Tender For Iimprovement Works By Replacing The Damaged Worn Out Existing Wirings, Lightings With Other Electrical Accessories In Aee/Pro, Aee/Gl, Ae/Mm, Ae/Development Office Rooms And Providing New Aluminium Partition Between Ae/Gl And Ae/Developmen
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
13 days left
EMD
2359
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Iimprovement Works By Replacing The Damaged Worn Out Existing Wirings, Lightings With Other Electrical Accessories In Aee/Pro, Aee/Gl, Ae/Mm, Ae/Development Office Rooms And Providing New Aluminium Partition Between Ae/Gl And Ae/Development At Centre Office, Madurai Edc, K.Pudur Office Campus.
BOQ
| Sl. No. | Item Description |
| 1 | “Improvement works by replacing the damaged worn out existing wirings, lightings with other electrical accessories in AEE/PRO, AEE/GL, AE/MM, AE/Development office rooms and providing new aluminium partition between AE/GL and AE/Development at Centre Office, Madurai EDC, K.Pudur office campus”. |
| 2 | Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 36) |
| 3 | Wiring with 2 x 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 39) |
| 4 | Supplying and fixing 20W 4 Feet LED Fitting with LED including cost of all materials, labour charges, T&P, lead, lift, etc., complete. |
| 5 | Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point (for electronic regulator) including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 16) |
| 6 | Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp including cost of all materials, labour charges, T&P, lead, lift, etc., complete. |
| 7 | Supplying and fixing Wall mounting Fan (400mm sweep) including cost of all materials, labour charges, T&P, lead, lift, etc., complete. |
| 8 | Supplying, fabricating and fixing in position Aluminium fixed partition using 63.50x38.10x2mm @1.127 kg/m Alu.section at 900mm C/C in vertical direction and 1300mm @ C/C at horizontal direction with necessary rubber beadings Alu.clips, of size 17.27x17.15x1.40mm@ 0.175 kg/m and using 12 mm thick both side laminated with 1 side Melamine finish including cost of all materilas, all necessary aluminium fittings such as glazing clips, cleats, screws, rubber beadings, labours, power consumptions required for fabrications, drilling holes in RCC column, slab, masonry walls wherever necessary with powerdrills to the required extent and make good to the original condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections are to be anodised with matt finish under electrically controlled conditions in accordance with IS 1868/1962 for an avereage abiduc film thickness of 15 microns etc. complete. |
| 9 | GST for bidders within Tamilnadu |
| 10 | GST for bidders outside Tamilnadu |
| 11 | IGST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender