Tender For Construction Of 5 Sheetr Toilet At Roadways Bus Stand In Ward 4
Tender Value
8.19 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
4 days left
EMD
81957
Bank guarantee accepted
Document Fee
970
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bijnor → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 5 Sheetr Toilet At Roadways Bus Stand In Ward 4
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Excavation in foundation in ordinary soil in cluding lift up to 1.5 m Item No251 |
| 3 | Cement concrete with 2cm guage approved stone ballast coarse sand and cement in proportion in 1:4:8 including supply of all material labour and T&P etc. required for proper completion of work. |
| 4 | Brick Masonry work in 1:3 (1 cement : 3 coarse sand) cement mortar in foundation complete excluding pointing and plastering.SOR Ch. No. 6 item no. 307 |
| 5 | earth work in filling upto 5km cartage |
| 6 | Laying and Jointing PVC Pipe. Heading |
| 7 | R.C.C work in 1:1.5:3 with cement,coarse sand and stone ballast of 2cm guage including supply of all material,labour and T&P etc.required for proper completion of work |
| 8 | R.C.C work in 1:1.5:3 with cement,coarse sand and stone ballast of 2cm guage including supply of all material,labour and T&P etc.required for proper completion of work |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | M-150 brick work in One part cement and Three part Course sand mortar in foundation and plinth including supply of all materials, labour & T&P required for proper completion of work For Super strecture. as per SI.No. 309 of chap no. 6 |
| 11 | 12mm thick Plaster in 1:4 with cement,coarse sand mortar including supply of all material ,labour and T&P etc.required for proper completion of work |
| 12 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 13 | Applying Oil Bond distempering/ snowcem with primer coatincluding supply of all material ,labour and T&P etc.required for proper completion of work |
| 14 | Cement concrete with 2cm guage approved stone ballast coarse sand and cement in proportion in 1:2:4 including supply of all material labour and T&P etc. required for proper completion of work. |
| 15 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 16 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 17 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 18 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 19 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore |
| 20 | Supply & fixing of 10cm internal dia P.V.C. pipe comlete with bands i/c all comp work. (As per P.W.D. Schedule S.I. No. 730) |
| 21 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | Supply and Fixing 6mm thick China Glazed Tiles of first quality in skiriting or dado.. Item No. 628 |
| 24 | Providing & Fixing G.I Pipe complete with G.I Fitting and clamps, inculuding cutting and making good the wall etc. internal work-exposed on wall. 15mm dia (As per P.W.D Schedule Item No. 18.10.1) |
| 25 | Painting Steel work with Deluxe Multi Surface Paint to give an |
| 26 | in gst Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender