Road Transport and Highways Government Departments Closing in 8 days TDR #58444083

Tender For Providing Junction Improvements At Km 375/4 Of Varanasi - Kanniyakumari Road (Abandoned Nh 7 Part ) Dindigul

Issued by Government Departments · Dindigul, Tamil Nadu
Tender Value
1.26 Crore
Estimated cost
Bid Submission
25 Nov 2026
8 days left
EMD
73500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dindigul → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Junction Improvements At Km 375/4 Of Varanasi - Kanniyakumari Road (Abandoned Nh 7 Part ) Dindigul

BOQ

Name of Work:-
Sl. No. Item Description
1Excavation Excavation including removal and satisfactory disposal of all materias necessary for the construction of roadway and side drains in accordance with the specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer including compaction by power roller rolling as per MORTH Specification no.111,112,301,305,900 Box Cutting for widening
2JUNCTION IMPROVEMENTS AT KM 375/4
3Providing, laying, spreading and compacting graded stone aggregates for Granular Sub Base, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 for grading- V Material
4JUNCTION IMPROVEMENTS AT KM 375/4
5Providing, laying, spreading and compacting graded stone aggregates for Granular Sub Base, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5- for grading- III Material
6JUNCTION IMPROVEMENTS AT KM 375/4
7Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
8JUNCTION IMPROVEMENTS AT KM 375/4
9Providing and laying Prime Coat over WBM/ WMM surface using 7 Kg of Emulsion Bitumen (SS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 502 of MORTH Rev-5
10JUNCTION IMPROVEMENTS AT KM 375/4
11Providing and laying Tack Coat over WBM/ WMM surface (treated with primer) using 2.50 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as
12JUNCTION IMPROVEMENTS AT KM 375/4
13Providing and laying Tack Coat over Existing BT surface using 2 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 503 of MORTH Rev-5
14JUNCTION IMPROVEMENTS AT KM 375/4
15Providing, laying 75mm consolidated thick Dense Bituminous Macadam using 0.40cum of 37.50-13.20mm, 0.35cum of 13.20-2.36mm and 0.36cum of 2.36mm & below size IRC metal with 71.30kgs of VG40 grade bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen, aggregate and mixing them in the required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to site, spreading the mix to uniform thickness of 75mm with mechanical paver to the specified grades and cross sections and consolidated by Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including all other incidental charges etc., complete as per specification using CMP as per clause 505 of MORTH rev-5 - Grading I
16JUNCTION IMPROVEMENTS AT KM 375/4
17Providing and laying Bituminous Concrete to 30/40mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5
18JUNCTION IMPROVEMENTS AT KM 375/4
19Refilling excavated earth in trench portion including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with the specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer
20JUNCTION IMPROVEMENTS AT KM 375/4
21Construction of cement concrete kerb with top and bottom width 115 and 165 mm respecively, 325 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408.
22JUNCTION IMPROVEMENTS AT KM 375/4
23Earthwork excavation in all classes of soils except hard rock requring blasting depositing on bank with all leads and lifts as per SS 20B including cost of all labour,materials, tools, equipments and all incidential charges such as bailing out water providing and maintaining necessary conferdams, sheeting, shoring, bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and cleaning the site and disposal of all surplus materials etc complete as per relevant standard specifiation for FOUNDATION
24JUNCTION IMPROVEMENTS AT KM 375/4
25Vibrated Cement Concrete M15 grade (Nominal Mix 1:2:4) using 40mm ISS size hard granite broken metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights,hire charges for all tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for FOOTINGS OF Levelling course
26JUNCTION IMPROVEMENTS AT KM 375/4
27Vibrated Cement Concrete M20 grade (Nominal Mix 1:2:4) using 40mm ISS size HBG metal including cost and conveyance of all materials to site, including cost of cement at site including cost of form work soft water labour charges for mixing transporting laying and curing concrete working at heights, tools and plants and maintaining of protective bunds, coffer dams, shoring strutting etc., complete as per standard specification for Median (below sill level)
28JUNCTION IMPROVEMENTS AT KM 375/4
29Excavation for Roadway and drainage Excavation including removal and satisfactory disposal of all materias necessary for the construction of roadway and side drains in accordance with the specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer, as per MORTH Specification. Refilling for Kerb Median [ Barrier Type] Center portion using Cut earth
30JUNCTION IMPROVEMENTS AT KM 375/4
31Providing and laying of hot applied thremoplastic compound 2.5mm thick including reflectorising glass beads @ D 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, centre line marking.
32JUNCTION IMPROVEMENTS AT KM 375/4
33Providing and fixing reflective road studs of 'category B' Raised payment markers made out of poly carbonate / SBD moulded body and reflective panels (bi-convex reflectors) with micro prismate lens capable of providing tal internal reflection of the light entering the lens face with retro-reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW/NH 33023/10/97-DO III Dt.11-06-97 and the length height and width of the body shall not be less than 100mm, 15mm amd 90mm and base of marker shall be flate within 1.3mm. The marker shall support a load of 13635Kg tested in accordance with ASTM D4280. Lence shall be moulded of poly carbonate or methyl methecrylate conforming ASTM D788. The area of each retro-reflectory surface shall be 35+5 degree to base. Each reflector shall have a CIL not less than values specified in table 2 of said MORTH & H circular and two cylindrical polymer shanks of not less than 20mm diameter and not less than 30mm length shall be provided for better anchorage.
34JUNCTION IMPROVEMENTS AT KM 375/4
35Providing and Fixing of Retro Reflectorised Hazard Marker Traffic Sign made out of High Intensity Prismatic Grade sheeting confirming to Type IV Standards of IRC - 67 :2012 and ASTM D 4956-09, Specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmX25mmX3mm Mild steel angle and supported ona mild steel angle post 75X75X6mm and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45mmX45mmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro - reflectro sheet shall consist of minimum coefficient of Retro - Reflection as per Table 6.6 of IRC 67-2012. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained :as per IRC 67:2012 (as per MORT&H Specification No.801)
36JUNCTION IMPROVEMENTS AT KM 375/4
37Providing and Fixing of Retro Reflectorised Cautionary, mandatory and Informatory signs (with or without definition board) made out of High Intensity Prismatic, Grade Sheeting confirming to IRC 67-2010 and ASTM D 4956-09, Type IV Specification and fixed over 1.5mm thick Aluminium sheet fixed on back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle iron post 75mm x 45mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60cm below Ground Level etc, complete including 7 year warranty for the Retro Reflective Sheeting as per clause 6.9 of IRC 67:2010 Specification (as Per MORT&H Spec. No.801)
38(i) Retro-Reflectorised Road Signs: (without definition board) (90 cm Equilateral Triangular Board)
39(ii) Retro-Reflectorised Road Signs: (without definition board) (60 cm Circular Board)
40(iii) Retro-Reflectorised Road Signs: (without definition board) (90 cm High octagon Board)
41(iv) Retro-Reflectorised Road Signs: (without definition board) (80 cm x 60 cm Rectangular Board)
42Calculation of SubTotal, GST and Total Amount carried out by system automatically
43Basic cost of value put to tender as per estimate
44Add GST at 18%
45Total Value put to Tender
46Excess/Less Percentage
47Final Value
48Add GST at 18% of Final Value
49Total Value of Contract Including 18% of GST Basic cost of value put to tender as per Estimate Please Enable Macros to View BoQ information
50Total Value of Contract Including 18% of GST Basic cost of value put to tender as per Estimate Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58444083
AUTHORITY Government Departments
TENDER VALUE 1.26 Crore
LAST DATE 25-11-2026
Authority
Authority Name Highways Department
Work Description Tender for Providing Junction Improvements At Km 375/4 Of Varanasi - Kanniyakumari Road (Abandoned Nh 7 Part ) Dindigul
Basic Detail
Tender No TN.NO.05/2026-27/SDO/dated 03.11.2026
Bidding Type Tender
Location
City Dindigul
State Tamil Nadu
Key Dates
Publish Date 07 Nov 2026
Submission Date 25 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 1.26 Crore
Tender Fee Ref. Documents
EMD 73500
Exemption Not Available
Document List
41f52ba9-9f5d-4e3f-9840-2cdfa0f53741.html
BOQ_867603.xls
tenderdoument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

41f52ba9-9f5d-4e3f-9840-2cdfa0f53741.html

xls

BOQ_867603.xls

pdf

tenderdoument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender