Tender For Restoration To Kimbhripal Breach On Brahamani Left Of Udayapur Oae
Tender Value
5.07 Crore
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
5.07 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jajapur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration To Kimbhripal Breach On Brahamani Left Of Udayapur Oae
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of temporary breach closing work including removing the sand, bullah and all other debris loading into and transpiration by mechanical means within initial lead of 1 Km, stacking it in specified place etc. complete as per direction of Engineer-in-Charge. |
| 2 | Clearing & grubbing shrub, jungles including uprooting stumps of trees and trees below 1.0 m. girth and thick bushes including bamboo clamps based on pre-measurement disposing the debris away from the work site with all leads, lifts and delifts with cost of all labour, hiring and running charges of all machineries, cess etc. complete as per direction of Engineer-in-Charge. |
| 3 | Excavation of foundation and plinth with all cost of labour and all other incidental charges and back filling the excavated materials wherever required as per direction of the Engineer-in-Charge. |
| 4 | Filling foundation and plinth with sand by mechanical/manual means and laying in layers duly compacted, watering including cost, T & P, carriage, royalty, EMF, DMF, Dist. additional charges with all leads, lifts, delifts, cess etc all complete as per drawing and specification and as per the direction of Engineer-in-Charge. |
| 5 | Rigid & smooth centering, shuttering for CC works including false works and dismantling them after casting including proper curing with cost, carriage, royalty with EMF, DMF, Dist. additional charges, cess etc. all complete as per specification and direction of Engineer-in-Charge. |
| 6 | Providing & laying cement concrete conforming to M-15 grade in approved surface using 20 mm size and down graded black hard granite (crusher broken) chips and sharp sand of approved grading from approved quarry for CC work conforming to specification, mixing by concrete mixture including hoisting and laying concrete in position, compacting with concrete vibrator with all leads, lifts, delifts for mix concrete, royalty of all materials, EMF, DMF, Dist. additional charges, cess including dewatering, curing for specified days by suitable means with supervision charges including mobilization and demobilization with cost of construction and dismantling of gangway and scaffolding, chute with all materials, construction of coffer dam / approach road, diversion road, site illumination, hire and running charges of machineries, dewatering by suitable means required for the work as per approved drawing and specification complete with all cost as directed by Engineer-in-Charge. |
| 7 | Providing & laying cement concrete conforming to M-20 grade in approved surface using 20 mm size and down graded black hard granite (crusher broken) chips and sharp sand of approved grading from approved quarry for CC work conforming to specification, mixing by concrete mixture including hoisting and laying concrete in position, compacting with concrete vibrator with all leads, lifts, delifts for mix concrete, royalty of all materials, EMF, DMF, Dist. additional charges, cess including dewatering, curing for specified days by suitable means with supervision charges including mobilization and demobilization with cost of construction and dismantling of gangway and scaffolding, chute with all materials, construction of coffer dam / approach road, diversion road, site illumination, hire and running charges of machineries, dewatering by suitable means required for the work as per approved drawing and specification complete with all cost as directed by Engineer-in-Charge. |
| 8 | Supplying, straightening, cutting, bending, binding and tying the grills using uncoated HYSD bars cutting, bending of designed diameters and placing in position for fabrication and fixing the reinforcement grills including laps, ties, providing chairs and welding whenever necessary with all leads, lifts and deliftswith all labour, cess, EMF, DMF, Dist. additional charges, complete including cost, conveyance of steel and binding wires complete and as per the direction of Engineer-in-Charge. |
| 9 | Installation of Gabion Boxes/Mattress (Mesh Type 6 x 8, thickness - 0.3m) made out of hexagonal woven wire mesh type zinc with pvc coated gabion boxes of different size such as(3m x 2m x 0.3m; 4m x 2m x 0.3m; 5m x 2m x 0.3m; and 6m x 2m x 0.3m) and smaller sizes, as necessary, etc. as per requirement at site filled with hard granite stones of nominal size between 15 Cm to 30Cm, compacting the stones inside gabion boxes with minimum voids and tying, stitching with lacing wire and heavily galvanized steel rings of 3mm dia having tensile strength of 170kg/mm2 with a spacing of rings @200mm c/c and placing in position with help of cranes and by other mechanical means including at all heights of banks and slopes with required quality control testing charges with cost of materials, royalty with EMF, DMF, Dist. additional charges, conveyance, machineries & Labour Cess etc. complete as per specification and direction of the Engineer-In-Charge. |
| 10 | Earth work filling in any approved type of soil from approved borrow area excavated by manually and carriage by mechanical means within 5 Km lead, lifts and delifts including loading into the transportation vehicles and unloading from transported vehicles and depositing the same on properly prepared and scientifically approved surface including rough dressing and breaking the clods to maximum 5cm. to 7cm., laying in layers not exceeding 22.50cm including cost, carriage, royalty charges with labour cess as per approved drawing, specification and direction of the Engineer-in-Charge. |
| 11 | Construction of granular sub-base by providing and laying, spreading and compacting stone aggregates to 225 mm thickness with IRC grade - III materials as per table-404-I to WBM specification including spreading in uniform layers with moter grader on prepared surface mixing by mix place method with rotavater , rolling with VRR in stages to proper grade and camber , applying and brooming using stone screened dust as binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density at OMC as per clause 404 of MoSRT & H specifications for road & Bridge works (4th Revision) with all leads, lifts and delifts including cost, conveyance, royalty, EMF, DMF, Dist. additional charges, cess etc. including labours and hire charges of T&P materials required for the work, hire and running charges of machineries etc. complete as per specification and direction of the Engineer-in-Charge. |
| 12 | Supplying and spreading 20 mm down graded chips satisfying filter criteria in horizontal filter zones and filter blankets to proper thickness including surface dressing within an initial lead, royalty with EMF, DMF, Dist. additional charges, cess complete as per direction of the Engineer-in-Charge. |
| 13 | Quarrying, Collecting, supplying blasted hard granite stone boulder of 15 cm to 30 Cm size from the approved quarry with free from weather skin surface & other deleterious materials and providing of Rough Stone Dry Packing in apron & revetments to required profile in all heights & depths including filling the interstices with small stones, wedging and hammering with hammer, fixing wave breakers etc, all cost, conveyance, labour, T & P required for the work, royalty with EMF, DMF, Dist. additional charges, cess, hire and running charges of machineries, all leads, lifts, delifts handling and re-handling charges, all incidental charges and all quality control testing charges as required for the work, haul roads etc. all complete as per the specification and direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender