Tender For Improvement Works By Replacing The Damaged Weathering Coarse, Doors & Windows And Providing Necessary Wiring Arrangements Along With Allied Civil Works To The Cso Office Buildings, B-Section Building And Godown Building At Pasumalai Tneb C
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
12 days left
EMD
5880
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Works By Replacing The Damaged Weathering Coarse, Doors & Windows And Providing Necessary Wiring Arrangements Along With Allied Civil Works To The Cso Office Buildings, B-Section Building And Godown Building At Pasumalai Tneb Campus, Madurai.
BOQ
| Sl. No. | Item Description |
| 1 | “Improvement works by replacing the damaged weathering coarse, doors & windows and providing necessary wiring arrangements along with allied civil works to the CSO office buildings, B-section building and godown building at Pasumalai TNEB Campus, Madurai\\". |
| 2 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm without pedestal with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 3 | Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 36) |
| 4 | Wiring with 2 x 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 39) |
| 5 | Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point (for electronic regulator) including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 16) |
| 6 | Supplying and fixing 20W 4 Feet LED Fitting with LED including cost of all materials, labour charges, T&P, lead, lift, etc., complete. |
| 7 | Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp including cost of all materials, labour charges, T&P, lead, lift, etc., complete. |
| 8 | Providing and fixing in position Plain glass 4mm thick for replacement of damaged window glasses including labour charges for fixing, cost of materials, lead, lift etc., complete. |
| 9 | Manufacturing and supplying of Steel door/window using 40x40x6mm for outer frame, 25x25x6mm for shutter frame with MS flat 25x6mm 3nos and for panels with 18swg MS sheet with bolts, washers, hinges 12mm dia tower bolt of 200x38x2.40mm at top and 150x38x2.4mm at bottom and one no 250x16mm aldrop etc., complete as per standard drawing and specn as well as per the direction of engineer at site including cost of all materials, labour, lead, lift, etc., complete. |
| 10 | Dismantling the damaged existing terrace tiles flooring with weathering course without damaging the roof slab and removing of excess concrete wastages from the site as directed by the site engineer including cost of all materials, labour, lead, lift, etc., complete. |
| 11 | Providing weathering course with good quality of pressed tiles 20cm x 20cm x 2cm using CM 1:3 mix mixed with water proofing compound and pointed with the same mortor including cost of all materials, curing, labour, lead, lift etc., complete. |
| 12 | Pointing the pressed terrace tiles using CM 1:3 mix with water proofing compound including cost of all materials, labour, lead, lift etc., complete. |
| 13 | Clean removal of plaster for walls as instructed by Site officer including cost of all materials, labour, lead, lift, etc., complete. |
| 14 | Chipping of concrete and roughening the surface of damaged ceiling, damaged concrete from Lintel, roof level, Plinth level, flooring patchwork etc., and removing of excess concrete wastages from office premises as directed by the site engineer and redo the same with Plastering using CM 1:3 mix 20mm thick with water proofing compound and adhesive chemicals/compounds including cost of all materials, curing, labour, lead, lift, etc., complete. |
| 15 | Plastering with CM 1:5 mix using 12mm thick for inner walls including cost of all materials, labour, lead, lift, etc., complete. |
| 16 | Supply, erection and fabrication of MS square section pipes to support Galvalume colour sheet of size 0.47mm including cost of all materials, labour, lead, lift, etc., complete. |
| 17 | Supplying, fabricating and fixing new Galvalume colour sheet of size 0.47mm for staircase Head room roof, verandah sunshades and window sunshades including fabrication charges, J.Bolts & hooks on roof, frames, cost of all materials, labour charges, lead, lift etc., complete (but excluding cost of MS hollow pipe supports). |
| 18 | Supplying, laying and jointing of 25mm PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (including cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof. |
| 19 | Dismantling of windows including removal of frames, hinges and fastening and removing of excess concrete wastages from yard premises as directed by the site engineer including cost of all labours, materials, lead, lift, etc., complete. |
| 20 | Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make) laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges,labour, lead, lift, etc. complete. |
| 21 | Supplying, fabricating, erecting and fixing Calcium Silicate Board (10mm thick) False Ceiling upto a ceiling height of 4.5m from Floor level including cost of materials, labour charges, lead, lift, etc, complete. |
| 22 | Painting with two coats of ready mixed synthetic enamel paint of approved quality on iron works over one coat of red oxide primer including cost of all materials, labour, lead, lift, etc., complete. |
| 23 | GST for bidders within Tamilnadu |
| 24 | GST for bidders outside Tamilnadu |
| 25 | IGST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender