Tender For Labour Charges For Repairing And Rewinding Of The Following 5 Nos.Lt Motors (I) 75Kw/ 100Hp/3Phase/415V/ 1475Rpm/Abb Make In Acc Fan Motor#2 (Ii) 45Kw/60Hp/3Phase/415V/ 2950Rpm/ Kirloskar Make In Ipbfp#2 (Iii)15Kw/20Hp/3 Phase/415V/2890Rpm
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
9 days left
EMD
1250
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramanathapuram → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Labour Charges For Repairing And Rewinding Of The Following 5 Nos.Lt Motors (I) 75Kw/ 100Hp/3Phase/415V/ 1475Rpm/Abb Make In Acc Fan Motor#2 (Ii) 45Kw/60Hp/3Phase/415V/ 2950Rpm/ Kirloskar Make In Ipbfp#2 (Iii)15Kw/20Hp/3 Phase/415V/2890Rpm/ Kirloskar Make In Dd Seal Air Fan Motor #2 (2 Nos) And (Vi) Oil Mist Eliminator Fan Motor#1 (88Qv) 11Kw/15Hp/415V/2935Rpm/ Siemens Make Induction Motors.
BOQ
| Sl. No. | Item Description |
| 1 | Stator Rewinding Charges towards dismantling the motor, threading out the rotor from the stator core pack, stripping out the old winding, rewinding the stator of the above motor using of dual coated class “H” polyamide imide enameled copper wire with class “F” style of insulation and using flexible fibre glass cable, inserting the windings, leading out the end connection, preheating, varnishing with Dr.Beck’s Isonel 31J mixed with thineer 31J, baking in oven, applying finishing varnish to the overhang portions and conducting no load trial run at rated voltage on grounded bed stimulating the site condition and measuring both electrical and mechanical parametersi) 45KW/60HP/3phase/415V/2950RPM/ Kirloskar make in IPBFP#2 |
| 2 | ii) 15KW/20HP/3phase/415V/2890RPM/ Kirloskar Make in DD Seal air fan motor #2 |
| 3 | iii) Oil mist Eliminator Fan motor#1 (88QV) 11KW/15HP/415V/2935RPM/ Siemens Make induction motors. |
| 4 | Rotor MachiningCharges for metal filling, machining, polishing and repairing of worn out shafts/bearing seating surfaces on DE and NDE sides, checking of bearing housings, providing sleeves in the end covers on DE & NDE sides and Bearing replacementi) 45KW/60HP/3phase/415V/2950RPM/ Kirloskar make in IPBFP#2 |
| 5 | 15KW/20HP/3phase/415V/2890RPM/ Kirloskar Make in DD Seal air fan motor #2 |
| 6 | Oil mist Eliminator Fan motor#1 (88QV) 11KW/15HP/415V/2935RPM/ Siemens Make induction motors |
| 7 | Rotor Shaft ReplacementCharges towards mounting the rotor in the lathe, removing the core locks, shifting the rotor to hydraulic press, positioning the shaft in hydraulic press using special jigs and fixtures, warming the core pack, removing the old shaft from the core pack, machining EN8 shaft, providing new key way to the core portion, kept the rotor core pack inside the hot chamber, after reaching the core pack to 150OC shift to hydraulic press, inserting new shaft in hydraulic press to ensure proper shrunk-fit, machining the shaft and making the key ways wherever required, providing both end Bearings including assembling and testing the motori) 75KW/ 100HP/3phase/415V/ 1475RPM/ABB Make in ACC Fan Motor#2 |
| 8 | Charges towards dynamically balancing the rotor.i) 75KW/ 100HP/3phase/415V/ 1475RPM/ABB Make in ACC Fan Motor#2 |
| 9 | ii) 45KW/60HP/3phase/415V/2950RPM/ Kirloskar make in IPBFP#2 |
| 10 | iii) 15KW/20HP/3phase/415V/2890RPM/ Kirloskar Make in DD Seal air fan motor #2 |
| 11 | iv) Oil mist Eliminator Fan motor#1 (88QV) 11KW/15HP/415V/2935RPM/ Siemens Make induction motors |
| 12 | Charges for Transport for To and Fro |
| 13 | Less old stator copper scrap i) 45KW/60HP/3phase/415V/2950RPM/ Kirloskar make in IPBFP#2 |
| 14 | ii) 15KW/20HP/3phase/415V/2890RPM/ Kirloskar Make in DD Seal air fan motor #2 |
| 15 | iii) 11KW/15HP/415V/2935RPM/ Siemens Make induction motors Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender