Tender For Operation And Maintenance Of The Cwss To 674 Habs In Trichy District (Package-37 B) Including Repair, Rectification Works And Supply Of Chemicals For The Period From 01.01.2027 To 31.03.2029.
Tender Value
8.67 Crore
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
6.50 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Operation And Maintenance Of The Cwss To 674 Habs In Trichy District (Package-37 B) Including Repair, Rectification Works And Supply Of Chemicals For The Period From 01.01.2027 To 31.03.2029.
BOQ
| Sl. No. | Item Description |
| 1 | Operation and Mainteance of CWSS to 674 habitations in Manaparai, Marungapuri unions and Ponnampatti TP in Trichy District |
| 2 | Total Basic Value |
| 3 | GST @ 18% |
| 4 | For the Year 2026 - 2027. (From 01.01.2027 to 31.03.2027) |
| 5 | For Operation and Maintenance of Electro-mechanical equipments, components, pipelines valves and appurtenances, water retaining structuress including protection of all scheme components from damages/theft undertaking legal actions for such untoward incidents, preventive maintenance, disinfection and deliverance of water as per standards adopted time to time and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures, acts and rules in force and as directected by TWAD Board Officers. Excluding cost towards attending leak, burst, repairs and replacement works of electro-mechanical equipments/ components, consumables for disinfection of water and cleaning of all water retaining structure. |
| 6 | Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc. complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I) |
| 7 | For Minor Leak |
| 8 | 63mm PVC 4 KSC |
| 9 | 75mm PVC 4 KSC |
| 10 | 90mm PVC 4 KSC |
| 11 | 110mm PVC 4 KSC |
| 12 | 140mm PVC 4 KSC |
| 13 | 50mm PVC 6 KSC |
| 14 | 63mm PVC 6 KSC |
| 15 | For Collar Leak |
| 16 | 150mm AC |
| 17 | 200mm AC |
| 18 | 250mm AC |
| 19 | 300mm AC |
| 20 | 450mm PSC |
| 21 | 600mm PSC |
| 22 | 700mm PSC |
| 23 | For Minor Leak/ Circumfrential Crack |
| 24 | 150mm AC |
| 25 | 200mm AC |
| 26 | 250mm AC |
| 27 | 300mm AC |
| 28 | 450mm PSC |
| 29 | 600mm PSC |
| 30 | 700mm PSC |
| 31 | For Major Leak/ Burst |
| 32 | 150mm AC |
| 33 | 200mm AC |
| 34 | 250mm AC |
| 35 | 300mm AC |
| 36 | 450mm PSC |
| 37 | 600mm PSC |
| 38 | 700mm PSC |
| 39 | Excluding Supply of MS Pipe in Above GL |
| 40 | 450mm MS |
| 41 | 600mm MS |
| 42 | 700mm MS |
| 43 | Excluding Supply of MS Pipe in Below GL |
| 44 | 450mm MS |
| 45 | 600mm MS |
| 46 | 700mm MS |
| 47 | Road restoration related works after attending leak and burst works in NHAI/NH and heavy traffic area where road cutting is essential and as per standard specification and directed by TWAD board offcials |
| 48 | PCC 1:2:4 Concreting using 20mm metal for Road Restroration Works. |
| 49 | Filling with good gritty gravel from approved source for cutting portion to required thickness including cost and conveyance of all materials to work site and filling charges etc.., complete. As per MORTH 200, 300. |
| 50 | GI pipe replacement works in culvert and OHT inlet in corroded places G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 |
| 51 | Replacement of 125 mm GI pipe damaged connecting main |
| 52 | Replacement of 100 mm GI pipe damaged connecting main |
| 53 | Replacement of 80 mm GI pipe damaged connecting main |
| 54 | Replacement of 65 mm GI pipe damaged connecting main |
| 55 | Replacement of 50 mm GI pipe damaged connecting main |
| 56 | Cutting and Threading of GI pipes |
| 57 | Cutting of 125 mm GI Pipes |
| 58 | Threading of 125 mm GI pipes |
| 59 | Cutting of 100 mm GI Pipes |
| 60 | Threading of 100 mm GI pipes |
| 61 | Cutting of 80 mm GI Pipes |
| 62 | Threading of 80 mm GI pipes |
| 63 | Cutting of 65 mm GI Pipes |
| 64 | Threading of 65 mm GI pipes |
| 65 | Cutting of 50 mm GI Pipes |
| 66 | Threading of 50 mm GI pipes |
| 67 | Replacement of Underground Utilities (GI Pipe) damaged during earthwork excavations for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of GI pipes, coupler, Union, jointing materials and required specials, cutting, threading, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by the TWAD board officers. |
| 68 | 50mm Dia GI Pipe |
| 69 | 65mm Dia GI Pipe |
| 70 | 80mm Dia GI Pipe |
| 71 | 100mm Dia GI Pipe |
| 72 | 125mm Dia GI Pipe |
| 73 | Replacement of Underground Utilities (PVC Pipe) damaged during earthwork excavation for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe,including supply and delivery of PVC pipes, couplers, jointing materials and required specials, cutting, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by theTWAD board officers. |
| 74 | 63mm Dia PVC pipe (4KSC) |
| 75 | 75mm Dia PVC pipe (4KSC) |
| 76 | 90mm Dia PVC pipe (4KSC) |
| 77 | 110mm Dia PVC pipe (4KSC) |
| 78 | 140mm Dia PVC pipe (4KSC) |
| 79 | Supply and Delivery of various sizes of MS specials without inside lining and outside coating but with anti rust painting as per IS 14589 -1999. |
| 80 | MS Pipe for 10 m length |
| 81 | Welding of MS pipe for Replacement of Corroded Pipe |
| 82 | 450 MS pipe welding |
| 83 | 600 MS pipe Welding |
| 84 | 700 MS pipe welding |
| 85 | Earthwork excavation for attenting MS welding portion and similar leak works |
| 86 | Refilling for excavated earth in MS welding portion and similar leak works |
| 87 | Dewatering of MS pipe for attending leak in the pipe replacement works |
| 88 | Repair works in pumping station in the Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers |
| 89 | Repair work of Pumpset |
| 90 | 2 HP - Submersible Pumpset |
| 91 | 7.5 HP - Submersible Pumpset |
| 92 | 20 HP - Submersible Pumpset |
| 93 | 1 HP - Monoblock Pumpset |
| 94 | 2 HP - Monoblock Pumpset |
| 95 | 3 HP - Monoblock Pumpset |
| 96 | 5 HP - Monoblock Pumpset |
| 97 | 7.5 HP - Monoblock Pumpset |
| 98 | 10 HP - Monoblock Pumpset |
| 99 | 12.5 HP - Monoblock Pumpset |
| 100 | 15 HP - Monoblock Pumpset |
| 101 | Repair Work of Motor |
| 102 | 150 HP - VT Pumpset |
| 103 | 150 HP - HSC Pumpset |
| 104 | 120 HP - HSC Pumpset |
| 105 | 90 HP - HSC Pumpset |
| 106 | 100 HP - HSC Pumpset |
| 107 | 75 HP - HSC Pumpset |
| 108 | 50 HP - HSC Pumpset |
| 109 | 25 HP - HSC Pumpset |
| 110 | Repair work of Pump |
| 111 | 150 HP - VT Pumpset |
| 112 | 150 HP - HSC Pumpset |
| 113 | 120 HP - HSC Pumpset |
| 114 | 90 HP - HSC Pumpset |
| 115 | 100 HP - HSC Pumpset |
| 116 | 75 HP - HSC Pumpset |
| 117 | 50 HP - HSC Pumpset |
| 118 | 25 HP - HSC Pumpset |
| 119 | Repair work of Starter |
| 120 | 150 HP - VT Pumpset |
| 121 | 150 HP - HSC Pumpset |
| 122 | 120 HP - HSC Pumpset |
| 123 | 90 HP - HSC Pumpset |
| 124 | 100 HP - HSC Pumpset |
| 125 | 75 HP - HSC Pumpset |
| 126 | 50 HP - HSC Pumpset |
| 127 | 25 HP - HSC Pumpset |
| 128 | 20 HP - Submersible Pumpset |
| 129 | 7.5 HP - Submersible Pumpset |
| 130 | 1 HP - Monoblock Pumpset |
| 131 | 2 HP - Submersible Pumpset |
| 132 | 3 HP - Monoblock Pumpset |
| 133 | 5 HP - Monoblock Pumpset |
| 134 | 7.5 HP - Monoblock Pumpset |
| 135 | 10 HP - Monoblock Pumpset |
| 136 | 12.5 HP - Monoblock Pumpset |
| 137 | 15 HP - Monoblock Pumpset |
| 138 | Charges for Repair and Reconditioning of Sluice valve in pumproom and pipeline including cost of check nut and labour charges etc., |
| 139 | 300mm Sluice Valve |
| 140 | 250mm Sluice Valve |
| 141 | 200mm Sluice Valve |
| 142 | 150mm Sluice Valve |
| 143 | 100mm Sluice Valve |
| 144 | Replacement of non functioning unserviceble Gun metal Valve without affecting existing alignment by contractor tools excluding cost of valve but including required length of GI nipple, coupling etc., complete |
| 145 | 50 mm Gun metal valve |
| 146 | 65 mm Gun Metal valve |
| 147 | 80 mm Gun Metal valve |
| 148 | 100 mm Gun Metal valve |
| 149 | Supply and delivery of Gun Metal Valve |
| 150 | 50 mm Gun metal valve |
| 151 | 65 mm Gun Metal valve |
| 152 | 80 mm Gun Metal valve |
| 153 | 100 mm Gun Metal valve |
| 154 | Repair and Reconditioning of the double Air valve / Single Chamber Air Release valve including the cost of Air Valve Ball, Rubber washer and required Bolt & Nuts, etc., complete |
| 155 | 150mm Air Valve |
| 156 | 100mm Air Valve |
| 157 | 80 mm Air valve |
| 158 | 50 mm Air Valve |
| 159 | 25 mm Air Valve |
| 160 | Supply and delivery of the following Electrical works:consumable items at the site of work carry out the general maintenance works |
| 161 | Digital Voltmeter 3 phase |
| 162 | Digital Ammeter 3 phase |
| 163 | LED Outdoor Fittings (LIGHT EMITTING DIODE) Higher end - 30 W LED street light fittings |
| 164 | 4 Feet LED Fitting - Lower end - 15W LED Bulb |
| 165 | Replacement of the C.I.DOUBLE AIR VALVE AS PER ISI 14845/2000 AND WITH 5 YEARS WARRANTY |
| 166 | 150mm Air Valve |
| 167 | 100mm Air Valve |
| 168 | Replacement of the CI SINGLE AIR VALVE AS PER ISI 14845/2000 AND WITH 5 YEARS WARRANTY |
| 169 | 80 mm Air valve |
| 170 | 50 mm Air Valve |
| 171 | 40 mm Air Valve |
| 172 | 25 mm Air Valve |
| 173 | Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking |
| 174 | Supply and Delivery of L.T. Cables 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING |
| 175 | 3C 4 sq.mm |
| 176 | 3C 6 sq.mm |
| 177 | 3C 10sq.mm |
| 178 | 3C 16sq.mm |
| 179 | 3C 25sq.mm |
| 180 | 3C 50sq.mm |
| 181 | Supply and Delivery of PVC Insulated and Sheathed 3 Core Flat copper cable conforming to IS 694 / 1990 |
| 182 | 1.5 sq.mm |
| 183 | 2.5 sq.mm |
| 184 | 4.0 sq.mm |
| 185 | 6.0 sq.mm |
| 186 | 10.0 sq.mm |
| 187 | Overload Relays: Directly operated Bimetallic Thermal overload relay which operates in case of overload and also in case of under voltage with manual and auto reset mode. |
| 188 | Upto 5 A |
| 189 | 5 A to 10 A |
| 190 | 10 A to 20 A |
| 191 | 20 A to 30 A |
| 192 | 30 A to 50 A |
| 193 | 50 A to 75 A |
| 194 | 75 A to 110 A |
| 195 | 110 A to 150 A |
| 196 | 150 A to 200 A |
| 197 | 200 A to 300 A |
| 198 | Electric Motor protection device against single phasing. The device should protect the motor against single phasing, reverse phasing and unbalance supply. The device should be suitable for any auxillary device and have provisions for mounting in panel boards. Operate without need of any auxiliary supply. (Single Phasing Preventer) |
| 199 | Supply and Delivery of Porcelien Fuse Units |
| 200 | 32 Amps Porcelain Fuse Unit (500V) |
| 201 | 63 Amps Porcelain Fuse Unit (500V) |
| 202 | 100 Amps Porcelain Fuse Unit (500V) |
| 203 | Replacement for Supply and Delivery of Moulded Case Circuit Breaker For FCMA Soft Starter and other starters in TS, BS and GS |
| 204 | 400 AMPS |
| 205 | 315 AMPS |
| 206 | 300 AMPS |
| 207 | 200 AMPS |
| 208 | 250 AMPS |
| 209 | 160 AMPS |
| 210 | 125 AMPS |
| 211 | 100 AMPS |
| 212 | 63 AMPS |
| 213 | Supply and Delivery of 20 Amps Copper Fuse wire |
| 214 | Supply and Delivery of Grease for Motor and Pumpsets |
| 215 | Supply and Delivery of MCB Isolator |
| 216 | 32 A FP |
| 217 | 63 A FP |
| 218 | 100 A FP |
| 219 | Replacent of CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING AND WITH 5 YEARS WARRANTY - For Scour valve |
| 220 | 400mm |
| 221 | Supply and Delivery of 150mm dia Pressure Gauge and Vaccum guage including all accessories as per specification (For Suction and Delivery to be mounted on wall on Teak Wood Board) |
| 222 | Supply and Delivery of Change Over Switch |
| 223 | 32 Amps Three Phase 500V 4 Pole |
| 224 | 63 Amps Three Phase 500V 4 Pole |
| 225 | 100 Amps Three Phase 500V 4 Pole |
| 226 | 400 Amps Three Phase 4 Pole Change Over Switch |
| 227 | Electro magnetic contactors of suitable capacity in AC Three Phase rating, conforming to IS/ IEC 60947-4-1. |
| 228 | 12Amps |
| 229 | 18Amps |
| 230 | 22Amps |
| 231 | 25Amps |
| 232 | 32Amps |
| 233 | 40Amps |
| 234 | 80Amps |
| 235 | 110Amps |
| 236 | 185Amps |
| 237 | 225Amps |
| 238 | Supply and delivery of Coolant oil Suitable for 11 KV / 433 V Transformer and starter |
| 239 | Supply and Delivery of Breather Unit |
| 240 | Supply and Delivery of Silica Gel for filling the Breather unit |
| 241 | Supply and Delivery of Drop Out Fuse with 25 Amps Fuse wire with Porcelain Bushing Insulators for 11 KV Transformer |
| 242 | Supply and Delivery of Cork Gaskets and LT Brass Rods |
| 243 | 6mm Cork Gaskets |
| 244 | 8mm Cork Gaskets |
| 245 | LT Brass Rod |
| 246 | Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in six months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries, materials, labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers |
| 247 | Kuppachipatty Booster Sump - 1300000 Ltr |
| 248 | Chinnarediyapatty Booster Sump - 1300000 Ltr |
| 249 | Malayadipatty Booster Sump - 1300000 Ltr |
| 250 | Pannakombu Booster Sump - 1300000 Ltr |
| 251 | Puthanatham Booster - 400000 Ltr |
| 252 | Kondayanpatti Booster Sump - 400000 Ltr |
| 253 | Athupatti Booster Sump - 60000 Ltr |
| 254 | Madampatti Group Sump - 100000 Ltr |
| 255 | Kurumbapatti Group sump - 100000 Ltr |
| 256 | Chettiapatti Group sump - 10000 Ltr |
| 257 | Kalpalayathanpatti Group sump - 100000 Ltr |
| 258 | N.Pudur Group sump - 10000 Ltr |
| 259 | Manakundram Group sump - 60000 Ltr |
| 260 | Karaikulam Group sump - 150000 Ltr |
| 261 | Kadapitchampatti Group sump - 60000 Ltr |
| 262 | Servaikaranpatti Group sump - 10000 Ltr |
| 263 | Maniyankurichi Group sump - 30000 Ltr |
| 264 | Karumalai Group sump - 100000 Ltr |
| 265 | Pothapatti Group sump - 10000 Ltr |
| 266 | Azhaguchitirapatti Group sump - 10000 Ltr |
| 267 | Endapuli Group sump - 10000 Ltr |
| 268 | Kallakampatti Group sump - 100000 Ltr |
| 269 | Karaipatti Group sump - 30000 Ltr |
| 270 | Othakadai Group sump - 100000 Ltr |
| 271 | Chettiyapatti Group sump - 20000 Ltr |
| 272 | Venkatanaickanpatti Group sump - 30000 Ltr |
| 273 | Sadavelampatti Group sump - 60000 Ltr |
| 274 | M. Idayapatti Group sump - 100000 Ltr |
| 275 | Thethur Group sump - 60000 Ltr |
| 276 | Rajaramkadai Group sump - 150000 Ltr |
| 277 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete. |
| 278 | 6m Dia Collector well |
| 279 | 4.50m Dia Infiltration well |
| 280 | Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations. |
| 281 | For the Year 2027 - 2028. (From 01.04.2027 to 31.03.2028) |
| 282 | For Operation and Maintenance of Electro-mechanical equipments, components, pipelines valves and appurtenances, water retaining structuress including protection of all scheme components from damages/theft undertaking legal actions for such untoward incidents, preventive maintenance, disinfection and deliverance of water as per standards adopted time to time and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures, acts and rules in force and as directected by TWAD Board Officers. Excluding cost towards attending leak, burst, repairs and replacement works of electro-mechanical equipments/ components, consumables for disinfection of water and cleaning of all water retaining structure. |
| 283 | Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc. complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I) |
| 284 | For Minor Leak |
| 285 | 63mm PVC 4 KSC |
| 286 | 75mm PVC 4 KSC |
| 287 | 90mm PVC 4 KSC |
| 288 | 110mm PVC 4 KSC |
| 289 | 140mm PVC 4 KSC |
| 290 | 50mm PVC 6 KSC |
| 291 | 63mm PVC 6 KSC |
| 292 | For Collar Leak |
| 293 | 150mm AC |
| 294 | 200mm AC |
| 295 | 250mm AC |
| 296 | 300mm AC |
| 297 | 450mm PSC |
| 298 | 600mm PSC |
| 299 | 700mm PSC |
| 300 | For Minor Leak/ Circumfrential Crack |
| 301 | 150mm AC |
| 302 | 200mm AC |
| 303 | 250mm AC |
| 304 | 300mm AC |
| 305 | 450mm PSC |
| 306 | 600mm PSC |
| 307 | 700mm PSC |
| 308 | For Major Leak/ Burst |
| 309 | 150mm AC |
| 310 | 200mm AC |
| 311 | 250mm AC |
| 312 | 300mm AC |
| 313 | 450mm PSC |
| 314 | 600mm PSC |
| 315 | 700mm PSC |
| 316 | Excluding Supply of MS Pipe in Above GL |
| 317 | 450mm MS |
| 318 | 600mm MS |
| 319 | 700mm MS |
| 320 | Excluding Supply of MS Pipe in Below GL |
| 321 | 450mm MS |
| 322 | 600mm MS |
| 323 | 700mm MS |
| 324 | Road restoration related works after attending leak and burst works in NHAI/NH and heavy traffic area where road cutting is essential and as per standard specification and directed by TWAD board offcials |
| 325 | PCC 1:2:4 Concreting using 20mm metal for Road Restroration Works. |
| 326 | Filling with good gritty gravel from approved source for cutting portion to required thickness including cost and conveyance of all materials to work site and filling charges etc.., complete. As per MORTH 200, 300. |
| 327 | GI pipe replacement works in culvert and OHT inlet in corroded places G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 |
| 328 | Replacement of 125 mm GI pipe damaged connecting main |
| 329 | Replacement of 100 mm GI pipe damaged connecting main |
| 330 | Replacement of 80 mm GI pipe damaged connecting main |
| 331 | Replacement of 65 mm GI pipe damaged connecting main |
| 332 | Replacement of 50 mm GI pipe damaged connecting main |
| 333 | Cutting and Threading of GI pipes |
| 334 | Cutting of 125 mm GI Pipes |
| 335 | Threading of 125 mm GI pipes |
| 336 | Cutting of 100 mm GI Pipes |
| 337 | Threading of 100 mm GI pipes |
| 338 | Cutting of 80 mm GI Pipes |
| 339 | Threading of 80 mm GI pipes |
| 340 | Cutting of 65 mm GI Pipes |
| 341 | Threading of 65 mm GI pipes |
| 342 | Cutting of 50 mm GI Pipes |
| 343 | Threading of 50 mm GI pipes |
| 344 | Replacement of Underground Utilities (GI Pipe) damaged during earthwork excavations for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of GI pipes, coupler, Union, jointing materials and required specials, cutting, threading, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by the TWAD board officers. |
| 345 | 50mm Dia GI Pipe |
| 346 | 65mm Dia GI Pipe |
| 347 | 80mm Dia GI Pipe |
| 348 | 100mm Dia GI Pipe |
| 349 | 125mm Dia GI Pipe |
| 350 | Replacement of Underground Utilities (PVC Pipe) damaged during earthwork excavation for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe,including supply and delivery of PVC pipes, couplers, jointing materials and required specials, cutting, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by theTWAD board officers. |
| 351 | 63mm Dia PVC pipe (4KSC) |
| 352 | 75mm Dia PVC pipe (4KSC) |
| 353 | 90mm Dia PVC pipe (4KSC) |
| 354 | 110mm Dia PVC pipe (4KSC) |
| 355 | 140mm Dia PVC pipe (4KSC) |
| 356 | Supply and Delivery of various sizes of MS specials without inside lining and outside coating but with anti rust painting as per IS 14589 -1999. |
| 357 | MS Pipe for 10 m length |
| 358 | Welding of MS pipe for Replacement of Corroded Pipe |
| 359 | 450 MS pipe welding |
| 360 | 600 MS pipe Welding |
| 361 | 700 MS pipe welding |
| 362 | Earthwork excavation for attenting MS welding portion and similar leak works |
| 363 | Refilling for excavated earth in MS welding portion and similar leak works |
| 364 | Dewatering of MS pipe for attending leak in the pipe replacement works |
| 365 | Repair works in pumping station in the Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers |
| 366 | Repair work of Pumpset |
| 367 | 2 HP - Submersible Pumpset |
| 368 | 7.5 HP - Submersible Pumpset |
| 369 | 20 HP - Submersible Pumpset |
| 370 | 1 HP - Monoblock Pumpset |
| 371 | 2 HP - Monoblock Pumpset |
| 372 | 3 HP - Monoblock Pumpset |
| 373 | 5 HP - Monoblock Pumpset |
| 374 | 7.5 HP - Monoblock Pumpset |
| 375 | 10 HP - Monoblock Pumpset |
| 376 | 12.5 HP - Monoblock Pumpset |
| 377 | 15 HP - Monoblock Pumpset |
| 378 | Repair Work of Motor |
| 379 | 150 HP - VT Pumpset |
| 380 | 150 HP - HSC Pumpset |
| 381 | 120 HP - HSC Pumpset |
| 382 | 90 HP - HSC Pumpset |
| 383 | 100 HP - HSC Pumpset |
| 384 | 75 HP - HSC Pumpset |
| 385 | 50 HP - HSC Pumpset |
| 386 | 25 HP - HSC Pumpset |
| 387 | Repair work of Pump |
| 388 | 150 HP - VT Pumpset |
| 389 | 150 HP - HSC Pumpset |
| 390 | 120 HP - HSC Pumpset |
| 391 | 90 HP - HSC Pumpset |
| 392 | 100 HP - HSC Pumpset |
| 393 | 75 HP - HSC Pumpset |
| 394 | 50 HP - HSC Pumpset |
| 395 | 25 HP - HSC Pumpset |
| 396 | Repair work of Starter |
| 397 | 150 HP - VT Pumpset |
| 398 | 150 HP - HSC Pumpset |
| 399 | 120 HP - HSC Pumpset |
| 400 | 90 HP - HSC Pumpset |
| 401 | 100 HP - HSC Pumpset |
| 402 | 75 HP - HSC Pumpset |
| 403 | 50 HP - HSC Pumpset |
| 404 | 25 HP - HSC Pumpset |
| 405 | 20 HP - Submersible Pumpset |
| 406 | 7.5 HP - Submersible Pumpset |
| 407 | 1 HP - Monoblock Pumpset |
| 408 | 2 HP - Submersible Pumpset |
| 409 | 3 HP - Monoblock Pumpset |
| 410 | 5 HP - Monoblock Pumpset |
| 411 | 7.5 HP - Monoblock Pumpset |
| 412 | 10 HP - Monoblock Pumpset |
| 413 | 12.5 HP - Monoblock Pumpset |
| 414 | 15 HP - Monoblock Pumpset |
| 415 | Charges for Repair and Reconditioning of Sluice valve in pumproom and pipeline including cost of check nut and labour charges etc., |
| 416 | 300mm Sluice Valve |
| 417 | 250mm Sluice Valve |
| 418 | 200mm Sluice Valve |
| 419 | 150mm Sluice Valve |
| 420 | 100mm Sluice Valve |
| 421 | Replacement of non functioning unserviceble Gun metal Valve without affecting existing alignment by contractor tools excluding cost of valve but including required length of GI nipple, coupling etc., complete |
| 422 | 50 mm Gun metal valve |
| 423 | 65 mm Gun Metal valve |
| 424 | 80 mm Gun Metal valve |
| 425 | 100 mm Gun Metal valve |
| 426 | Supply and delivery of Gun Metal Valve |
| 427 | 50 mm Gun metal valve |
| 428 | 65 mm Gun Metal valve |
| 429 | 80 mm Gun Metal valve |
| 430 | 100 mm Gun Metal valve |
| 431 | Repair and Reconditioning of the double Air valve / Single Chamber Air Release valve including the cost of Air Valve Ball, Rubber washer and required Bolt & Nuts, etc., complete |
| 432 | 150mm Air Valve |
| 433 | 100mm Air Valve |
| 434 | 80 mm Air valve |
| 435 | 50 mm Air Valve |
| 436 | 25 mm Air Valve |
| 437 | Supply and delivery of the following Electrical works:consumable items at the site of work carry out the general maintenance works |
| 438 | Digital Voltmeter 3 phase |
| 439 | Digital Ammeter 3 phase |
| 440 | LED Outdoor Fittings (LIGHT EMITTING DIODE) Higher end - 30 W LED street light fittings |
| 441 | 4 Feet LED Fitting - Lower end - 15W LED Bulb |
| 442 | Replacement of the C.I.DOUBLE AIR VALVE AS PER ISI 14845/2000 AND WITH 5 YEARS WARRANTY |
| 443 | 150mm Air Valve |
| 444 | 100mm Air Valve |
| 445 | Replacement of the CI SINGLE AIR VALVE AS PER ISI 14845/2000 AND WITH 5 YEARS WARRANTY |
| 446 | 80 mm Air valve |
| 447 | 50 mm Air Valve |
| 448 | 40 mm Air Valve |
| 449 | 25 mm Air Valve |
| 450 | Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking |
| 451 | Supply and Delivery of L.T. Cables 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING |
| 452 | 3C 4 sq.mm |
| 453 | 3C 6 sq.mm |
| 454 | 3C 10sq.mm |
| 455 | 3C 16sq.mm |
| 456 | 3C 25sq.mm |
| 457 | 3C 50sq.mm |
| 458 | Supply and Delivery of PVC Insulated and Sheathed 3 Core Flat copper cable conforming to IS 694 / 1990 |
| 459 | 1.5 sq.mm |
| 460 | 2.5 sq.mm |
| 461 | 4.0 sq.mm |
| 462 | 6.0 sq.mm |
| 463 | 10.0 sq.mm |
| 464 | Overload Relays: Directly operated Bimetallic Thermal overload relay which operates in case of overload and also in case of under voltage with manual and auto reset mode. |
| 465 | Upto 5 A |
| 466 | 5 A to 10 A |
| 467 | 10 A to 20 A |
| 468 | 20 A to 30 A |
| 469 | 30 A to 50 A |
| 470 | 50 A to 75 A |
| 471 | 75 A to 110 A |
| 472 | 110 A to 150 A |
| 473 | 150 A to 200 A |
| 474 | 200 A to 300 A |
| 475 | Electric Motor protection device against single phasing. The device should protect the motor against single phasing, reverse phasing and unbalance supply. The device should be suitable for any auxillary device and have provisions for mounting in panel boards. Operate without need of any auxiliary supply. (Single Phasing Preventer) |
| 476 | Supply and Delivery of Porcelien Fuse Units |
| 477 | 32 Amps Porcelain Fuse Unit (500V) |
| 478 | 63 Amps Porcelain Fuse Unit (500V) |
| 479 | 100 Amps Porcelain Fuse Unit (500V) |
| 480 | Replacement for Supply and Delivery of Moulded Case Circuit Breaker For FCMA Soft Starter and other starters in TS, BS and GS |
| 481 | 400 AMPS |
| 482 | 315 AMPS |
| 483 | 300 AMPS |
| 484 | 200 AMPS |
| 485 | 250 AMPS |
| 486 | 160 AMPS |
| 487 | 125 AMPS |
| 488 | 100 AMPS |
| 489 | 63 AMPS |
| 490 | Supply and Delivery of 20 Amps Copper Fuse wire |
| 491 | Supply and Delivery of Grease for Motor and Pumpsets |
| 492 | Supply and Delivery of MCB Isolator |
| 493 | 32 A FP |
| 494 | 63 A FP |
| 495 | 100 A FP |
| 496 | Replacent of CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING AND WITH 5 YEARS WARRANTY - For Scour valve |
| 497 | 400mm |
| 498 | Supply and Delivery of 150mm dia Pressure Gauge and Vaccum guage including all accessories as per specification (For Suction and Delivery to be mounted on wall on Teak Wood Board) |
| 499 | Supply and Delivery of Change Over Switch |
| 500 | 32 Amps Three Phase 500V 4 Pole |
| 501 | 63 Amps Three Phase 500V 4 Pole |
| 502 | 100 Amps Three Phase 500V 4 Pole |
| 503 | 400 Amps Three Phase 4 Pole Change Over Switch |
| 504 | Electro magnetic contactors of suitable capacity in AC Three Phase rating, conforming to IS/ IEC 60947-4-1. |
| 505 | 12Amps |
| 506 | 18Amps |
| 507 | 22Amps |
| 508 | 25Amps |
| 509 | 32Amps |
| 510 | 40Amps |
| 511 | 80Amps |
| 512 | 110Amps |
| 513 | 185Amps |
| 514 | 225Amps |
| 515 | Supply and delivery of Coolant oil Suitable for 11 KV / 433 V Transformer and starter |
| 516 | Supply and Delivery of Breather Unit |
| 517 | Supply and Delivery of Silica Gel for filling the Breather unit |
| 518 | Supply and Delivery of Drop Out Fuse with 25 Amps Fuse wire with Porcelain Bushing Insulators for 11 KV Transformer |
| 519 | Supply and Delivery of Cork Gaskets and LT Brass Rods |
| 520 | 6mm Cork Gaskets |
| 521 | 8mm Cork Gaskets |
| 522 | LT Brass Rod |
| 523 | Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in six months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries, materials, labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers |
| 524 | Kuppachipatty Booster Sump - 1300000 Ltr |
| 525 | Chinnarediyapatty Booster Sump - 1300000 Ltr |
| 526 | Malayadipatty Booster Sump - 1300000 Ltr |
| 527 | Pannakombu Booster Sump - 1300000 Ltr |
| 528 | Puthanatham Booster - 400000 Ltr |
| 529 | Kondayanpatti Booster Sump - 400000 Ltr |
| 530 | Athupatti Booster Sump - 60000 Ltr |
| 531 | Madampatti Group Sump - 100000 Ltr |
| 532 | Kurumbapatti Group sump - 100000 Ltr |
| 533 | Chettiapatti Group sump - 10000 Ltr |
| 534 | Kalpalayathanpatti Group sump - 100000 Ltr |
| 535 | N.Pudur Group sump - 10000 Ltr |
| 536 | Manakundram Group sump - 60000 Ltr |
| 537 | Karaikulam Group sump - 150000 Ltr |
| 538 | Kadapitchampatti Group sump - 60000 Ltr |
| 539 | Servaikaranpatti Group sump - 10000 Ltr |
| 540 | Maniyankurichi Group sump - 30000 Ltr |
| 541 | Karumalai Group sump - 100000 Ltr |
| 542 | Pothapatti Group sump - 10000 Ltr |
| 543 | Azhaguchitirapatti Group sump - 10000 Ltr |
| 544 | Endapuli Group sump - 10000 Ltr |
| 545 | Kallakampatti Group sump - 100000 Ltr |
| 546 | Karaipatti Group sump - 30000 Ltr |
| 547 | Othakadai Group sump - 100000 Ltr |
| 548 | Chettiyapatti Group sump - 20000 Ltr |
| 549 | Venkatanaickanpatti Group sump - 30000 Ltr |
| 550 | Sadavelampatti Group sump - 60000 Ltr |
| 551 | M. Idayapatti Group sump - 100000 Ltr |
| 552 | Thethur Group sump - 60000 Ltr |
| 553 | Rajaramkadai Group sump - 150000 Ltr |
| 554 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete. |
| 555 | 6m Dia Collector well |
| 556 | 4.50m Dia Infiltration well |
| 557 | Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations. |
| 558 | For the Year 2028 - 2029(From 01.04.2028 to 31.03.2029) |
| 559 | For Operation and Maintenance of Electro-mechanical equipments, components, pipelines valves and appurtenances, water retaining structuress including protection of all scheme components from damages/theft undertaking legal actions for such untoward incidents, preventive maintenance, disinfection and deliverance of water as per standards adopted time to time and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures, acts and rules in force and as directected by TWAD Board Officers. Excluding cost towards attending leak, burst, repairs and replacement works of electro-mechanical equipments/ components, consumables for disinfection of water and cleaning of all water retaining structure. |
| 560 | Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc. complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I) |
| 561 | For Minor Leak |
| 562 | 63mm PVC 4 KSC |
| 563 | 75mm PVC 4 KSC |
| 564 | 90mm PVC 4 KSC |
| 565 | 110mm PVC 4 KSC |
| 566 | 140mm PVC 4 KSC |
| 567 | 50mm PVC 6 KSC |
| 568 | 63mm PVC 6 KSC |
| 569 | For Collar Leak |
| 570 | 150mm AC |
| 571 | 200mm AC |
| 572 | 250mm AC |
| 573 | 300mm AC |
| 574 | 450mm PSC |
| 575 | 600mm PSC |
| 576 | 700mm PSC |
| 577 | For Minor Leak/ Circumfrential Crack |
| 578 | 150mm AC |
| 579 | 200mm AC |
| 580 | 250mm AC |
| 581 | 300mm AC |
| 582 | 450mm PSC |
| 583 | 600mm PSC |
| 584 | 700mm PSC |
| 585 | For Major Leak/ Burst |
| 586 | 150mm AC |
| 587 | 200mm AC |
| 588 | 250mm AC |
| 589 | 300mm AC |
| 590 | 450mm PSC |
| 591 | 600mm PSC |
| 592 | 700mm PSC |
| 593 | Excluding Supply of MS Pipe in Above GL |
| 594 | 450mm MS |
| 595 | 600mm MS |
| 596 | 700mm MS |
| 597 | Excluding Supply of MS Pipe in Below GL |
| 598 | 450mm MS |
| 599 | 600mm MS |
| 600 | 700mm MS |
| 601 | Road restoration related works after attending leak and burst works in NHAI/NH and heavy traffic area where road cutting is essential and as per standard specification and directed by TWAD board offcials |
| 602 | PCC 1:2:4 Concreting using 20mm metal for Road Restroration Works. |
| 603 | Filling with good gritty gravel from approved source for cutting portion to required thickness including cost and conveyance of all materials to work site and filling charges etc.., complete. As per MORTH 200, 300. |
| 604 | GI pipe replacement works in culvert and OHT inlet in corroded places G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 |
| 605 | Replacement of 125 mm GI pipe damaged connecting main |
| 606 | Replacement of 100 mm GI pipe damaged connecting main |
| 607 | Replacement of 80 mm GI pipe damaged connecting main |
| 608 | Replacement of 65 mm GI pipe damaged connecting main |
| 609 | Replacement of 50 mm GI pipe damaged connecting main |
| 610 | Cutting and Threading of GI pipes |
| 611 | Cutting of 125 mm GI Pipes |
| 612 | Threading of 125 mm GI pipes |
| 613 | Cutting of 100 mm GI Pipes |
| 614 | Threading of 100 mm GI pipes |
| 615 | Cutting of 80 mm GI Pipes |
| 616 | Threading of 80 mm GI pipes |
| 617 | Cutting of 65 mm GI Pipes |
| 618 | Threading of 65 mm GI pipes |
| 619 | Cutting of 50 mm GI Pipes |
| 620 | Threading of 50 mm GI pipes |
| 621 | Replacement of Underground Utilities (GI Pipe) damaged during earthwork excavations for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of GI pipes, coupler, Union, jointing materials and required specials, cutting, threading, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by the TWAD board officers. |
| 622 | 50mm Dia GI Pipe |
| 623 | 65mm Dia GI Pipe |
| 624 | 80mm Dia GI Pipe |
| 625 | 100mm Dia GI Pipe |
| 626 | 125mm Dia GI Pipe |
| 627 | Replacement of Underground Utilities (PVC Pipe) damaged during earthwork excavation for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe,including supply and delivery of PVC pipes, couplers, jointing materials and required specials, cutting, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by theTWAD board officers. |
| 628 | 63mm Dia PVC pipe (4KSC) |
| 629 | 75mm Dia PVC pipe (4KSC) |
| 630 | 90mm Dia PVC pipe (4KSC) |
| 631 | 110mm Dia PVC pipe (4KSC) |
| 632 | 140mm Dia PVC pipe (4KSC) |
| 633 | Supply and Delivery of various sizes of MS specials without inside lining and outside coating but with anti rust painting as per IS 14589 -1999. |
| 634 | MS Pipe for 10 m length |
| 635 | Welding of MS pipe for Replacement of Corroded Pipe |
| 636 | 450 MS pipe welding |
| 637 | 600 MS pipe Welding |
| 638 | 700 MS pipe welding |
| 639 | Earthwork excavation for attenting MS welding portion and similar leak works |
| 640 | Refilling for excavated earth in MS welding portion and similar leak works |
| 641 | Dewatering of MS pipe for attending leak in the pipe replacement works |
| 642 | Repair works in pumping station in the Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers |
| 643 | Repair work of Pumpset |
| 644 | 2 HP - Submersible Pumpset |
| 645 | 7.5 HP - Submersible Pumpset |
| 646 | 20 HP - Submersible Pumpset |
| 647 | 1 HP - Monoblock Pumpset |
| 648 | 2 HP - Monoblock Pumpset |
| 649 | 3 HP - Monoblock Pumpset |
| 650 | 5 HP - Monoblock Pumpset |
| 651 | 7.5 HP - Monoblock Pumpset |
| 652 | 10 HP - Monoblock Pumpset |
| 653 | 12.5 HP - Monoblock Pumpset |
| 654 | 15 HP - Monoblock Pumpset |
| 655 | Repair Work of Motor |
| 656 | 150 HP - VT Pumpset |
| 657 | 150 HP - HSC Pumpset |
| 658 | 120 HP - HSC Pumpset |
| 659 | 90 HP - HSC Pumpset |
| 660 | 100 HP - HSC Pumpset |
| 661 | 75 HP - HSC Pumpset |
| 662 | 50 HP - HSC Pumpset |
| 663 | 25 HP - HSC Pumpset |
| 664 | Repair work of Pump |
| 665 | 150 HP - VT Pumpset |
| 666 | 150 HP - HSC Pumpset |
| 667 | 120 HP - HSC Pumpset |
| 668 | 90 HP - HSC Pumpset |
| 669 | 100 HP - HSC Pumpset |
| 670 | 75 HP - HSC Pumpset |
| 671 | 50 HP - HSC Pumpset |
| 672 | 25 HP - HSC Pumpset |
| 673 | Repair work of Starter |
| 674 | 150 HP - VT Pumpset |
| 675 | 150 HP - HSC Pumpset |
| 676 | 120 HP - HSC Pumpset |
| 677 | 90 HP - HSC Pumpset |
| 678 | 100 HP - HSC Pumpset |
| 679 | 75 HP - HSC Pumpset |
| 680 | 50 HP - HSC Pumpset |
| 681 | 25 HP - HSC Pumpset |
| 682 | 20 HP - Submersible Pumpset |
| 683 | 7.5 HP - Submersible Pumpset |
| 684 | 1 HP - Monoblock Pumpset |
| 685 | 2 HP - Submersible Pumpset |
| 686 | 3 HP - Monoblock Pumpset |
| 687 | 5 HP - Monoblock Pumpset |
| 688 | 7.5 HP - Monoblock Pumpset |
| 689 | 10 HP - Monoblock Pumpset |
| 690 | 12.5 HP - Monoblock Pumpset |
| 691 | 15 HP - Monoblock Pumpset |
| 692 | Charges for Repair and Reconditioning of Sluice valve in pumproom and pipeline including cost of check nut and labour charges etc., |
| 693 | 300mm Sluice Valve |
| 694 | 250mm Sluice Valve |
| 695 | 200mm Sluice Valve |
| 696 | 150mm Sluice Valve |
| 697 | 100mm Sluice Valve |
| 698 | Replacement of non functioning unserviceble Gun metal Valve without affecting existing alignment by contractor tools excluding cost of valve but including required length of GI nipple, coupling etc., complete |
| 699 | 50 mm Gun metal valve |
| 700 | 65 mm Gun Metal valve |
| 701 | 80 mm Gun Metal valve |
| 702 | 100 mm Gun Metal valve |
| 703 | Supply and delivery of Gun Metal Valve |
| 704 | 50 mm Gun metal valve |
| 705 | 65 mm Gun Metal valve |
| 706 | 80 mm Gun Metal valve |
| 707 | 100 mm Gun Metal valve |
| 708 | Repair and Reconditioning of the double Air valve / Single Chamber Air Release valve including the cost of Air Valve Ball, Rubber washer and required Bolt & Nuts, etc., complete |
| 709 | 150mm Air Valve |
| 710 | 100mm Air Valve |
| 711 | 80 mm Air valve |
| 712 | 50 mm Air Valve |
| 713 | 25 mm Air Valve |
| 714 | Supply and delivery of the following Electrical works:consumable items at the site of work carry out the general maintenance works |
| 715 | Digital Voltmeter 3 phase |
| 716 | Digital Ammeter 3 phase |
| 717 | LED Outdoor Fittings (LIGHT EMITTING DIODE) Higher end - 30 W LED street light fittings |
| 718 | 4 Feet LED Fitting - Lower end - 15W LED Bulb |
| 719 | Replacement of the C.I.DOUBLE AIR VALVE AS PER ISI 14845/2000 AND WITH 5 YEARS WARRANTY |
| 720 | 150mm Air Valve |
| 721 | 100mm Air Valve |
| 722 | Replacement of the CI SINGLE AIR VALVE AS PER ISI 14845/2000 AND WITH 5 YEARS WARRANTY |
| 723 | 80 mm Air valve |
| 724 | 50 mm Air Valve |
| 725 | 40 mm Air Valve |
| 726 | 25 mm Air Valve |
| 727 | Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking |
| 728 | Supply and Delivery of L.T. Cables 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING |
| 729 | 3C 4 sq.mm |
| 730 | 3C 6 sq.mm |
| 731 | 3C 10sq.mm |
| 732 | 3C 16sq.mm |
| 733 | 3C 25sq.mm |
| 734 | 3C 50sq.mm |
| 735 | Supply and Delivery of PVC Insulated and Sheathed 3 Core Flat copper cable conforming to IS 694 / 1990 |
| 736 | 1.5 sq.mm |
| 737 | 2.5 sq.mm |
| 738 | 4.0 sq.mm |
| 739 | 6.0 sq.mm |
| 740 | 10.0 sq.mm |
| 741 | Overload Relays: Directly operated Bimetallic Thermal overload relay which operates in case of overload and also in case of under voltage with manual and auto reset mode. |
| 742 | Upto 5 A |
| 743 | 5 A to 10 A |
| 744 | 10 A to 20 A |
| 745 | 20 A to 30 A |
| 746 | 30 A to 50 A |
| 747 | 50 A to 75 A |
| 748 | 75 A to 110 A |
| 749 | 110 A to 150 A |
| 750 | 150 A to 200 A |
| 751 | 200 A to 300 A |
| 752 | Electric Motor protection device against single phasing. The device should protect the motor against single phasing, reverse phasing and unbalance supply. The device should be suitable for any auxillary device and have provisions for mounting in panel boards. Operate without need of any auxiliary supply. (Single Phasing Preventer) |
| 753 | Supply and Delivery of Porcelien Fuse Units |
| 754 | 32 Amps Porcelain Fuse Unit (500V) |
| 755 | 63 Amps Porcelain Fuse Unit (500V) |
| 756 | 100 Amps Porcelain Fuse Unit (500V) |
| 757 | Replacement for Supply and Delivery of Moulded Case Circuit Breaker For FCMA Soft Starter and other starters in TS, BS and GS |
| 758 | 400 AMPS |
| 759 | 315 AMPS |
| 760 | 300 AMPS |
| 761 | 200 AMPS |
| 762 | 250 AMPS |
| 763 | 160 AMPS |
| 764 | 125 AMPS |
| 765 | 100 AMPS |
| 766 | 63 AMPS |
| 767 | Supply and Delivery of 20 Amps Copper Fuse wire |
| 768 | Supply and Delivery of Grease for Motor and Pumpsets |
| 769 | Supply and Delivery of MCB Isolator |
| 770 | 32 A FP |
| 771 | 63 A FP |
| 772 | 100 A FP |
| 773 | Replacent of CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING AND WITH 5 YEARS WARRANTY - For Scour valve |
| 774 | 400mm |
| 775 | Supply and Delivery of 150mm dia Pressure Gauge and Vaccum guage including all accessories as per specification (For Suction and Delivery to be mounted on wall on Teak Wood Board) |
| 776 | Supply and Delivery of Change Over Switch |
| 777 | 32 Amps Three Phase 500V 4 Pole |
| 778 | 63 Amps Three Phase 500V 4 Pole |
| 779 | 100 Amps Three Phase 500V 4 Pole |
| 780 | 400 Amps Three Phase 4 Pole Change Over Switch |
| 781 | Electro magnetic contactors of suitable capacity in AC Three Phase rating, conforming to IS/ IEC 60947-4-1. |
| 782 | 12Amps |
| 783 | 18Amps |
| 784 | 22Amps |
| 785 | 25Amps |
| 786 | 32Amps |
| 787 | 40Amps |
| 788 | 80Amps |
| 789 | 110Amps |
| 790 | 185Amps |
| 791 | 225Amps |
| 792 | Supply and delivery of Coolant oil Suitable for 11 KV / 433 V Transformer and starter |
| 793 | Supply and Delivery of Breather Unit |
| 794 | Supply and Delivery of Silica Gel for filling the Breather unit |
| 795 | Supply and Delivery of Drop Out Fuse with 25 Amps Fuse wire with Porcelain Bushing Insulators for 11 KV Transformer |
| 796 | Supply and Delivery of Cork Gaskets and LT Brass Rods |
| 797 | 6mm Cork Gaskets |
| 798 | 8mm Cork Gaskets |
| 799 | LT Brass Rod |
| 800 | Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in six months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries, materials, labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers |
| 801 | Kuppachipatty Booster Sump - 1300000 Ltr |
| 802 | Chinnarediyapatty Booster Sump - 1300000 Ltr |
| 803 | Malayadipatty Booster Sump - 1300000 Ltr |
| 804 | Pannakombu Booster Sump - 1300000 Ltr |
| 805 | Puthanatham Booster - 400000 Ltr |
| 806 | Kondayanpatti Booster Sump - 400000 Ltr |
| 807 | Athupatti Booster Sump - 60000 Ltr |
| 808 | Madampatti Group Sump - 100000 Ltr |
| 809 | Kurumbapatti Group sump - 100000 Ltr |
| 810 | Chettiapatti Group sump - 10000 Ltr |
| 811 | Kalpalayathanpatti Group sump - 100000 Ltr |
| 812 | N.Pudur Group sump - 10000 Ltr |
| 813 | Manakundram Group sump - 60000 Ltr |
| 814 | Karaikulam Group sump - 150000 Ltr |
| 815 | Kadapitchampatti Group sump - 60000 Ltr |
| 816 | Servaikaranpatti Group sump - 10000 Ltr |
| 817 | Maniyankurichi Group sump - 30000 Ltr |
| 818 | Karumalai Group sump - 100000 Ltr |
| 819 | Pothapatti Group sump - 10000 Ltr |
| 820 | Azhaguchitirapatti Group sump - 10000 Ltr |
| 821 | Endapuli Group sump - 10000 Ltr |
| 822 | Kallakampatti Group sump - 100000 Ltr |
| 823 | Karaipatti Group sump - 30000 Ltr |
| 824 | Othakadai Group sump - 100000 Ltr |
| 825 | Chettiyapatti Group sump - 20000 Ltr |
| 826 | Venkatanaickanpatti Group sump - 30000 Ltr |
| 827 | Sadavelampatti Group sump - 60000 Ltr |
| 828 | M. Idayapatti Group sump - 100000 Ltr |
| 829 | Thethur Group sump - 60000 Ltr |
| 830 | Rajaramkadai Group sump - 150000 Ltr |
| 831 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete. |
| 832 | 6m Dia Collector well |
| 833 | 4.50m Dia Infiltration well |
| 834 | Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender