Tender For special Repair To Bldg No T-408A, Cook House & Dining Hall For 194 Fd Wksp Coy Under Ge Bhopal
Tender Value
16.31 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
6 days left
EMD
33000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-408A, Cook House & Dining Hall For 194 Fd Wksp Coy Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | M&L for 15mm thick rendereing brick or concrete surface in CM 1:4 finishing the surface fair & even without using extra cement including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description. complete all as specified and directed. |
| 3 | M&L for 10mm thick rendereing brick or concrete surface in CM 1:6 finishing the surface fair & even without using extra cement including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description. complete all as specified and directed. |
| 4 | M&L for applying one coat of white wall putty 1mm thick on walls for smooth surfaces complete all as specified and directed. |
| 5 | M&L for dampness rectification on Wall and roof Area :- Surface Preparation: Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level, filling of crack fill paste in visible cracks and apply two coats of DAMP STOP ELASTO (MAKE : BERGER) over finished surface. Necessary scaffolding suitable for height upto 10.00 mtr from average ground level complete all as specified and as directed by Enr-in-charge. |
| 6 | M&L for applying Two or more coats on new work distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed |
| 7 | Dismantling structural steel work including purlins, tursses,etc. complete all as specified and as directed |
| 8 | Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc 40 sqcm and over in section, in any posotion for unframed works complete all as specified and as directed |
| 9 | S&F steel work in tubular/angle trusses including special shaped washers, purlins, rafters, posts etc complete all as specified and directed. |
| 10 | M&L prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick AZ-150 of an colour having tensil strength of 550/MPA as in roof covering/cladding to wall/ ridge,fixed with self tapping screw/L type or J type cranked hook bolts incl dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering. complete all as specified and directed by Engr in Charge. |
| 11 | M&L pre galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick AZ-150 of an colour having tensil strength of 550/MPA as in roof covering/cladding to wall/ ridge,fixed with self tapping screw/L type or J type cranked hook bolts incl dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering. complete all as specified and directed by Engr in Charge. |
| 12 | M&L granite 16-18 mm thick (of any type) work (machine cut) in steps, jambs, pillar, window-cills, cooking platform and like in 15 mm thick cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cm 1:4 including dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed. |
| 13 | M&L for machine cut kota stone slab flooring 20-25mm thick of any size as approved by engr in charge over cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including making the edges bullnosed and rubbing and mirror polishing complete all as specified and directed. |
| 14 | M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) joint free area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed. |
| 15 | M&L for glazed tiles , coloured 300x450 x 6 to 7 mm thick as in skirting/dado over & including 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement incl Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as specified & directed all as specifeid & directed . |
| 16 | S&F 16 mm CPVC pipes SDR 11 and plain CPVC SDR 11 with all necessary fittings and fixed complete to wall and ceiling or laid in floors incl taking down exiting tubing complete all as specified and directed. |
| 17 | S&F 20 mm CPVC pipes SDR 11 and plain CPVC SDR 11 with all necessary fittings and fixed complete to wall and ceiling or laid in floors incl taking down exiting tubing complete all as specified and directed. |
| 18 | S&F in repair for designer bevelled edge frameless looking mirror of selected quality glass of min 6mm thick fixed on wall with screws in any size complete all as specified and directed |
| 19 | S&F in repairs 15 mm pillar taps, fancy type , cast copper alloy, chromium plated, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 20 | S&F in repair 15 mm bib taps, chromium plated , screwed down, screwed for iron pipe or for brass ferrule and fixing complete all as specified and directed by engr in charge. |
| 21 | S&F in repairs 15 mm stop/angle valves, cast copper alloy, chromium plated screwed down high pressure, with crutch or butterfly handle, scrwed both ends for iron pipe or for unions and fixing complete all as specified and directed by engr in charge. |
| 22 | M&L for fabricating and fixing powder coated (Minimum 50 miciron ) aluminium sections of required size for doors, windows any type, frames and partitions including aluminium hinges of required size jointing cleats, screws salsh fasterners , plug for fixing with walls, column etc including taking down damage portion of damage door, windows or taking down complete door/ window complete all as specified and directed. Note :- Rates are inclusive of necessary new fitting for door/ window i.e handle, tower bolt, butt hinges etc complete |
| 23 | M&L framed work such as grills, gratings, gate etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 24 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to uPVC door with beading complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed |
| 26 | Taking down chowkhats or frame with shutter n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 27 | S & F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified, directed. |
| 28 | S & F factory made 100% solid pvc flush shutter 28 mm thick, made from Co- Extruded three layer rigid PVC foam sheet (single Extruded) with density not less that 600 kg/cbm outer layer (0.8-1 mm) thick should be of rigid pvc with density of not less than 1400 kg/cum manufactured by an ISO 9001-2015 certified company. Door should be water proof, Termite proof , fire retardant & having good screw holding capacity complete as per direction of EIC and Manufacturers drawing(Make :- M/s Rajshri Plastiwood/M/s Accucell/M/s Dura plast Extrusion/M/s Sintex Industries) |
| 29 | Taking down chowkhats or frame with shutters exc 1.5 Sqm but not exc. 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed |
| 30 | S&F factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. →Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made. |
| 31 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)proof and & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be included in the item ) Including 100 mm MS butt hinges 03 Nos, MS Handle-02 Nos,, MS tower bolt 150 mm -02 No and alumiium sliding door bolt 250 mm - 01 No Complete all as specified and as directed. to match all as specified and directed |
| 32 | S&F 2nd class wood 30mm thick glazed and skelton shutter open rebeted and prepared to receive glass gauge etc(with sash bar) edges of framing plain champhered or rounded fitted with cut and mitred beads for securiing glass including 100 mm MS butt hinges 03 Nos, MS Handle-02 Nos,MS tower bolt 150 mm -01 No and alumiium sliding door bolt 250 mm - 01 No. and applying. two coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth on wooden surface incl prep. Complete all as specified and as directed. to match all as specified and directed |
| 33 | M&L for preparation new/old steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed |
| 34 | M&L for two coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth on wooden surface incl preparation of surfaces of wooden complete all as specified and directed |
| 35 | S&F in repair 32mm bore PVC waste pipe for kitchen sink /WHB one mtr long complete all as specified and directed. |
| 36 | S&F in repair 100mm dia CP grating (Minium weight 25gms) complete all as specified and directed |
| 37 | S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed |
| 38 | S&F Vitreous China Oval shaped cunter top Wash Basin, white , flat back, Size 550x400mm / std size including waste pipe , coupling, PVC pipe connection 15mm dia 600mm long complete all as specified and directed |
| 39 | S&F China wash down water closet pan (Pedestal Pattern), white , pedestal pan and 'P' or 'S' trap , plastic water closet seat , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed |
| 40 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity with all internal fittings incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified and directed |
| 41 | S&F in repairs PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches , floors or fixed in walls complete all as specified and directed. |
| 42 | S&F PVC (SWR) 110mm bore bends any radius jointed with solvent cement complete all as specified and directed. |
| 43 | S&F PVC (SWR) Junction (Single T) 110mm bore equal or unequal jointed with solvent cement complete all as specified and directed. |
| 44 | M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius, built in CM 1:6 incl Demolition of brickwork or stone/boulder masonry , built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings dressed stonework and precast articeles.all as specified and directed. |
| 45 | S &F in repair Floor door stopper 150mm long of aluminium ally body and tonge , anodised , with hard drawn steel spring, fixed in complete all as specified and directed |
| 46 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation , filling, subbase and mass incl Demolition of cement concrete in floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishesconcrete complete all as specified and directed. |
| 47 | M&L for 75 mm thick PCC 1:3:6 type C-1 , using 20 mm graded stone aggregate in plinth protection, aprons, hard standing, path and like including bitmuminous mastic filling in 1:3 joints(in every 3.00mtr) and finishing the surfaces even and smooth without using extra cement incl Demolition of cement concrete in floors and pavings not exc. 15 Cm thickness (below/above ground level)complete all as specified and directed |
| 48 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl dismantling of existing stone slab tiles. |
| 49 | M&L for precast cement concrete type B1 (20 mm graded aggregates) as in cover slab for manholes etc set in CM 1:4 including demolition of existing cover slab complete all as specified and directed. |
| 50 | supply and fixing factory made 18mm both side laminated HDHMR board in modular kitchen carcasse made of minifix joint with 1mm same colour edge banding including fixed with nut, screws and washers fevicol, nails complete all as specified and directed by Engg-in-charge. Make -: Action Tesa , Greenply or equivalent |
| 51 | S & F fixing factory made 18mm acrylic HDHMR board in modular kitchen shutters with 1mm same edge bending on edges for kitchen cabinets/Cupboards etc. including fixed with nut, screws, washers, nails all as specified and directed by Engr-in-charge. |
| 52 | S & F powder coated stainless steel SS 304 sensys intergrated soft cose hinges having size 103x64mm finish of nicle/silver complete all as specified and directed by Engr-in-charge. |
| 53 | S&F 100 mm stainless steel butt hinges medium weight, cold rolled complete all as specified and directed |
| 54 | S&F 150 mm aluminium handles, D type base plate, anodised complete all as specified and directed |
| 55 | Supply & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling with semi perforated 12 mm thick micro texture with tegular edges tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.85 ( With 50 MM Glass wool ) as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 75-85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x28 mm of length 1200 mm and secondary intermediate cross-T of size 24x28 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With fully perforated 10 mm thick square edged GRG false ceilingMakes- Diamond Ceilings/Armstrong/Hunter Dougles/Gyproc including Dismantling of existing ceiling board. |
| 56 | M&L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor -stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with sheel metal ms flesh box, white cover plate with frame for fixing modular switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- |
| 57 | All as per ser item No 55.00 here-in-before but for 3 pin 6 amp socket outlet on independent board complete all as specified and directed. |
| 58 | All as per ser item No 55.00 here-in-before but one 3 pin socket outlet 6 Amps on same board all as specified and directed. |
| 59 | All as per ser item No 55.00 here-in-before but for 3 pin socket outlet 16 Amps on independent board elect wiring 2.5 sqmm complete all as specified and directed. |
| 60 | All as per ser item No 55.00 here-in-before but wiring with 4 Sq mm copper cable for geyser & AC metel socket industrial box and provision of 4 Sqmm, FRLS PVC insulatedunsheathed multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. |
| 61 | S&F modular switch, single pole, one way 6 Amps, 240V, 50Hz, AC ISI marked complete all as specified and as directed. |
| 62 | S&F in repairs ceiling rose surface bakelite, three terminals 240Vm 50Hz, ISI marked complete all as specified and as directed. |
| 63 | S&F Modular socket outlet 2 module, multipurpose having provision for 2 & 3 pin 6/16 Amp flush type 240V Ac complete all as specified and as directed |
| 64 | S&F Modular Switch piano, single pole, one way, 1 module 16 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. |
| 65 | S&F Modular Socket outlet, 3 module, multipurpose having provision for 6 pin, 16 Amp flush type, 240 volt AC complete all as specified and as directed. |
| 66 | Taking down existing unserveacible fitting any type any size and Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 67 | S & F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 68 | S & F 9 Watt LED Bulb complete all as specified and as directed. |
| 69 | Supply & Fixing 1200mm with BEE 5-star rating complete aerodynamic aluminium blades & body, decorative model with air delivery 220-230 CFM, advanced BLDC 100% copper winding motor with all accessories such as regulator, conneting down rod, clamps, canopy, low noise, RF remote control for all direction sensing, Ribbed blades for high strength, Reverse rotation feature available for circulating warm-air during winter, remote with boost, timer upto 8 hours, sleep, breeze & mop modes, Model should be with ISI marked complete all as specidied and directed by Engineer-in-Charge. Note:-(i) Warranty of BLDC ceiling fan for 2 year & 5 Year of BLDC Motor.(Old Ceiling fan deposited to AGE E/M Yard) |
| 70 | S&F exhaust fan, rust proof steel body AC single phase, 230V of size 450mm sweep with blades and frame and louvers inclusive of all necessary fittings including drillijg of hole and repair of disturbed surface all as specified and directed Note- Old/unserviceable exhaust fan to be deposited at MES store yard |
| 71 | S&F exhaust fan, rust proof steel body AC single phase, 230V of size 300mm sweep with blades and frame and louvers inclusive of all necessary fittings including drillijg of hole and repair of disturbed surface all as specified and directed Note- Old/unserviceable exhaust fan to be deposited at MES store yard Please Enable Macros to View BoQ information |
| 72 | S&F exhaust fan, rust proof steel body AC single phase, 230V of size 300mm sweep with blades and frame and louvers inclusive of all necessary fittings including drillijg of hole and repair of disturbed surface all as specified and directed Note- Old/unserviceable exhaust fan to be deposited at MES store yard Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender