Defence Statutory Bodies & Commissions/Committees Closing in 8 days TDR #58445516

Tender For special Repair Of Single Offrs Accn Qtr No 277/1 & 277/2 (Ff) Of Mh Golconda At New Md Lines And Provn Of Geyser For Jcos/Or Md Accn At Arty Centre Hyderabad Under Ge Golconda

Issued by Statutory Bodies & Commissions/Committees · Hyderabad, Telangana
Tender Value
41.53 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair Of Single Offrs Accn Qtr No 277/1 & 277/2 (Ff) Of Mh Golconda At New Md Lines And Provn Of Geyser For Jcos/Or Md Accn At Arty Centre Hyderabad Under Ge Golconda

BOQ

Name of Work:- SPL REPAIR OF SINGLE OFFRS ACCN QTR NO 277/1 & 277/2 (FF) OF MH GOLCONDA AT NEW MD LINES AND PROVN OF GEYSER FOR JCOS/OR MD ACCN AT ARTY CENTRE HYDERABAD UNDER GE GOLCONDA
Sl. No. Item Description
1BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8170/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: SPL REPAIR OF SINGLE OFFRS ACCN QTR NO 277/1 & 277/2 (FF) OF MH GOLCONDA AT NEW MD LINES AND PROVN OF GEYSER FOR JCOS/OR MD ACCN AT ARTY CENTRE HYDERABAD UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES
2Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as specified and directed.
3S&F Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410 -W (GdeE- 250) qualityA complete all as specified and as directed.
4S&F MS work as in fencing post and struts including cutting tops to shape as directed , drilling holes, notching for wire etc., flat iron fillets,nuts & bolts etc for securing wire mesh including all necessary drilling, bolting or riveting etc., similar works con forming to Fe-410 or Fe-310 grade, complete all as specified and directed.
5S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.
6M&L for applying two coats of synthetic enamel paint over a coat of red oxide new or untreated steel surfaces exc 10 cm in width or girth including preparation complete all as specified and directed.
7M & L for Cutting out V - grooves in plaster / masonry and inserting the waterproofing membrane and making good in CM 1:3 complete all as specified and directed.
8M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding finished even and smooth using extra cement with WPC complete all as specified and directed. (NOTE : Supply of WPC will be paid under the respective Item)
9M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bituminous primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and providing necessary slope with using WPC @ 3% by weight of cement complete including taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbing down with water to receive new treatment complete all as specified and directed.
10Taking up or down for bore of pipes in 15 mm, steel tubing and connections, including cleaning for refixing or removal to store etc completed all as specified and directed.
11M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specified and directed.
12Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
13Taking up or down for bore of pipes in 20 mm, steel tubing and connections, including cleaning for refixing or removal to store etc completed all as specified and directed.
14Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
15Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete (reinforced), etc complete all as specified and directed.
16M&L for Reinforced cement concteteType B1, 1:2:4 (20 mm graded stone aggregate) in slabs supported on walls, beams, landings, balconies, canopies, deck slabs and, shelves and similar works etc complete all as specified and directed.
17M&L for Reinforced cement concteteType B1, 1:2:4 (20 mm graded stone aggregate) in chajjas complete all as specified and directed.
18M&L for Formwork to soffits of suspended slabs of thickness not exceeding 200mm such as roof slabs, floor slabs, landings and similar work as flat finishing to fair finished surface of concrete complete all as specified and directed.
19M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
20Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground floor) complete all as directed.
21M&L for 75mm thick plain cement concrete 1 : 3 : 6 mix type C2 (using 40mm graded stone aggregate) finished even and smooth with out using extra cement including necessary form work complete all as specified and directed.
22Dismantling floor, hearth or wall tiling including cement mortar bedding, backing and rubbish off the premises complete all as specified and directed.
23M&L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm, but n exc. 0.11 sqm, in floor etc. set and jointed in net cement slurry & pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed.
24M&L for Vitrified light shade ceramic tiles 10 mm thick (square/ rectangular ) polished, area of each tile not exceeding 0.36 sqm , in floor/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, laid over and including 15mm thick screed bed or bedding in cement mortar (1:3),complete all as specified and directed.
25M&L for glazed ceramic coloured tiles in vertical surface 450 x 300 x 7mm thick set and jointed in cement slurry and pointed with white or coloured cement to match incl. Rendering 10mm thick backing coat in CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.
26Dismantling of stone slab and tiles of any description or thickness in floors, aprons laid , bedded and pointed any mortar complete all as specified and directed.
27M & L for Granite (with minimal / no flecks) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms, over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all specified and directed.
28M&L for chequered cement concrete, coloured tiles, textured finished of size 250 x 250 x 22 mm/300 x 300 x 22 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
29M & L for 20-25 mm thick, Machine cut kota stone slab flooring over 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and as directed.
30M & L for 20-25 mm thick Kota stone slab over 15 mm thick rendering in cement mortar 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and as directed.
31Demolition of brick work or stone/boulder masonry, built in cement mortar complete all as specified and as directed.
32M&L for Brickwork with flyash bricks, old size one brick straight or curved on plan exc 6m mean radius, built in CM 1: 6complete all as specified and as directed.
33M&L for cleaning/removing all vegetation, bushes/small trees on vertical side of wall/chajjas/slab of building and making good the surfaces with PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) or rendering in CM (1:3) including removing spoils obtained to a distance not exc 50 metre and depositing complete all as specified and directed.
34Demolition of cement concrete (unreinforced) on sunken floor, roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
35M&L for sunken floor filling with cement concrete Type E2 1:5:10 (Using 40 mm graded stone aggregate) complete all as specified and directed.
36M&L in sunken floor with 15mm thick rendering in cement mortar 1:3 with WPC as per manufacturers instructions on fair faces of brick or concrete surface, etc completed all as specified. (WPC will be paid separately)
37M&L for sunken floor with APP modified pre-fabricated five layer water proofing membrane 3 mm thick not less than 3.60 kg/sqm applied and laid over primed surface including bituminous primer conforming to IS -3384 as per manufacturer instruction complete all as specified and directed.
38M & L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) set in CM 1:4 as in benching to manholes / gully traps etc complete all as specified and directed.
39Taking down cement or cement lime plaster on brick or stone walls/ceiling including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
40M&L for Rendering, 10mm thick, in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.
41M&L for rendering 15mm thick in CM 1:4 with WPC on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement complete all as specified and directed. (NOTE : - WPC will be measured and paid separately)
42Supply only liquid water proofing compound of approved make complete all as specified and directed.
43M&L for 5 mm thick plastering in CM 1:3 finished even and smooth with out using extra cement on concrete surface of ceilings complete all as specified and directed.
44M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick Birla wall care putty on plastered surfaces complete all as specified and directed.
45M&L for preparation of newly plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces complete all as specified.
46M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick Birla wall care putty on plastered surfaces complete all as specified and directed.
47M & L for complete removal of existing treatment and applying 1.5mm thick birla white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared surfaces of internal walls complete all as specified and directed.
48M & L for complete removal of existing treatment and applying two coats of weather proof exterior grade paint on prepared surfaces of walls over a coat of primer complete all as specified and directed.
49M & L for preparation of old decorated surfaces of ceiling plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of OBD on ceiling, white or tinted complete all as specified and directed.
50Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each and removing to or from store complete all as specified and directed.
51Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each and removing to or from store complete all as specified and directed.
52M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping including necessary form work weathering slightly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed.
53M& L for providing precast cement concrete 1:2:4 type B1 using 20mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in mortar 1:4 complete all as specified and directed.
54S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and directed.
55S&F 4mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.
56S&F 4mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.
57S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge
58S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge
59M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified
60M&L 2nd class hard wood plain framed panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.
61S&F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc. complete all as specified as directed by Engr-in- charge.
62S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and directed.
63S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
64S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
65Taking out the rolling shutters of any size, including top cover guide channel etc carrying out repairs and re-fixing the same with applying grease etc (New material provided except safety lever locks, ball bearings, gears lath and top cover shall be measured and paid separately ) complete all as specified and directed.
66S&F in repairs Lath 1.25 mm thick & 75 mm wide for rolling shutter complete all as specified and directed.
67S&F in repairs suitable spring for rolling shutter complete all as specified and directed.
68S&F in repairs Guide rail of any size of rolling shutter complete all as specified and directed.
69S&F in repairs Ball bearing of any size for rolling shutter complete all as specified and directed.
70S&F in repairs top cover for rolling shutter complete all as specified and directed.
71S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and directed.
72S & F SS tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as specified and directed.
73S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.
74S & F for stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and directed.
75S & F in repairs 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
76S & F 150 mm length of SS tower bolts of extruded section and fixed complete all as specified and directed.
77S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and directed.
78S&F for 18 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with brass screws and cups to timber frame work complete all as specified and directed.
79S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specified and directed.
80S & F for stainless steel handles, fabricated type, anodised, Size of handle in 75 mm, etc complete all as specified and directed.
81M&L for 2nd class hardwood exc 13 & n exc 25 sqcm Plain fillets. square, rectangular or triangular in section, clean sawn, se cured with nails or brads complete all as specified and directed.
82M&L for preparation of new surfaces of wood or wood based material description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
83S&F in repair of 25 mm dia Drapery curtain rods powder coated decorative type complete all as specified and directed.
84S&F in repair fancy powder coated brackets for 25 mm dia drapery curtain rods complete all as specified and directed.
85S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in repairs complete all as specified and directed.
86Dismantling pvc water tanks of capacity 500 ltr and removing to store complete all as specified and directed.
87S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )of 500 ltr capacity hoisted and fixed in position complete all as specified and directed.
88S & F Vitreous China wash basin with wall hung pedestal, white, flat back, size 630x450mm including cutting for & pinning in ends of brackets or erecting stand but exclusive of fixing of supply of waste pipe fixed in repairs complete all as specified and directed.
89S&F in repair PVC valve less symphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.
90S & F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) (excluding flushing cistern & flush pipe) complete in all respect all as specified.
91S & F in repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white with cascade flush tank (closed pattern including all necessary accessories) complete in all respect all as specified.
92S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
93S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
94S&F in repair Vitreous China soap dish approximate size 160x 160x90mm embedded in the wall Complete all as specified and directed.
95Supply and fix in repair 15 mm bore Bib taps CP brass chromium plated with fancy type single lever, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
96S&F in repair 15 mm dia Stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank and complete all as specified and directed
97S&F in repair 15 mm dia Stop valves, fancy type single lever, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank complete all as specified and directed
98S&F CPVC ball valves, with CPVC lever, screwed both ends to pipes of 20mm bore fixed complete all as specified and directed.
99S & F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and directed.
100S&F PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed in repairs complete all as specified and directed.
101S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed in repairs complete all as specified and directed.
102S & F 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed in repairs complete all as specified and directed.
103S& F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors as waste pipe etc.,, Bore of pipes in 32mm, etc completed all as specified and directed.
104S & F 15mm bore fancy type single lever CP brass Pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, swan pipe, screwed for iron pipe and fixed in repairs
105S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
106S&F in repairs bath room cabinet with mirror PVC size 450x350mm complete all as specified and directed.
107S&F Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed.
108Supply & Fix in repair stainless steel kitchen plate rack ( non magnetic type ) made of 0.85 mm thickness sheet of size 31'' x 36'' x 10'' complete all as specified and directed.
109Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
110S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms) complete all as specified and directed.
111S&F15 mm dia Brass chromium plated shower rose 125 mm size fixed in repairs complete all as specified and directed.
112Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required
113Dismantling of cast iron/AC/PVC pipes 75 mm dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed.
114S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 110 mm, etc complete all as specified and directed.
115M & L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100 mm dia SWG pipe complete all as specified and directed.
116S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls. (At any height of building, till 4 floors also), bore of pipe in 110 mm, etc complete all as specified and directed.
117S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 75 mm, etc complete all as specified and directed.
118S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall. (At any height of building, till 4 floors also), bore of pipe in 75 mm, etc complete all as specified and directed.
119S & F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
120M&L for 110 mm bore PVC( SWR ) bend with oval access doors, including taking down complete all as specified and directed.
121M&L for 75 mm bore PVC( SWR ) bend with oval access doors, including taking down complete all as specified and directed.
122S & F for PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specified and directed.
123S&F PVC (SWR) bends (size of bore 110mm) complete all as specified and directed.
124M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet in 75 mm, etc complete all as specified and directed.
125M&L salt glazed stone wave gully traps square or rounded mouthed tape & fix 150 x 150 mm fixed in cement concrete complete in repairs complete all as specified and directed.
126S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), etc complete all as specified and directed.
127Dismantling fencing wire mesh, any type all as specified and directed.
128S&F 5.60 mm (over all dia) PVC coated GI chain link fencing having 2.80mm dia GI wire and 1.4mm thick PVC coating both side and size of mesh 60mm x 60mm complete all as specified and as directed.
129S&F MS Screw bolts hot dip galvanized machine made with hexagonal or square heads at one end and screwed the other or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nut 5 to 10mm dia meter of neck exc 5cm but n exc 10cm long all as specified and directed.
130S&F 8mm dia and over MS deformed bars, cut to length bent to shape required, including cranking, bending and binding with MS wire(annealed) not less than 0.9 mm dia all as specified and directed
131Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, posts embedded in natural ground, etc complete all as specified and directed.
132Excavation in post holes (or similar holes) each not exceeding 0.5 cum, and getting out in soft/loose soil, including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified.
133M&L for Cement concrete in foundations, filling and mass concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in post hole filling and pavings complete all as specified and directed.
134Excavation in trenches n.exc 1.50m wide and n.exc. 1.50 m depth and getting out in hard/dense soil complete all as specified and directed.
135Returning, filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm complete all as specified and directed.
136Removing excavated materials n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point in soils complete all as specified and directed.
137M&L for 75mm thick plain cement concrete 1 : 3 : 6 mix type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternative bays and finished even and smooth with out using extra cement including necessary form work complete all as specified and directed.
138Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. complete all as specified and directed.
139Taking down existing sub main wiring of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc. complete all as specified and directed.
140M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multistranded copper conductor conforming to IS-694 1990 with ISI marked (for phase ,neutral and earth) drawn in and including non metallic rigid PVC conduit medium grade with ISI mark of minimum 20mm dia and all conduit accessories Concealed including cutting / chases in wall /ceiling /fixed to roof /truss/columns etc and including factory made branded make embossed galvanised steel pressed terminal boxes along with size modular cover plates with frames fixing modular switches, sockets, regulators etc.of suitable size modules and earth wire to be connected to common earth dolly complete all as specified and directed for the following : Note:Location of light points,6 Amp socket points and light fittings may be decided by Engr-in-charge as per site/user requirement.(a) One light /Fan /Bell point controlled by one modular switch 6 Amps one way
141All as per item No 139 above but, One 3 pin Point 6 Amps switch socket outlet point controlled by one switch on the independent board
142All as per item No 139 above but One 3 pin Point 6 Amps switch socket outlet point controlled by one switch on the same board
143All as per item No 139 above but One light point / Fan point/ Bell point controlled by one 5 Amps switch two way
144All as per item No 139 above but with 2.5 sqmm size single core multistranded copper conductor cable for 3 pin 16 Amps Modular switch socket combination outlet on independent board with 2.5 sqmm FRLS insulated and unsheathed copper conductor as earth and connected to earth dolly.
145S&F Modular switch 1 way 6 Amps,1 module all as Specified and directed.
146S&F Modular switch 2 way 6 Amps,1 module all as Specified and directed.
147S&F Modular Type shuttered socket outlet, 3 pin 6A 230 volts 2 modules with ISI mark Complete all as Specified and directed.
148Supply and fix modular switch 1 way 16A,1 module all as Specified and directed.
149S&F Modular Type shuttered socket outlet, 3 pin 6A/16 Amps,230 volts 2 modules with ISI mark complete all as specified and directed.
150Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square blocks complete all as specified and directed.
151S & F Ding Dong AC. 230 volts, single pole complete all as specified and directed.
152S&F Modular switch bell push button 6 Amps 230 volt one way complete all as specified and directed.
153S&F Stepped type electronic modular fan regulator 2-module , 230 Volts AC complete all as specified and directed.
154Supply and fix 20W,decorative, wall mounted, ultra slim, LED lighting fixture size (1224x 43x58)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete with all fixing arrangement etc, complete all as specified and as directed. Cat No : LUMILINEPLUSNEOBS20WLED865SPCSSINDS of Havells / CCS-103-20-65-SL-DP-NWH of Crompton / BCLSB 20 W WH of Bajaj
155Supply and fix 10W,decorative, wall mounted, ultra slim, LED lighting fixture size (550x 23x37)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete with all fixing arrangement etc, complete all as specified and as directed. Cat No: LUMILINEPLUSNEOBS10WLED865SPCSSINDS of Havells / CCS-103-10-65-SL-DP-NWH of Crompton / BCLSB 10 W WH of Bajaj
156Supply and fixing LED Bldg Security Light fitting 25 Watt, 230 V, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp and corrosion resistant including thermal management in multiple optics complete with IP 66 protection separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size complete all as specified and directed by engineer-in-charge. Makes : Cat Nos. ENDURASUNDOWNSL25WLED765PASYBOPC of HAVELLS/ TRP-415-25-57-SL-LM-NBK of Crompton / ENXT P 25L WH PO PC SD of Bajaj
157S&F Bldg Security Light bracket made out of 40 mm bore GI Light grade 1.50 M long to required shape as in bracket for Bldg Security Light fittings fixed with two pair of MS flat iron clamp of size 40 mm X 6 mm thickness of required shape with nuts, bolts and washers, including painting of mild steel flat iron surface with two coats of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.
158Supply, installation, testing, and commissioning of decorative wall-mounted sconce light with antique brass finish and frosted/etched glass shade, suitable for LED lamp up to 9W (holder type E27), including necessary wiring connections and accessories, complete as per site requirements complete all as specified and directed.
159Supply & installation of wall-mounted bedside lamps (decorative sconce) Decorative metal body with antique finish, frosted glass shade, lamp holder B22, suitable for 9–12 W LED warm white; powder-coated back plate; concealed wiring to nearest switch complete all as specified and directed.
160S&F LED 10 Watts reading lamp 2 module suitable for single phase AC Supply fixed on walls with the help of screws complete all as specified and directed. Make: Cat No. 6793 16 of Legrand or techno commercially equivalent make of Bajaj / Philips / Wipro /Havells
161M&L for Sub main wiring with 2 single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing capping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site.
162S&F Sheet metal enclosure (ISI marked) acrylic pre wired distribution board for TPN 4 way , 415 V TPN Acrylic DB, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.
163S&F in replacement Sheet metal enclosure (ISI marked) Acrylic pre wired distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.
164S&F in replacement Sheet metal enclosure (ISI marked) Acrylic pre wired distribution board for 240 volts, SPN 4 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.
165S & F MCB single pole 6 to 32 Amps 240 volts, C Curve, 10 kA rupturing capacity providing in DB complete all as specified
166S & F MCB single pole & neutral 6 to 32 Amps 240 volts, C Curve, 10 kA rupturing capacity providing in DB complete all as specified.
167Supply and fix in repair MCB Triple pole & neutral 40 to 100 Amps 415 volts, C series,10 kA rupturing capacity providing in DB complete all as specified.
168S&F exhaust fan Including making necessary opening for fixings sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, 1200 RPM noiseless, copper winding of sweep 250 mm with self closing louvers and blades as per existing complete fittings all as specified and as directed. NOTE: Quoted rate deemed to be included for providing hole by opening in any type of walls in the building including necessary plastering, grouting of nuts & bolts and washers suitable size and necessary fixing arrangement for fixing louver and including making good to disturbed surface area to its original position.
169Supply & Fixing Electric water heater 5 Star rating vertical type glass line Inner tank plastic outer body PUF insulation of 25 litre storage capacity operating on single phase 230V , AC Supply along with two nos of 15 mm dia heavy duty PVC connections as required length suitable for both inlet & outlet hot water fixed with brass adopter / union washer both sides fixed as per manufacturers instructions, testing and completion complete all as directed. Make : Bajaj Shield series Crest Plus or techno commercially equivalent make and model in Racold , Havells as approved by GE.
170M & L for Galvanized steel water tubing medium grade of 15mm bore complete on walls/floors with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc., including necessary excavation, clips, wall hooks, wooden plugs etc and fitting with existing pipe line of any size complete all as specified and directed at site.
171S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe size of 15mm dia connect between geysers inlet PVC water and inlet GI pipe 15mm dia line including necessary plumbing works, civil works complete all as specified and directed at site.
172S&F 15 mm bore fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
173M&L for cutting to existing pipe line 20/25 mm bore for insertion of tee of size as ordered and GI union 25/20 mm bore complete including required threading to existing pipe for taking out New connection for geyser inlet complete all as specified and as directed.
174Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and accessories,230 V,1200 mm sweep.Min air delivery 210 CFM with service value 6 BEE,Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
175Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point including necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1, funnel with 20 mm dia medium grade GI pipe for water, 15mm dia medium grade protection pipe for GI earth lead complete testing after completion all as specified and directed.
176Supply, fixing,testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminium conductor, 1100 Volt grade on walls with fixing accessories of 25 Sqmm 4 Core all as specified and directed.
177Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation, laying of poles, cables in trenches and getting out in soft/loose soil complete all as directed and specified. Note :- The contractor shall take due care while executing the work to avoid damage to electrical cables, telephone cables, water supply pipelines, etc. In case of any damage or cutting, the contractor shall carry out immediate repairs at his own cost, which shall be deemed to be included in the quoted rates complete all as specified and as directed.
178Supply and lay spread dry clean sand in trenches for cable cushioning complete all as specified and as directed (only punned thickness will be measured and paid )
179Supply and lay common burnt, clay building bricks sub class B of standard size for cable protection in trenches complete all as specified and as directed
180Supply and fixing of kitchen chimney including mounting, ducting up to 3 m length, necessary fittings, electrical connection, testing and commissioning complete as directed by Engineer-in-Charge. Chimney size: 90 cm (as approved), Suction capacity: 1200–1500 m³/hr, SS body with baffle/filterless technology,Duct pipe: 150 mm dia PVC/Aluminium,Including all hardware, fasteners,clamps, bends, sealant, labour and transportation, complete installation and commissioning complete all as specified and directed.
181S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, size of 50 mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc,complete all as specified and directed
182S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, size of 25 mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in floor etc,complete all as specified and directed
183S&F Gun-metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 : 1984, size of 25 mm complete all as specified and directed.
184Cutting of existing GI/DI Pipe and connecting the pipe line with connected items all as specified and directed
185S&F electric water heater, storage type steel body with foroglas coated inner container and heating coil upto 2 KW, 8 bar pressure capacity of 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece, setting automatic operation of water heater for timely On/Off of temp preferences, digital temperature display and provide 7 year warranty for tank, 5 year for coil etc., and 04 No's grouting bolts, nuts & washers grouted on stone wall and making good the distributed grouted surface complete all as specified and directed at site.Make: Havells Model Magnatron or techno commercially equivalent make and model in Bajaj and CG as approved by GE.
186M&L for Submain wiring with two single core PVC (FRLSH) insulated flexible copper conductor cable of size 4 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead complete all as specified and directed. Note: Two runs of copper cable and one run of earth wire and one run of conduit shall be measured and paid as one unit length.
187S&F Socket Outlet 3 pin 15 Amps flush type complete all as specified and directed.
188S&F Switch piano one way 15 Amps flush type complete all as specified and directed at site.
189S&F 240V, 10KA 'C' curve miniature circuit braker (MCB) of SPN and current carrying capacity of 32 Amps in the MCB DB complete with connection testing and commissioning all as specified and directed at site.
190S&F Sheet metal enclosure MCB distribution board, including 200 Amps busbar single pole and neutral 240V, 2 ways, Single door complete all as specified and directed at site.
191S&F Galvanized steel water tubing medium grade of 20mm bore complete on walls/floors with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc., including necessary excavation, clips, wall hooks, wooden plugs etc and fitting with existing pipe line of any size complete all as specified and directed at site.
192S&F gunmetal globe on gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed at site. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58445516
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 41.53 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair Of Single Offrs Accn Qtr No 277/1 & 277/2 (Ff) Of Mh Golconda At New Md Lines And Provn Of Geyser For Jcos/Or Md Accn At Arty Centre Hyderabad Under Ge Golconda
Basic Detail
Tender No 8170/E8
Bidding Type Tender
Location
City Hyderabad
State Telangana
Key Dates
Publish Date 07 Nov 2026
Submission Date 30 Nov 2026
Open Date 02 Dec 2026
Finance
Tender Value 41.53 Lakhs
Tender Fee 500
EMD 84000
Exemption Available
Document List
32f627e4-1a6e-4c0b-8942-9a331d6068e9.html
8170NIT.pdf
8170Tender.pdf
BOQ_895061.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

32f627e4-1a6e-4c0b-8942-9a331d6068e9.html

pdf

8170NIT.pdf

pdf

8170Tender.pdf

xls

BOQ_895061.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender