Tender For Sinking Of 15 (Fifteen) Nos. 125Mm X 100Mm Dia Tube-Well With Platform Through Dth Drilling Rig Within Nuapada Nac.
Tender Value
18.13 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
3 days left
EMD
18140
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nuapada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Sinking Of 15 (Fifteen) Nos. 125Mm X 100Mm Dia Tube-Well With Platform Through Dth Drilling Rig Within Nuapada Nac.
BOQ
| Sl. No. | Item Description |
| 1 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/ 200 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 125 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). |
| 2 | Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. |
| 3 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 4 | Cost of 125mm dia ASTM Sch-80 Pipe |
| 5 | Supplying all materials, labour, tools and plant and withdrawing casing pipes from the unsuccessful bore and depositing in the departmental store in good condition. |
| 6 | Supplying all materials , labour and T&P etc and construciton of Tubewell Platform with 100 mm thick sand filling in foundation , lean cement concrete (1:3:6) of 150mm thick well burnt clamp burnt brick masonry in cement mortar (1:3) of 250mm thick wall in foundation and plinth ,12mm thick cement plaster (1:3) inside and outside 100mm thick cover slab in M-20 C.C (1:1½:3) ,50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering , earthwork in al kinds of soil and refilling etc. along with soak pit as per specificaiton and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. |
| 7 | Supply of ISI Marked Deep Well hand pump standard (SWDP) confirming to IS : 15500 (Pt.-2)/ 2004 complete with accessories and along with 8 nos. of riser pipes of 32 mm nominal bore hot dipped galvanised, screwed and socket made of swamless or machined from solid bar socket fitted at one end and thread protector at the other end and with 08 nos. of 12mm dia. Connecting rod made of bright bar electro galvanised , fitted with coupler and fitted with stand assemble recommended for rise in borewells having 100mm and 125mm N.B Min casing pipe including cost of all materials , taxes etc. all complete as per specification and direction of Engineer-in-charge. |
| 8 | Supplying all labour, tools and plant and fitting and fixing India M-II Deep Well Hand Pump with Cast Iron Cylinder, 12mm/16mm dia Bright Steel connecting rod, 32mm dia G.I Pipe of required lengths with supply of extra sockets of approved make, all complete temporarily as as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender