Housing Urban and Rular Development Government Departments Closing in 18 days TDR #58444679

Tender For Construction Of Development Of Ro-Pax Jetty & Allied Infrastructures At Musadiha, Dist-Jagatsinghpur.

Issued by Government Departments · Khordha, Odisha
Tender Value
25.97 Crore
Estimated cost
Bid Submission
27 Nov 2026
18 days left
EMD
25.97 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Construction Of Development Of Ro-Pax Jetty & Allied Infrastructures At Musadiha, Dist-Jagatsinghpur.

BOQ

Name of Work:- Construction of Development of Ro-Pax Jetty & Allied Infrastructures at Musadiha, Dist-Jagatsinghpur.
Sl. No. Item Description
110000583Supplying and fixing of control panel board with all accessories. (UPTO 3HP SINGLE PHASE) Make: KSBGround Floor
210000588Supplying and fixing of HDPE Pipes 32/40 mm (High Density Polyethylene pipes having inner dia. 32mm and outer dia. 40mm) 6Kg/Sq. cm With IS specification.(32MM NOMINAL BORE SIZE). Make Finolex/Oriplast/Supreme/Hariplast.Ground Floor
310000594Supplying and fixing of PVC coated steel rope including cost of material, labour etc. complete. Make-Mahdev/AerolexGround Floor
410000596Supplying and fixing of Finolex/L&T/Cable 4 Sq. mm (3core copper wire flat cable with PVC insulation).Ground Floor
510000600Supplying and fixing of accessories like Nipple, Bore cover, MS clamp, Nut Bolt, Stainless steel nipple, Short piece, GI bend, Socket etc. complete.Ground Floor
610000602Installation charges pump set with all accessories including transportation etc.Ground Floor
710000906\\"Lowering the 150mm dia size PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position,including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials,tools and plant etc.complete and keeping the top of the casing pipe threaded including plugging tubewells to prevent entry of foreign materials from above.Ground Floor
810000926\\"Supplying all labour, tools and plant and jointing materials and lowering the pvc casing pipes,fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore etc complete for hand boring work on costal area as per the direction of the Engineer in charge.Lowering of 50mm dia P.V.C casing pipes.Ground Floor
910000930\\"Supplying all labour, tools and plants and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soils for the following depths excluding supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per the direction of Engineer-incharge.Detail cost per 1 set (0-360mtr)Ground Floor
1010000934\\"Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in the bore around the 50mm dia pvc Casing pipe etc all complete as per the direction of the Engineer-in-Charge excluding the cost of Cement.Detail cost per 1 set (0-360mtr)Ground Floor
1110000938\\"Supplying all labour, tools and plant and materials for cleaning and developing the tubewell with compressor continuously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of the Engineer-in-Charge.(FOR HAND BORING WORK)Detail cost per 1 set (0-360mtr).Ground Floor
1210000940Sinking of ( 150mmx125mm) size gravel packed production well through HAND BORING by WATER JET METHOD in costal areas with PVC casing pipes.\\"Supplying all materials, labour, tools and plant and setting up boring equipments including erection of suitable staging for installation of the required size of tubewell, dismantling and removing the same after completion of the work, includifng transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc. levelling of site all complete as per direction of Engineer-in-charge.Ground Floor
1310000944\\"Supplying all labour, tools land plant and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc. all complete as per direction of Engineer-in-Charge.By Hand boring 0-360 mtr.Ground Floor
1410000948\\"Supplying all labour, tools and plant and jointing materials and lowering the 300mm dia top casing pipes into the positioin and removing the same after use all complete as per direction of Engineerin-Charge.Detail cost per 1 set (0-360mtr).Ground Floor
1510000952\\"Supplying all labour, tools and plant and packing the bore with washed gravel (size P-6) around the pipes in good quality including cost of gravel etc all complete as per the direction of the Engineer-in-charge.Detail cost per 1 set (0-360mtr)Ground Floor
1610001176Supplying of 50mm inner dia PVC casing pipe for deep bore well CD(deep well casing) type basing on IS-12818-2010, wall thick ness 4mm to 4.6mm ,One end of the pipe is male-threaded whereas the other end is a female-threaded socket. Threads are either V-type or trap ezoid-type, and protection caps are provided on the threads to protect the threads in transit.pressure ratings ranging from 7.5 to 20 bar (PN)Make: ORIPLAST/SUPREME/FINOLEX/HARIPLASTGround Floor
1710001182Supplying of 150mm inner dia PVC casing pipe for deep bore well CD(deep well casing) type basing on IS-12818-2010, wall thick ness 9.5mm to 10.7mm,One end of the pipe is male-threaded whereas the other end is a female-threaded socket. Threads are either V-type or trapezoid-type, and protection caps are provided on the threads to protect the threads in transit.pressure ratings ranging from 7.5 to 20 bar (PN)Make: ORIPLAST/SUPREME/FINOLEX/HARIPLASTGround Floor
1810001194Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.2HP,Single phase,40D,14 Stage (head 50-103m) make: KSB(3H/14).Ground Floor
1950010496Supply and fixing of GODREJ MAKE SIDE TABLE MODEL NO-FUPISAST030SXXXX-SideTable(56112105SD00105). [NSWI]Ground Floor
2050010502Supplying and fixing of GODREJ MAKE TV CREDENZA WITH CUP BOARDUNIT MODEL NO-MERAKI Media Unit Brn/Beige 180.4LX49.5DX50.4HCM9(561015 05SD00125).[NSWI]Ground Floor
2150010566Providing, fabricating and installing L shaped executive table,overall sizeof (1800mmx1800mmx750mm)asper theapproveddesign made up 19mm thick BWP ply with 1mm thick laminate finish of approved shade on all exposed surface. Allinternal surfaces shall be finished with balancing laminate of0.8mm thick, matching with the approved shade of laminate intable without any visible joint, groove, with 3nos drawers,1 no cup board,Key board tray provision using 12\\" triple slidetelescopic channel. There should be adequate space for CPU,UPS complete in all respect including necessary fittings,fixtures,transportation, labour, materials, etc. Themeasurement should be taken from the top area. Make:- BWP Ply (Century Sainik 710 / Greenmarine gold 710), Laminate (Greenlam/ Centurylam),Hard warefittings (Godrej).[NSWI]Ground Floor
2250010927Providing and fixing of Storage Cabinet / Cup board made of 18mm WPC Board,ISI Certification Cabinet will have horizontal panel should be finger joints. The door shutter will be fixed using 9 degree auto hinge. The surface of the Cabinet will be finished with gloss finish laminates including 1st quality teak wood moulding and leaping.Cabinet will have provision for door, with lock and key with ISI certification hardware. WPC board:- Greenply Endure/Century , Laminate make:- Century lam/Greenlam ,Marino Hardware fittings- Godrej.Ground Floor
2350010987Providing and fixing Work station of size in plan and height of 0.75mt as per site condition having working desk of 0.75mt height from floor level. The table top should have 19mm BWP grade ply confirming to IS standard of approved make and quality. The top surface and side should be laminated with 1mm thick laminate of glossy/matte finish premium quality of approved shade. Along with cupboard with 1 draw + 1door + CPU stand, etc. All internal surface should be finished with 0.8mm thick internal laminate of white or ivory, the cabinet hinge should be 3D soft close 4H half overlay 9 degree auto hinge(Godrej-2507),telescopic channel will be 12 inch long triple sliding(45kg)(godrej-8174), SS pull handle 100mm x 12mm(Godrej-7782), MP drawer lock(Godrej-8000) and the cost includes all materials, labour, T and P, hardware etc. complete in all respect.(NSWI) Make: BWP Ply(Century Sainik 710/ green marine gold 710), Laminate(Greenlam/ Centurylam/Marino).Ground Floor
2450016631\\"PREMIUM LOUNGE 3 Str CHAIRS: 1)SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated ( DFT 40-60 microns ). The ends should be fitted with ABS moulded end caps. 2)TIE MEMBER: It should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. The tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should be mounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk -- 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. 3)SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover *SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) 4)BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgf for 25% compression of the foam. The complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover. *BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) 5)ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface. Back: (W)52.0 cm x (H)59.0cm x 6.0cm(T), Seat : (W)52.0cm x (D) 50.0cm x 6.0cm(T) Overall Dimensions of Chair Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as - Width-60.5cm and Depth-70.0 cm. Make: godrej\\"Ground Floor
2550016647\\"BRAVO NXT Visitor: 1.SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0.1cm. thick hot-pressedplywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabricupholstery covers and moulded Polyurethane foam. The back foam is designed with contouredlumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort topopliteal area. The chair is available in three models. *PCH-9U01RG/9U02RG/9U12RG SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded withdensity = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. 3. ARMRESTS :The one-piece armrests are injection moulded from black Co-polymer Polypropylene.TUBULAR FRAME (FOR 9U12RG): The powder coated ( DFT 40-60 microns ) tubular frame iscantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. Back: (W)47.5 cm x (H)58.0Cm, Seat : (W)47.0cm x (D) 48.0cm Overall Dimensions of Chair WIDTH (W): 61.4 CM. DEPTH (D): 64.5 CM. HEIGHT (H): 89.5 CM. SEAT HEIGHT (SH): 46.5 CM. Make: Godrej\\"Ground Floor
2650016659\\"SEAT/BACK ASSEMBLY: The seat of THRILL MESH full back with head rest is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are Make- Godrej. SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression.Make- GodrejARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment HEADREST: The Headrest sub-assembly is made up of injection moulded glass filled Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair. The complete headrest assembly is retro fit to the main chair PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors).TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 117.0 - 130.0 CM. SEAT HEIGHT (SH): 44.5 - 54.0 CM. Item Code- 56101522SD04656 + 56101522SD04668\\"Ground Floor
2750016665\\"SEAT ASSEMBLY: The seat of OXBO MID BACK assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 60.5 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. Make- GodrejARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • Upright position locking. • Tilt tension adjustment. Make- Godrej . PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon. Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm. Height - min 89.5 to max 100.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. Item code- 56101522SD03157\\"Ground Floor
2840000985Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
2940000988Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
3040001000Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI/RR/POLYCAB) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK)Ground Floor
3140001003Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI/RR/POLYCAB) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK)Ground Floor
3240001012Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI/RR/POLYCAB) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK)Ground Floor
3340001129Supplying and fixing of 6\\"X4\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam)Ground Floor
3440001132Supplying and fixing of 8\\"X6\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam)Ground Floor
3540001135Supplying and fixing of 8\\"X10\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam)Ground Floor
3640001145Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
3740001154Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
3840001166Supply and fixing of 63 AMP 4P MCB-1NO,63 AMP,415 V CUTOUT-3 NOS WITH COPPER BUS BAR & INDICATOR ETC including all accessories and connections . [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK]Ground Floor
3940001172Supply of U-type fan hook(Make-TATA)Ground Floor
4040001193Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells)Ground Floor
4140001234supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
4240001304Earthing with Cupper plate 600 mm x 600 mm x 3.15 mm thick 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing)Ground Floor
4340001876Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic)Ground Floor
4440001879Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK)Ground Floor
4540001987Supply and laying of 10 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Make-Cable-FINOLEX/ HAVELLS/ POLYCABGround Floor
4640002158Supply and fixing of 10 sq.mm 04 core PVC Al. Arm Cableof 1.1 KV grade end termination.Ground Floor
4740008024Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex )Ground Floor
4840008128Supply and fixing of 300 mm sweep exhaust fan domestic with connecting wire and all accessories including fixing and connections as per instruction of Electrical Engineer-in-charge. [MAKE- USHA MODEL-AEROCLEAN LD EXT FAN GBD/ CROMPTON MODEL-TRANSAIR/V-GUARD MO DEL-SHOVAIR S12(LIGHT DUTY)/HAVELLS/ANCHOR-PANASONIC)Ground Floor
4940008142Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER)Ground Floor
5040008158Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO)Ground Floor
5140008243Point wiring for 2nos 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required as per direction of Engineer in charge . (Make of wire Finolex / L &T / Anchor / Havels/ V guard) Make-switch/Socket-Legrand/ Wipro-North west/ Anchor/ havells/ Panasonic)Ground Floor
5240009312Supply and installation of 1.5Tr.(5 Star) Inverter Split type Air Conditioner with supply and fixing of 4 KVA ,130-280 Volt voltage range wall/floor mounted stabiliser including all accessories,fastner angle copper piping up to 10ft & connections MAKE of A.C. – CARRIER MODEL NO-EMPERIA DXI/BLUE STAR MODEL NO-IA518ENU/AKABISHI(MITSUBISHI)MAKE OF STABILIZER- AUTOTEK/V-GUARD/MICROTEKGround Floor
5340010758Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- PANASONIC(MODEL NO-PBTM012 07)/HAVELLS(MODEL NO-PHOTON ULTRA)/CROMPTON(MODEL NO-CCS-102-20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4'/ WIPRO(MODEL NO-LL20-221-XXX-65NE3)Ground Floor
5440011143Supply & fixing of 70 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make-PANASONIC(MODEL-PSTM22708)/HAVELLS(MODEL-ENDURA SUNDOWN70W)Ground Floor
5540011144Supply and fixing of 8 Watt Mirror light connecting wire, and all accessories and connections as per instruction of Electrical Engineer-in-charge.( Make- PANASONIC/HAVELLS)Ground Floor
5640011787Supply and fixing of on 15 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON(MODEL NO-LSCRM-15W-CDL/LSCSM-15W-CDL)/ PHILIPS(MODEL NO-15W DURASLIM ROUND/SQUARE 165MM/WIPRO(MODEL NO-LD80-131-XXX-60-XX)/PANASONIC MODEL NO-PPAM12156BS/HAVELLS MODEL NO-OCTANE)Ground Floor
5740012019Supplying and laying of 25x5 GI earth strip ISI marked on Surface or recess for connection etc as required.Ground Floor
5840012021Supplying and laying of 25x5 Copper strip ISI marked on Surface or recess for connection etc as required.Ground Floor
5940012084Recessed wiring to (GROUP-C)Light Point/fan point/exhaust fan point/call bell point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
60MIS-CVL-APPROACHJE
6150010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
6250016443Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. FOR BASEMENT FROM 4.5M TO 7.5M DEPTH BELOW G.L)(AS PER ANALYSIS OF RATES 2006)PAGE NO--68Ground Floor
6350016767Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concreteGround Floor
6450016769Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access plat form.Ground Floor
6550016777Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantileversGround Floor
6650016811Centering and shuttering including strutting, propping etc. and removal of \\"Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. \\"Ground Floor
6750016841Boring through all types of soils, boulders, hard starta and rocks etc.. for 1000mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Ground Floor
6850016843Providing and fabricating M.S.liners of specified thickness for required length with M.S. shoes of 1.0m height using 12mm thick M.S plates for bored vertical pile measured from cut off level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories, all taxes, hire and running charges of all machineries, royality , labour, materials, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Ground Floor
6950016845Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for piling gantry, labour, setting up the rig to alignment and correct dimensions and erecting liner and reinforcement cage as shown in the drawing and as directed by the EIC.Ground Floor
7050016847Chipping/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.Ground Floor
7150016851Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.Ground Floor
7250016865Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) (Taking centring 1.5Sqm/1Cum)for below Ground level 4.5mt to 7.5 mt(basement)Ground Floor
7350016871Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement.Ground Floor
74MIS-CVL-APPROACHRO
7550001242\\"Earth work in ordinary soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying and layers not exceeding 0.3m. in depth. \\"Ground Floor
7650013554Loosening, Levelling and compacting the original ground supporting to embankment to facilitate placement of 1st layer of embankment scarified to a depth 150mm, mixed with water at OMC and compacted to achive minimum dry density as given in table 300-2 and Clause 305 of MoRT &H Specifications for Road & Bridge Works .(AR-P/158/37)Ground Floor
7750013578Providing, Laying, spreading & compacting graded stone aggregate of to W.M.M. specifications including premixing material with water at OMC in mechanical mix plant and carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with VRR to achive the desired density as per Clause 406 of MoRT&H specifications for Road & Bridge Work (4th Revision).(AR-P-166/42).Ground Floor
7850016857Construction of subgrade and earthen shoulders with approved material obtained from borrowpits having CBR not less than 8% with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300-2.Ground Floor
7950016859Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)Ground Floor
8050016861Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table 600.1, cement content not to be less than 150kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver and compacting with vibratory roller, finishing and curing as per Clause 601 of MoSRT&H Specifications for Road & Bridge works (4th Revision)Ground Floor
8150016863Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing and as per Clause 602 of MoSRT&H Specifications for Road & Bridge works (4th Revision)Ground Floor
82MIS-CVL-AREAFILLIN
8350001726Supplying, filling or Spreading of filling sand by mechanical means including cost of all labour,material T & P etc. complete as per the direction of Engineer-in-charge.Ground Floor
84MIS-CVL-CHAMBER
8550000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
8650000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
875000002216mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
8850000488Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and PlinthGround Floor
8950001242\\"Earth work in ordinary soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying and layers not exceeding 0.3m. in depth. \\"Ground Floor
905000171912mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete.Ground Floor
9150010396Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING)Ground Floor
9250010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
93MIS-CVL-DREDGING
9450018053Desilting by Dredging from river /nallah for depths varying from 1.00m to 3.00 m including fixing of pipelines , Floaters and floating pipelines for disposing of water slurry consisting of all kinds of soil including medium fine sand & coarse sand with gravelly earth . The rate shall include the cost of labour , materials , consumables POL, spare parts and accessories to keep dredger , T&P etc. including building in the island by providing geo tubes and accessories or by tin sheets for information of bund for dumping of dredged material with all lead and lift excluding GST as per direction of the Engineer-in-Charge .The job includes all pre and post dredging surveys for payment purpose. Disposal Distance upto 1500mGround Floor
95MIS-CVL-LANDINGJET
9650010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
9750016443Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. FOR BASEMENT FROM 4.5M TO 7.5M DEPTH BELOW G.L)(AS PER ANALYSIS OF RATES 2006)PAGE NO--68Ground Floor
9850016767Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concreteGround Floor
9950016769Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access plat form.Ground Floor
10050016777Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantileversGround Floor
10150016811Centering and shuttering including strutting, propping etc. and removal of \\"Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. \\"Ground Floor
10250016841Boring through all types of soils, boulders, hard starta and rocks etc.. for 1000mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Ground Floor
10350016843Providing and fabricating M.S.liners of specified thickness for required length with M.S. shoes of 1.0m height using 12mm thick M.S plates for bored vertical pile measured from cut off level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories, all taxes, hire and running charges of all machineries, royality , labour, materials, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Ground Floor
10450016845Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for piling gantry, labour, setting up the rig to alignment and correct dimensions and erecting liner and reinforcement cage as shown in the drawing and as directed by the EIC.Ground Floor
10550016847Chipping/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.Ground Floor
10650016851Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.Ground Floor
10750016865Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) (Taking centring 1.5Sqm/1Cum)for below Ground level 4.5mt to 7.5 mt(basement)Ground Floor
10850016871Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement.Ground Floor
109MIS-CVL-MAINJETTY
11050010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
11150016443Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. FOR BASEMENT FROM 4.5M TO 7.5M DEPTH BELOW G.L)(AS PER ANALYSIS OF RATES 2006)PAGE NO--68Ground Floor
11250016767Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concreteGround Floor
11350016769Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access plat form.Ground Floor
11450016777Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantileversGround Floor
11550016811Centering and shuttering including strutting, propping etc. and removal of \\"Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. \\"Ground Floor
11650016841Boring through all types of soils, boulders, hard starta and rocks etc.. for 1000mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Ground Floor
11750016843Providing and fabricating M.S.liners of specified thickness for required length with M.S. shoes of 1.0m height using 12mm thick M.S plates for bored vertical pile measured from cut off level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories, all taxes, hire and running charges of all machineries, royality , labour, materials, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Ground Floor
11850016845Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for piling gantry, labour, setting up the rig to alignment and correct dimensions and erecting liner and reinforcement cage as shown in the drawing and as directed by the EIC.Ground Floor
11950016847Chipping/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.Ground Floor
12050016851Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.Ground Floor
12150016865Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) (Taking centring 1.5Sqm/1Cum)for below Ground level 4.5mt to 7.5 mt(basement)Ground Floor
12250016867Supplying, handling, transporting and fixing in position of Cast iron Bollard (20T ton capacity)with necessary cutting, concrete chipping, drilling, grouting, welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour , consumable items etc. complete as per drawing and specifications as directed by the EIC.(MANUFACTURE AND SUPPLY OF HI TECH CAST IRON HBL 20 TON T-TYPE BOLLARD WITH ANCHOR FASTENERS SIZE-HBL 20T CI (DRAWING NO-HEL/INQ/T-25-728/DWG/02/251225/REV00))Ground Floor
12350016869Supplying, handling, transporting and fixing in position of fender with anchor bolts, U hooks, Chains,shall be hot dip G.I coating with 80micron including cutting, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour, consumable items, machineries, tools, tackles,transportation etc... and complete as per Engineer Incharge. (MANUFACTURE AND SUPPLY OF HI TECH HNC 700H DUAL CONE FENDERING SYSTEM WITH FRONTAL FRAME,ANCHORE FASTENERS U-HOOKS AND ACCESSORIES SIZE-HNC 700H DUAL CONE)(DRAWING NO-HEL/INQ/T-25-728/DWG/01/251228/REV 00)Ground Floor
12450016871Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement.Ground Floor
125MIS-CVL-PARKINGARE
12650001471Supplying all materials, labour and T&P and providing cement concrete (1:3:6) with 40 mm size crusher broken hg metal, screened and washed sharp sand including cost, conveyance and royalty as per direction of Engineer-in-charge.Ground Floor
12750001701Providing and laying 80 mm thick Factory made cement concrete interlocking Paver block of M40 grade made by block making machine with strong vibratory compaction and approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of coares sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-In-Charge.Ground Floor
12850016849Sand filling compacted to 95% Relative density as per the requirement at site.Ground Floor
129MIS-CVL-RAMP
13050010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
13150016443Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. FOR BASEMENT FROM 4.5M TO 7.5M DEPTH BELOW G.L)(AS PER ANALYSIS OF RATES 2006)PAGE NO--68Ground Floor
13250016767Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concreteGround Floor
13350016769Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access plat form.Ground Floor
13450016777Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantileversGround Floor
13550016811Centering and shuttering including strutting, propping etc. and removal of \\"Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. \\"Ground Floor
13650016841Boring through all types of soils, boulders, hard starta and rocks etc.. for 1000mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Ground Floor
13750016843Providing and fabricating M.S.liners of specified thickness for required length with M.S. shoes of 1.0m height using 12mm thick M.S plates for bored vertical pile measured from cut off level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories, all taxes, hire and running charges of all machineries, royality , labour, materials, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Ground Floor
13850016845Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for piling gantry, labour, setting up the rig to alignment and correct dimensions and erecting liner and reinforcement cage as shown in the drawing and as directed by the EIC.Ground Floor
13950016847Chipping/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.Ground Floor
14050016851Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.Ground Floor
14150016865Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) (Taking centring 1.5Sqm/1Cum)for below Ground level 4.5mt to 7.5 mt(basement)Ground Floor
14250016871Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement.Ground Floor
143MIS-CVL-SEPTICTANK
14450000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
14550000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
14650000018\\"4\\"\\" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. \\"Ground Floor
14750000019\\"25mm. thick A.S. Flooring with cement concrete 1:2:4 including punning using 12mm. size hard granite chips including cost of all materials T & P etc complete. \\"Ground Floor
1485000002216mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
14950000488Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and PlinthGround Floor
15050001242\\"Earth work in ordinary soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying and layers not exceeding 0.3m. in depth. \\"Ground Floor
1515000171912mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete.Ground Floor
15250001806F.A brick masonary work in cement mortar (1:4) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.(IN FOUNDATION & PLINTH)Ground Floor
15350010360Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB)Ground Floor
15450010420Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES)Ground Floor
15550010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
156MIS-CVL-WAITINGHAL
15750000008\\"Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. \\"Ground Floor
15850000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
15950000018\\"4\\"\\" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. \\"Ground Floor
1605000002012mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
161500000216mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces.Ground Floor
1625000002216mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
16350000044Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ).Ground Floor
16450000057Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height.Ground Floor
16550000488Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and PlinthGround Floor
16650000490Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure.Ground Floor
16750000495Fly Ash brick masonry in cement mortar 1:4 (1 cement:4sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75 kg per sq. cm with dimensional tolerance +/-2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure.Ground Floor
16850000964Supplying,fitting & fixing of grinite tile 10 mm thick above 0.1 sqm & upto 0.4 sqm in floors,treads rise and landing on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete.Ground Floor
16950001242\\"Earth work in ordinary soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying and layers not exceeding 0.3m. in depth. \\"Ground Floor
17050001471Supplying all materials, labour and T&P and providing cement concrete (1:3:6) with 40 mm size crusher broken hg metal, screened and washed sharp sand including cost, conveyance and royalty as per direction of Engineer-in-charge.Ground Floor
17150004596Supplying, fitting and fixing of Stainless steel of 316 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.JINDAL / NIPPON STEEL [NSWI]Ground Floor
17250010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
17350010518Supplying fitting fixing of GRG ready made cornices of 100 mm thick including screw and adhesive to all the cornices. Make:-Aerolite/Ramco Hilux board .Ground Floor
17450010530Providing, Fitting and Fixing of two track (67mmx 54mm) height below 1.5 Mtr.UPVC glazed sliding window of Premium quality with frames and sashes shall be from white UPVC profile.All section of frame and sashes shall be reinforced with galvanized steel in single continuous length, holes about 8mm dia. to be provided @ 300mm C/C outer side of lower sashes, window shall be such that glazing or deglazing on site possible without the need to remove the outer frame from the structure of the building. Glazing must be used 5mm thick reflective glass with weather seal. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners. After fixing frame the gap in between the frame and wall should be filled with silicon sealant for inner frame sealing complete with all fixtures in all respect. UPVC Window make:-DUROPLAST / SIMTA ASTRIX / NCL VEKA, All GLASS work:- Saint-Gobain/AIS (ASAHI).Ground Floor
17550010542Providing, Fitting and Fixing of three track (122mmx 54mm) height below 1.5 Mtr.UPVC glazed sliding window Premium quality with frames and sashes shall be from white UPVC profile. All section of frame and sashes shall be reinforced with galvanized steel in single continuous length, holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes, window shall be such that glazing or deglazing on site possible without the need to remove the outer frame from the structure of the building. Glazing must be used 5mm thick reflective toughened glass with weather seal. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap in between the frame and wall should be filled with silicon sealant for inner frame sealing complete with all fixtures in all respect. UPVC Window make:-DUROPLAST / SIMTA ASTRIX / NCL VEKA, All GLASS work:- Saint-Gobain/AIS (ASAHI).Ground Floor
17650010554Providing, supplying and fixing of UPVC Glazed Fixed Louvered Ventilator of size 600 mm X600 mm made out of multi chambered UPVC of DUROPLAST / SIMTA ASTRIX / NCL VEKA having isolated drainage, holes about 8 mm dia. to be provided @ 300 mm C/C outer side of lower sashes and reinforced with Galvanized Iron profiles throughout the window with Fan(185mm)of USHA / CROMPTON/Havells/Anchor. The outer frame having an overall size of 39 mm x 39 mm x 2.2 mm thickness with reinforcement of 1.2 mm . Ventilator shall be provided with 4 mm Pin Head glass, standard hardware. Wall thickness of frame and Mullion shall be 2.4 mm, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work with transportation and wastage.Ground Floor
17750010572Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500)Ground Floor
17850010584Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900)Ground Floor
17950010596Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC).Ground Floor
18050010608Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean).Ground Floor
18150010620Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY)Ground Floor
18250010644Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel).Ground Floor
18350010656Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink)Ground Floor
18450010668Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/GreenGround Floor
18550010680Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej).Ground Floor
18650010704Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej).Ground Floor
18750010716Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing.Ground Floor
18850010741Providing, Fixing and Fitting Ceramic glazed tiles on wall of size 300mmx450mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T and P required for the work, etc. complete in all respect. [NSWI] Tile make:-VARMORA/ NITCO / RAKGround Floor
18950010753Providing, Fixing and Fitting Anti-skid vitrified floor tiles of size 300mm x 300mmx9mm laid over 25mm thick Cement mortar (1:1) laid in proper slope and filling joints with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T and P required for the work, etc. complete in all respect. [NSWI] Tile make:-NITCO/RAK/VARMORA , Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout).Ground Floor
19050010767Supplying, Fitting and Fixing of 10 mm thick Digital Glazed Vitrified Tile on floor of size 600mm x 600mm of approved shade laid on 25 mm thick cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T and P etc. required for the works all complete (For new work only). [NSWI] Tile make:-NITCO/RAK/VARMORA , Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout).Ground Floor
19150010813Supplying, Fitting and Fixing Industrial Parking Vitrified Floor Tile of 10mm thick (SIZE 300X 300MM)on parking of approved shade laid on 25 mm thick cement mortar (1:1) and filling joints with epoxy grout (2mm) of approved quality including cost of all materials, labour T and P etc required for the works all complete. (For new work only) [NSWI]. Tile make:-NITCO/RAK/VARMORA , Epoxy Grout make:- ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout).Ground Floor
192500108152.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete.Ground Floor
19350010839Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX.Ground Floor
19450010915Providing, fitting and fixing of Gypsum false ceiling with Aluminium anodised T section no. 3215 with 2feet center to center, L section no. 1705 up to 15 microns on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2 feet x 2 feet suspended from ceiling etc. complete including cost of 12.5mm thick Gypsum board, all labour and material etc. complete. Aluminium Sections make:- FINESTA/HINDALCO/JINDAL, Gypsum board Make:- India Gypsum (SAINT GOBAIN) / USG Boral .Ground Floor
19550012781Providing & applaying Sika top seal 109 HI over roof slab and parapets before application of SIKA Top seal 109HI the surface should be prime with SIKA 109HI primer , SIKA Fab 1 shall be laid between the coats of water proofing membrame , the entire application cover with SIKA TOP seal HI CC (curing compound) including cost of all materials ,Conveyance, labour, T&P etc. complete in all respect. Make:- SIKAGround Floor
19650014440Providing and laying in position R.C.C. M-35 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC ROOF SLAB)(Centring taken 10 Sqm/1Cum RCC)Ground Floor
19750014452Providing and laying in position R.C.C. M-35 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC COLUMNS) (Centring taken 10Sqm/1Cum RCC)Ground Floor
19850014464Providing and laying in position R.C.C. M-35 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC SILL BAND) (Taking Centring 5Sqm/1Cum RCC)Ground Floor
19950014488Providing and laying in position R.C.C. M-35 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR LINTEL BEAM)(Taking centring 14 sqm/1Cum RCC)Ground Floor
20050014500Providing and laying in position R.C.C. M-35 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR RCC CHHAJA & SHELVES)Ground Floor
20150014524Providing and laying in position R.C.C. M-35 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR TIE BEAM) (Taking centring 5sqm/1Cum RCC)Ground Floor
20250014526\\"Providing and laying in position R.C.C. M-35 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR RCC FLOOR BEAMS)(Taking 8sqm/1Cum RCC)Ground Floor
20350014538Providing and laying in position R.C.C. M-35 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC FINS)Ground Floor
20450016053Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) (Taking centring 1.5Sqm/1Cum)Ground Floor
20550016443Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. FOR BASEMENT FROM 4.5M TO 7.5M DEPTH BELOW G.L)(AS PER ANALYSIS OF RATES 2006)PAGE NO--68Ground Floor
20650016843Providing and fabricating M.S.liners of specified thickness for required length with M.S. shoes of 1.0m height using 12mm thick M.S plates for bored vertical pile measured from cut off level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories, all taxes, hire and running charges of all machineries, royality , labour, materials, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Ground Floor
20750016845Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for piling gantry, labour, setting up the rig to alignment and correct dimensions and erecting liner and reinforcement cage as shown in the drawing and as directed by the EIC.Ground Floor
20850016853Boring through all types of soils, boulders, hard starta and rocks etc.. for 450mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Ground Floor
20950016855Chipping/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 450mm dia piles as directed by the Engineer-In-ChargeGround Floor
21050016865Providing and laying in position R.C.C. M-40 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) (Taking centring 1.5Sqm/1Cum)for below Ground level 4.5mt to 7.5 mt(basement)Ground Floor
211MIS-CVL-WATERPURIF
21250008261Supplying and fixing Aquaguard Storage Cooler–Cum-Purifier (80 Ltr. Capacity ) with all cost complete.[N.S.W.I]Ground Floor
213MIS-INE-AREALIGHTI
21440001033Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI/Gloster)Ground Floor
21540001126providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18)Ground Floor
21640001367Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI)Ground Floor
21740002149Supply and laying of 6 sq.mm 4 core copper flexible cable .(Make- Cable-Finolex/Havells/Polycab)Ground Floor
21840002155Supply and fixing of 16 sq.mm 04 core PVC Al. Arm Cableof 1.1 KV grade end termination.(Brass compression)Ground Floor
21940002349Supply & errection of 8.0 Mtr galvanized Octagonal pole ,continuosly tapered,single piece,3mm thick,The face to face dimension is 130mm at bottom and 70mm at top dia.base plate.size is 200 x 200 x16 mm thick The pole should be manufactured from special steel plate suitable for lighting Arrangement System ,Galvanized Founation bolt specification of bolt length 600mm circle dia 200mm bolt size 20mm,Template size is 200mm PCD,thickness 3mm with 10/4 Bakelite Cover,63 Amp 4 way Stud Connector-01No,10 Amp SPMCB-01 No,MCB Channel-01 No,Mudguard Nut,Bolt & washer-06 Nos,Aluminium Socket-08 Nos.(make-Bajaj/RR-ISPAT/Vankal/Utkarsh)Ground Floor
22040002353Supply and fixing of 1mtr. Long Galvanized deocartive single arm welded with top canopy at an angle of 120 degree with the pole.The outer dia of arms are 46mm,4 nutbolts suitable for 70mm Top.Ground Floor
22140002497Supply of outdoor type auxillary panel board made out from 20guage thick CR Sheet duly painted with clamping arrangement to be fixed on street light pole equipped with 04 nos bus bar 03 nos indication lamp with 1 No toggle switch ,1 no timer switch , 1 No Stud type 4 way terminal I/P) 63 Amp ) 1 No 63A TPN MCB, 1 No 3 Pole Contractor 65 A, 1 No Single Pole MCB 10A, 3 Nos 16 amp TPN MCB , 3 Nos Stud type , 4 way terminal (O/P) 63A A with earthing arrangement [Make-(a)MCB /MCCB - Legrand/ Schnider/L &T/ ABB, ( b)Volt meter, Ammeter-AE/CAPPA, (d) all other acessories ISI mark]Ground Floor
22240003041Supply, installation, testing and commissioning of GI coil earthing including excavation of earth pit in all kinds of soil/rock filling with charcoal & salt, connections to earthing stids/ bolt of the pole complete including all accesories and connections.Ground Floor
22340005870Supply and laying of 25 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI MarkedGround Floor
22440008291Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing)Ground Floor
22540010339Supply, delivery, errection, testing & commissioning of 20 Meter , 20 sided polygonal hot dip galvanized high mast suitable for wind velocity of 250 KM/HR wind speed or more. The high mast must be supplied in two sections .The top dia and bottom dia of high mast should be 150 mm and 610 mm respectively . The thickness of top and bottom section should be 5 mm and 6 mm respectively . It shall include all accessories like head frame, Two points suspension system with steel wire rope of 6 mm dia, double drum winch ,galvanized lantern carriage with 8 nos. 300 wt LED flood light fitting having die cast aluminium controlgear box complete with ignitor & capacitor. The high mast to be supplied along with LED aviation obstruction light complete with all accessories, lightening final, integral power tool ,1.5 HP motor, EPR trailing cable installed inside the base compartment. 12 nos. 1200mm length foundation bolts for foundation. .outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP conta ctor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals. The scope of work also includes to construct RCC foundation , Erection of high mast, installation of feeder pillar, 2 nos. earthing with 2.5 mtr long 40 mm dia GI earth electrode. . The high mast to be supplied along with double drum winch . Wind tunnel report of high mast shaft should confirm the force coefficient and the mast must be suitable for 250 Km/HR wind speed or more. The entire high mast lighting system should be warrantied for a period of 2 years from the date of handing over . (Make- of Luminaries- Crompton Greaves/ Philips / Wipro/havells/panasonic))(Make of mast-RR ispat/Bajaj/Utkarsh/Vankal)Ground Floor
22640011143Supply & fixing of 70 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make-PANASONIC(MODEL-PSTM22708)/HAVELLS(MODEL-ENDURA SUNDOWN70W)Ground Floor
22740011619Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- PANASONIC(MODEL NO-PSTM22908)/HAVELLS(MODEL NO-ENDURA SUNDOWN90W)/CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XXGround Floor
22840012278Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thicknessGround Floor
229MIS-INE-CCTVSURVEI
23040000982Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
23140001126providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18)Ground Floor
23240002095Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL/VTR All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.Ground Floor
23340003013Supply Wireless Mouse (Make- Logitech)Ground Floor
23440003492Supply,Installation of 3 core 2.5 sqmm cable in rigid PVC pipes per runing meter (Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK)Ground Floor
23540008495Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL)Ground Floor
236400103134MP WDR 32x IR Network PTZ Camera: 1/2.8\\" 4MP CMOS Image sensor (0.9071 centimeters), Max. 50/60fps@4MP, Powerful 32x Optical zoom and 16x Digital zoom, WDR(120dB), 2D/3D-DNR, Day/Night (ICR), EIS, Electronic Defog, ROI, AGC,AWB, BLC, HLC, IR Range of 150 Mtr., Max 300° /s pan speed, 360° endless pan rotation, Support Face Detection, Make - CP Plus/ PramaGround Floor
23740010331Supply , Installation of PVC IP55 Junction BoxGround Floor
23840010403Supply , Installation, testing , commissioning of 8 Port Giga Eth Unmanaged PoE Switch with 6KV surge protection , 150 Watt . Make- Netgear/Juniper/ArubaGround Floor
23940010407Supply , Installation, Testing of 8 TB Surveillance HDD, Make- SEGATE/WDGround Floor
24040010410Supply , laying of Solid Cat 6 Outdoor Armed (ECCS Tape) Cable Make- D-link/DigisolGround Floor
24140011089Supply , Installation, testing , commissioning of 4Ch. 4K Network Video Recorder(Instastream/H.265/Smart H.264+/H.264/MJPEG codec decoding, Support 1 SATA HDDs up to 10TB Each,Support Multi-brand network cameras) Make - CP Plus/ PramaGround Floor
24240012266Supply,lnstallation,testing & Commissioning of 32\\" Led display panel. N.B- The display must be commercia product category having 3 years of onsite warranty. Make-Samsung/LG/PanasonicGround Floor
24340012278Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thicknessGround Floor
24440012284Supply , Installation of RJ45 Connector Make-D-link/Digisol/MolexGround Floor
24540012296Supply and fixing of 1275VA inverter with 12 volt 150AH Tall tubular Battery including trolly with all accessories and Connections (Make-Inverter-MICROTEK/LUMINOUS)/Battery-(Make-Exide/Luminous(6EL150)Ground Floor
24640012473Supply of 15 Meter High Speed HDMI Cable Approved Make: MX/ Liberty/ Kramer/ ExtronGround Floor
24740012786Supply , Installation, testing , commissioning of 4MP Full HD WDR IR Network Bullet Camera featuring a 1/3\\" or 1/2.9\\" CMOS sensor, motorized 2.7-13.5mm lens for 4MP video at 25/30fps, H.265+/H.264+ compression, 120dB WDR, Min-50m IR range, IP67/IK10, Micro SD, PoE. Make - CP Plus (CP-UNC-TC41ZL6C-VMD-LQ)/ Prama (PT-NC346P1-WNRAM-D2)Ground Floor
24840012788Supply , Installation, testing , commissioning of 4MP Full HD WDR IR Network Dome Camera featuring a 1/3\\" or 1/2.9\\" CMOS sensor, motorized 2.7-13.5mm lens for 4MP video at 25/30fps, H.265+/H.264+ compression, 120dB WDR, 30m IR range, IP67/IK10, Micro SD, PoE. Make - CP Plus (CP-UNC-VC41ZL5C-VMD-Q)/ Prama (PT-NC347P1-WNRAM-D2)Ground Floor
249MIS-INE-TELECOMMUN
25040013298Supply and installation of VHF Handheld Walkie Talkie (5W, rugged, rechargeable, licensed band) Motorola Solutions (Motorola CP200d (VHF))Ground Floor
25140013300Supply and installation of Standard Li-ion Battery (spare or replacement pack)Ground Floor
25240013302Supply and installation of Desktop Single/Multiple ChargerGround Floor
25340013304Frequency programming, labeling, and testingGround Floor
254MIS-IPH-WAITINGHAL
25510000294Laying in trenches OD PVC pipes and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete. 110mm dia OD P.V.C SWR double socket pipes (ISI TYPE-A),Analysis is done as per AR-2013,SL NO-2.3.2 .Ground Floor
25610001056Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes.Ground Floor
25710001058Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes.Ground Floor
25810001060Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes.Ground Floor
25910001062Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 50 mm outer dia CPVC pipes.Ground Floor
26010001064Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm).Ground Floor
26110001066Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm).Ground Floor
26210001068Providing and fixing on wall face PVC 110 mm dia. offset SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. offset PVC SWR type.Ground Floor
26310001070Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type.Ground Floor
26410001072Providing and fixing on wall face 110mm dia. plain bend PVC SWR type moulded fittings / accessories for Rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Plain Bend PVC SWR type.Ground Floor
26510001074Providing and fixing on wall face 110mm dia. bend with door PVC SWR type moulded fittings / accessories for rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Bend with door PVC SWR type.Ground Floor
26610001076Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type.Ground Floor
26710001078\\"Fixing 110mm dia GULLY Trap P.V.C SWR TYPE of self cleaning design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors all complete as per specification. make: ORIPLAST/SUPREME/FINOLEX. 110mm Dia Gully trap PVC SWR typeGround Floor
26810001084Providing and fixing 110 mm dia. PVC SWR P-Trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. P - trap PVC SWR type.Ground Floor
26910001088Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall.Ground Floor
27010001094Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm.Ground Floor
27110001096Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete, with cement concrete (1:3:6) and 12mm cement plaster (1:3) along with Cement punning.Ground Floor
27210001098\\"Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX \\"110mm Dia Inlet & Outlet floor trap PVC SWR type.Ground Floor
27310001100Providing and fixing EWC Commode floor mount(S/P trap) conforming to IS 2556: Part 3- 2004 duly fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification without cistern - Long pattern size 575x345x390mm. Make: Hindware POPULAR (CAT NO-20044 S-TRAP-28.5/P-TRAP-18.0)/Parryware ELITE (P-TRAP-CO278/S-TRAP-CO297) White Vitreous China Wash Down Water Closet (EWC).Ground Floor
27410001116Providing and Fixing PVC LOW LEVEL CYSTERN conforming to IS 2556 : Part 3- 2004 SIZE 415X130X305mm.Make: Hindware SUPERB (CAT NO-50 8829)/Parryware SLIMLINE ECONOMY (E-8090).White Vitreous china 10 litre (full flush) capacity manually controlled low level flushing cistern with all fittings and fixtures.Ground Floor
27510001122Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm.Ground Floor
27610001124Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve.Ground Floor
27710001126Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve.Ground Floor
27810001128Providing and fixing of 50mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 50 mm dia. CPVC Full Way Valve / Ball Valve.Ground Floor
27910001132Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock.Ground Floor
28010001136Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock.Ground Floor
28110001146Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet.Ground Floor
28210001148Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder.Ground Floor
28310001150Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self.Ground Floor
28410001152Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail.Ground Floor
28510001154Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange.Ground Floor
28610001158Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification.(AR-2013,SL. NO.-3.4.26). Make: Mirror Glass (SAINT GOBIN/AIS(ASAHI)). 600mm x450mm Bevelled Edge Mirror (Heavy quality).Ground Floor
28710001160Providing & Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing cpvc tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification .(MAKE:- SUPREME/SINTEX /ORIPLAST BRANDS) Triple Layer Cylindrical Vertical water storage tanks.Ground Floor
28810001162Extra over (item No 3.1.8 as per A.R 2013) for hoisting Rotational moulded polyethylene cylindrical vertical water storage tanks of the following size for every additional height of 5 metres or part there of installation on roof as per the requirement and site condition.Ground Floor
28910001164Providing and fixing under counter wash basin with hole for pillar taps including cutting holes on slab, fixing accessories and making good the damages etc. all complete with fixing of 15mm dia. CP pillar cock, PVC waste pipe, CP waste as per specification. Vitreous china flat back wash basin size 485x370x205 mm. Make: JAQUAR (For basin-CNS-WHT-701, For Pillar cock-CON-021, for 32mm full/ half thread CP waste-ALD-705/709). Vitreous china Under Counter wash basin 485x370x205mm.Ground Floor
29010001209Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish.Ground Floor
29110001432Fixing Chromium Plated CRUZ soap dispenser KOHLER make Code-10712D-CP with holder complete with Chromium Plated brass brackets fixed to P.V.C plugs with Chromium Plated brass screws as per specification.Ground Floor
29210001458\\"Fixing standard size CP Complementary SQ Toilet paper holder KOHLER Make W/O COV Code-25070IN-CP fixed to woden plugs with Chromium Plated brass screws complete with all fittings as per specification.Ground Floor
293a) APPROVED MAKE /BRAND FOR CEMENT : ULTRATECH, NUVOCO, ACC, JSW (PSC),RAMCO(PSC),DALMIA(PSC),SAGAR(PSC),JK SUPER(PSC),JINDAL PANTHER(PSC)
294APPROVED MAKE / BRANDS ARE TO BE UTILISED STRICTLY DURING EXECUTION OF ABOVE RELATED ITEMS OF WORK Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58444679
AUTHORITY Government Departments
TENDER VALUE 25.97 Crore
LAST DATE 27-11-2026
Authority
Authority Name Orissa State Police Housing And Welfare Corporation Limited
Work Description Tender for Construction Of Development Of Ro-Pax Jetty & Allied Infrastructures At Musadiha, Dist-Jagatsinghpur.
Basic Detail
Tender No 19/OPHWC/2026-27
Bidding Type Tender
Location
City Khordha
State Odisha
Key Dates
Publish Date 07 Nov 2026
Submission Date 27 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 25.97 Crore
Tender Fee 11800
EMD 25.97 Lakhs
Exemption Available
Document List
1787051c-b86f-4429-9a98-be61e03f874e.html
BOQ_618123.xls
CORRIGENDUM.pdf
DTCN3.pdf
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
html

1787051c-b86f-4429-9a98-be61e03f874e.html

xls

BOQ_618123.xls

pdf

CORRIGENDUM.pdf

pdf

DTCN3.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender