6 Amps, same board with cables 1.5 Sqmm size.
90All as per item ser No-87 above here in before but one 3 pin socket outlet 6 Amps, independent board with cables 2.5 Sqmm size.
91All as per item ser No-87 above here in before but one 5 pin socket outlet 6/16 Amps, indipendent board with cables 4 Sqmm size.
92Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC conduit of minimum 20 mm dia concealed/surface wiring through Wall/Ceiling/Flore etc including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc all as specified and directed complete for the following:-
93One light/fan point controlled by one switch.
94All as per item ser No-88 above here in before but one 3 pin socket outlet 6 Amps, Independent board with cables 1.5 Sqmm size.
95All as per item ser No-88 above here in before but one 3 pin socket outlet 16 Amps, independent board with cables 4.0 Sqmm size.
96Supply and fixing Modular switch one way 5/6 A white Active one module complete all as specified and as directed.
97Supply and fixing Modular socket 5 Amp, 2/3 pin Active white two module complete all as specified and as directed.
98Supply and fixing Modular switch one way 16 A white Active one module all as specified and as directed.
99Supply and fixing Modular socket 16 A, 5 pin multi purpose Active white two module complete all as specified and as directed.
100S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated body including taking down complete all as specified and as directed.
101Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. complete all as specified and as directed.
102Supply and fixing of GI metal flush box suitable for mounting moduler plate including removing old rusted metal box from site as per requirement of following modules:-
103GI metal flush box, 2 Module
104GI metal flush box, 3 Module
105GI metal flush box, 6 Module
106GI metal flush box, 8 Module
107GI metal flush box, 12 Module
108Supply and fixing of combined both frame and cover plates fixing on mounting boxes for following modules:-
109Cover plate with frame, 2 Module
110Cover plate with frame, 3 Module
111Cover plate with frame, 6 Module
112Cover plate with frame, 8 Module
113Cover plate with frame, 12 Module
114M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes complete all as specified directed.
115Supply and fix in repair of high efficiency wall mounted LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.
116Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.
117Taking down Ceiling fan/ Exhaust fans/ wall mounted fan of any make and sweep from ceiling hook/existing position complete including disconnecting and refixing it existing position complete all as specified and as directed.
118Supply and replacement of Metal clad socket single pole and neutral enclosure with a two pin + earth plug top and socket including taking down complete with one doble pole 20-32 Amps MCB C Type 230 Volts complete all as specified and directed.
119Taking down sub main wiring along with earth wire of any sizes complete all as specified and directed.
120Material and labour for Sub main wiring with Two run single core 2.5 sqmm for phase and neutral and one run single core 2.5 sqmm ass earth wire with multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into concealed conduit or non-metallic rigid PVC conduit of minimum 40 mm dia as per site requirement wiring through wall/cable tray/ceiling/floor/roof etc including conduit accessories complete all as specified and as directed. Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale. (i) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles .(iv) Three run of 2.5 Sqmm cable, and one run of PVC conduit will be measured as one unit length.
121All as per item ser No-103 above here in before but Two run single core 4 sqmm for phase and neutral and one run single core 4 sqmm as earth wire (ie 3X4 Sq mm) Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale. (i) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles .(iv) Three run of 4.0 Sqmm cable, and one run of PVC conduit will be measured as one unit length.
122All as per item ser No-103 above here in before but Four run single core 6 sqmm for phase and neutral and two run single core 6 sqmm as earth wire (ie 6X6 Sq mm) Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale. (i) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles .(iv) Six run of 6.0 Sqmm cable, and one run of PVC conduit will be measured as one unit length.
123All as per item ser No-103 above here in before but two run single core 10 sqmm for phase and neutral and one run single core 10 sqmm as earth wire (ie 3X10 Sq mm) Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale. (i) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles .(iv) Three run of 10.0 Sqmm cable, and one run of PVC conduit will be measured as one unit length.
124Supply and fix MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve including taking down old unserviceable complete all as specified and as directed.
125Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve including taking down old unserviceable complete all as specified and as directed.
126Supply and fix for MCB TP 415 V, 40-63 Amps with breaking capacity 10KA C curve including taking down old unserviceable complete all as specified and as directed.
127Supply and fix for MCB TPN 415 V, 40-100 Amps with breaking capacity 10KA C curve including taking down old unserviceable complete all as specified and as directed.
128S&F DB for MCB SPN 12 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type having IP 43 and IK 09 protection including taking down old u/s DB complete all as specified and directed . Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.
129S&F sheet metal enclosure TPN MCB DB 04 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements including taking down old u/s DB complete all as specified and directed . Note :- MCBs shall be measured and paid separately under the respective item of shedule.
130S&F sheet metal enclosure VTPN 04 way MCCB DB double door with spreader terminals,insulating phase barrier and hardware, having IP 43 and IK 09 protection with neccesary arrangements including taking down old u/s DB complete all as specified and directed (For lift)
131Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Fixed Magnetic setting type type 125 Amps with breaking capacity 16 KA including taking down old unserviceable complete all as specified and as directed.
132Supply and fixing in repair of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC cool white (or) warm white colour, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
133Taking down the old serviceable LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC & LED Round light 15W and kept it in store for safe custody and refix it in original position including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting complete all as specified and as directed Please Enable Macros to View BoQ information
134Taking down the old serviceable LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC & LED Round light 15W and kept it in store for safe custody and refix it in original position including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting complete all as specified and as directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58445530
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 29.04 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repairs To Family Welfare Centre (Building No P-262) At installation Rajali, Arakkonam.
Basic Detail
Tender No 8666E8
Bidding Type Tender
Location
City Ranipet
State Tamil Nadu
Key Dates
Publish Date 07 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 29.04 Lakhs
Tender Fee 500
EMD 58080
Exemption Available
Document List
81c7667f-76ca-4941-a5ca-ee1f9553236b.html
8666TENDER.pdf
BOQ_895070.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

81c7667f-76ca-4941-a5ca-ee1f9553236b.html

pdf

8666TENDER.pdf

xls

BOQ_895070.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender