Tender For Under Councillor Fund (Budget Year - 2026-27) Forming Of Interior bituminous Road At Ganapathy Nagar 2Nd Street Extension In Dn-27, Unit-7, Zone-3
Tender Value
6.63 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
6700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Under Councillor Fund (Budget Year - 2026-27) Forming Of Interior bituminous Road At Ganapathy Nagar 2Nd Street Extension In Dn-27, Unit-7, Zone-3
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork Excavation And Deposting on Bank With Initial Lead of 10 m And Initial Lift of 2m In Hard Stiff Clay Stiff Black Hard Shales Muram Gravel Stoney Earth And Earth Mixed With Small Size Boulders And Hard Gravelly Soil (SS 20A) |
| 2 | Providing and Laying Granular sub base (GSB) by provided coarse graded material confirming to ( table 400-1) mixing in a mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacted with vibratory power roller to achieve the desired dry density to the required grade and cross slope as per drawings all others incidental charges etc.complete as per clause of 401 Morth Specification |
| 3 | Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 |
| 4 | Providing And Laying of Hot Applied Thermoplastic Compound 2.5 mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness of 2.5 mm Is Exclusive of Surface Applied Glass Beads As Per Irc:35 The Finished Surface To Be Level Uniform And Free From Streaks And Holes Etc Completed As Per Mort& H Specification No.803 |
| 5 | Supplying And Fixing of Digitally Printed Retroreflective Single Arrow Sign Board Made of Type Xi Grade Cube Corner Micro Prismatic Grade Sheeting Confirming To Irc 67-2012 As Per Astmd-4956-09 Specifications, Digitally Printed Using Latex Printer For Traffic Colour Logos/Text And Laminated With Clear Electro-Cut Film And Applied To Proper Prepared Sign Substrate Made of 4mm Thick Aluminum Composite Material (Acm) And Back Support Frame Angle of 25mm X 25mmx3mm Supported By 32Nb, 2.7mm Thick Stainless Steel Pipe All Round In 304 Grade And 2 Nos. of Vertical Posts of 65Nb, 3.04mm Thick Stainless Steel Pipe of 304 Grade Firmly Fixed To The Found By Means of Properly Designed Foundation of Size 300 mm X 300 mm X 450 mm With M15 Grade Cement Concrete And The Item Shall Include Earthwork Excavation, Cost of Materials, Loading, Unloading, Lead, Lift, Transportation Etc, Complete As Per Approved Template. The Sign Board Base Made of Type Xi Micro Prismatic Grade Reflector Sheeting of White Color Should Pass Minimum Co-Efficient of Retro-Reflection Values As Per The Table 6.9 of Irc 67-2012. The Retro Reflective Sheeting Shall Be Covered Under 10 Years Warranty Issued For Field Performance And Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained By The Engineer-In-Charge. The Warranty Shall Be Inclusive of Digitally Printed Logos/Text/Legends And Their Bonding To The Retro-Reflective Sheeting (As Per Mort&H Specification No.801). The Latex Printer Used For Digital Printing Should Be Used With Inks of Low Voc Emission And Should Have Greenguard, Eco Logo Certificate As Per Ul 2801 Standards. The Warranty & Test Certificates Shall Be Obtained From The Retro-Reflective Sheeting Manufacturer By The Contractor And Shall Be Submitted To Engineer-In-Charge. |
| 6 | Raising Or Lowering 45 cm.(or) 60 cm. Dia Cast Iron Man Hole Frames And Door Including Brick Work Second Class Table Boulded (Chamber Burnt) Brick of Size 9 X 4.3/8\\"X2.3/4\\" In cm. 1:3 With C.C 1:2:4 Using 20mm Irc Size B.G. Metal And Rendering Smooth The Top Surface With Cement Etc. Complete |
| 7 | Providing and laying Prime Coat 7Kg/10 M2 With Bitumen Emulsion (Slow Setting) |
| 8 | Providing and laying Tack Coat 2.5 kg/10 m2 with Bitumen Emulsion (Rapid Setting 1 |
| 9 | Providing and laying 50mm consolidated thick bituminous macadam u with bitumen boiler, tipper trucks, paver finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as perspecification using CMP as per clause 504 of MORTH Rev-5 |
| 10 | Providing and laying Bituminous Concrete to 30 mm thick with bitumen boiler, tipper trucks, paver finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender