Tender For Proposed Development Of Mini Industrial Estate At Nagehta Village Hardoi, Up
Tender Value
2.06 Crore
Estimated cost
Bid Submission
21 Nov 2026
2 days left
EMD
2.06 Lakhs
Bank guarantee accepted
Document Fee
4880
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hardoi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Development Of Mini Industrial Estate At Nagehta Village Hardoi, Up
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads transporting to site spreading grading to required slope and compacting to meet requirement of table 300-2. |
| 2 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)DSR(4.1.8) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)DSR(6.1.2). |
| 4 | 15 MM Cement plaster on the rough side of single or half brick wall of mix. 1:4 (1 cement : 4 fine sand ) |
| 5 | P/Applying white cement based putty of average thickness 1 mm of approved brand and manufacture overe the plastered wall surface to prepare the surface even and smooth complete. |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture of reqired colour to give an even shade , two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 7 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 8 | Construction of granular sub-base by providing coarse graded material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401.For Grading-I Material |
| 9 | Construction of granular sub-base by providing coarse graded material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401.For Grading-II Material |
| 10 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing |
| 11 | Construction of un-reinforced dowel jointed, plain cement concrete pavement over a prepared sab bas with approve grade cement @ 420 kg per cum, coars and fine aggregate conforming to IS 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix desing, transported to site,laid with a fixid form or slip form paver,spread, compacted and finished in a continuous operation including provision of contraction expansion, contraction and longitudinal joints, joint filler, separation membrane,sealant primer, joint sealant, debonding strip, dowel bar,tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing |
| 12 | Providing & Laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B) over base of local sand including levelling & dressing of surface to required level & slope filling joints with local sand T & P complete. DSR 16.91.1 |
| 13 | Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. |
| 14 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 metre and lead upto 30 Mtr. Including filling watering and ramming of excavated earth into the trenches of into the space between the building and the sides of foundation trenches or into the plinth and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the foundation trenches.DSR 2.6.1 |
| 15 | 1:4:8 (1 cement :4 coarse sand : 8 graded brick aggregate 40 mm nominal size.dsr 4.1.8 |
| 16 | 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded Stone aggregate 20 mm nominal size.DSR5.1.2 |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more DSR 5.22.6 |
| 18 | Centring and shuttering including strutting pwd below plinth Foundation DSR 5.9.1 |
| 19 | Centring and shuttering including strutting wall dsr 5.9.2 |
| 20 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil dsr2.8.1 |
| 21 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)DSR(4.1.8) |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for massconcrete.DSR(5.9.1) |
| 23 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources)DSR(5.1.3) |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe-500D or more.DSR(5.22.6) |
| 25 | Strutural Steel work in single section fixed with or without connecting plate including cutting hoisting fixing in position and applying and primimg coat of aaproved steel primer etc all complete item.. DSR-10.1 |
| 26 | Steel work in Built up Tubular ( round, square or rectangular hollow tubes etc) trusses etc including cutting hoisting fixing in position and applying a primimg coat of approved steel primer including welding and bolted with special shaped washers etc all Complete item DSR 10.16.3 |
| 27 | Manufacturing supplying and fixing retro reflective overhead signage board made up of 2mm thick aluminium sheet (overhead informatory road signage) D.S.R.-16.60.1 |
| 28 | Less 5% Deptt. Work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender