Power Boards / Undertakings / PSU Closing in 0 days TDR #58444291

Tender For Mtps-Ii - Mi Circle - Boiler Maintenance - Coh - 2026-27 - Cleaning Of The Accumulated Ash Inside Hot Primary Air Ducts, Hot Secondary Air Ducts And Flue Gas Ducts - Arresting The Air Leakage - Patch Up Works And Repair Works In ‘A Side.

Issued by Boards / Undertakings / PSU · Salem, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Nov 2026
0 days left
EMD
11300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Mtps-Ii - Mi Circle - Boiler Maintenance - Coh - 2026-27 - Cleaning Of The Accumulated Ash Inside Hot Primary Air Ducts, Hot Secondary Air Ducts And Flue Gas Ducts - Arresting The Air Leakage - Patch Up Works And Repair Works In ‘A Side.

BOQ

Name of Work:- MTPS-II - MI Circle - Boiler Maintenance – COH – 2026-27 - Cleaning of the accumulated ash inside Hot Primary Air ducts, Hot Secondary Air ducts and Flue gas ducts - Arresting the air leakage – Patch up works and repair works in ‘A side.
Sl. No. Item Description
1Opening of manhole doors and closing manhole doors after completion of work including changing of asbestos ropes and clamps in the doors.
2Removal of Ash deposit inside the inlet Flue gas duct, hot Primary air duct and hot Secondary air duct to '0'mtr.
3Transportation of ash & dumping the ash into MTPS Ash dyke from '0'mtr.
4Labour charges for welding eroded initial welding joints in the PA, SA & FG duct inlet and outlet below 2 mtr level (including the cost of welding electrodes)
5Labour charges for welding eroded initial welding joints in the PA, SA & FG duct inlet and outlet above 2 mtr level (including the cost of welding electrodes)
6Cutting and removal of eroded guard plates over the expansion joint and providing new guard plate of size 3.15 mm HR sheet over the expansion joint after completion of inspection and patch welding works on expansion joints.
7Transporting the 6mm MS Chequered plates from central stores / MTPS to Boiler area, cutting in to required size, leading, lifting, positioning on the eroded portions of the PA,SA &FG duct below 1.5mtr and welding the same including cost of welding electrodes.
8Transporting the 6mm MS Chequered plates from central stores / MTPS to Boiler area, cutting in to required size, leading , lifting , positioning on the eroded portions of the PA, SA & FG duct inlet and outlet above 1.5mtr side wall portion and Top portion of the PA, SA & FG duct and welding the same including of welding electrodes.
9Drawal of 6mm M.S plate from central stores transporting the materials to outside workshop cutting in to required size, bending to the required size and profile, transporting back to ESP flue gas inlet area.
10Transporting new deflector plate and leading to flue gas duct, leading , lifting to Boiler Flue gas ducts. Fixing and welding in the duct and to the correct contour. Placing the deflector plate in the guide angle and welding the same.
11Renewal of Flue gas bracing pipe in ESP inlet flue gas duct.This work involve making the scaffolding arrangement, removing the eroded bracing pipes, fixing the new pipes, lead & lift, position and welding , devolute the scrap from site to stores.
12Fixing and removing the scaffolding arrangements for insulation work around the Flue gas duct,Hot PA duct and APH.
13Removal of insulation Single layer (60mm thick) wool mattress, G.I Cladding sheet, stiffeners, retainer plates etc. welding the support plates, rectification and refixing the existing insulation Single layer (60mm thick) wool mattress, GI sheets, lead and lift etc in the required area of Flue gas duct and Air Pre Heater with new fastners
14Non Metallic : Cutting and dismantling of existing fabric compensator for the renewal of expansion joint of size 8800x3800 of APH Flue gas outlet duct Cutting and removal of eroded expansion joint of size 8800 X 3800. This work involves providing platforms inside and outside the ducts,locking and arresting the upstream and downstream sides of flue gas ducts, cutting, dismanting and removal of the damaged expansion joint and devoluting the same to the Central Stores/MTPS- II.
15Drawal of new fabric compensator of size 8800x3800 from Central Store / MTPS-II and transporting to Boiler area lifting, leading and erection in position, alignment with flue gas duct and welding. Finally cutting and removing all the locking and arresting arrangement, This work including the transporting charges of materials from Central Store to Boiler. (Including the cost of welding electrodes.
16Removal of Ash deposit inside the outlet Flue gas duct.
17Transportation of ash & dumping the ash into MTPS Ash dyke from '0'mtr. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58444291
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 16-11-2026
Authority
Authority Name Tamil Nadu Generation And Distribution Corporation Limited
Work Description Tender for Mtps-Ii - Mi Circle - Boiler Maintenance - Coh - 2026-27 - Cleaning Of The Accumulated Ash Inside Hot Primary Air Ducts, Hot Secondary Air Ducts And Flue Gas Ducts - Arresting The Air Leakage - Patch Up Works And Repair Works In ‘A Side.
Basic Detail
Tender No OT 67 Cleaning of the accumulated ash inside Hot Primary Air ducts A Side
Bidding Type Tender
Location
City Salem
State Tamil Nadu
Key Dates
Publish Date 07 Nov 2026
Submission Date 16 Nov 2026
Open Date 17 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 11300
Exemption Available
Document List
8bbc60bb-b0e3-462b-a885-10b730c8260c.html
BOQ_869429.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 16, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

8bbc60bb-b0e3-462b-a885-10b730c8260c.html

xls

BOQ_869429.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender