Tender For annual repair & maintenance of Water Supply Scheme Under Jsv Sub Division Sullah In Tehsil Palampur Distt. Kangra (Hp) (Sh: - Repair Of 1.50 Hp To 20.. Hp Submersible Pump Set Installed At Village Punner Near School, Punner Near Society, D
Tender Value
2.04 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
6 days left
EMD
4086
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Water Supply Scheme Under Jsv Sub Division Sullah In Tehsil Palampur Distt. Kangra (Hp) (Sh: - Repair Of 1.50 Hp To 20.. Hp Submersible Pump Set Installed At Village Punner Near School, Punner Near Society, Dehan Near Chanderveer House, Mansimble Near Petrol Pump And Starter Panel At Village Kanal Patt, Punner Near Society, Punner Near Raj Kapoor House, Nanoun Near Samudayik Bhawan, Sullah Near Verma House, Dehan Near Gsss Dehan Near Chanderveer House And Bhawarna Near Pwd Je Office)
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding of 1.50 to 2.00 HP submersible Pump Set Rewinding of 1.50 to 2.00 HP submersible motor including insulator taping working Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 2 | Welding turning & stateling of rotor of motor Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 3 | Providing and fixing of gun metal bush to motor Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 4 | Providing and fixing coupling with motor and pump Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 5 | Providing and fixing impeller to single phase pump Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 6 | Providing and fixing diffuser to single phase pump Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 7 | Providing and fixing thrust plate of motor complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 8 | Providing and fixing Segment of thrust plate complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 9 | Providing and fixing balance plate of pump complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 10 | Providing and fixing of pump shaft complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 11 | Providing and fixing of water proof cable 3 core, 2.5 mm as per IS 674-Part-II-1964 suitable for above pump set from starter to pump set subject to the approval of HPSEB authority as per the satisfaction of Engineer in charge. |
| 12 | Providing and Fixing sand gaurd of pump complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 13 | Providing and fixing of gun metal top bush of pump Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 14 | Extraction of motor from bore well and refixing the same complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 15 | Carriage of motor pump from pump house to workshop and back to pump house complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 16 | Repair of 1.50 to 2.00 HP Automatic Starter Panel (7 Nos.) Providing and fixing voltmeter 0-300 volt for automission starter panel . Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 17 | Providing and fixing contact set LCID12 for1.50HP Automission starter panel . Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 18 | Providing and fixing timer watch . Complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 19 | Providing and fixing running capaster72 mfg of starter . complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 20 | Providing and fixing starting capaster 200-250 mfg of starter . complete in all respect as per direction of Engineer in Charge with in all leads and lifts |
| 21 | Providing and fixing connection plate for starter complete in all respect as per direction of Engineer in charge with in all lead and lifts |
| 22 | Providing and fixing 16 ampare on-off switch for starter complete in all respect as per direction of Engineer in charge with in all lead and lifts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender