Tender For Installation Of Cold Drinking Water Project At Tapshikhata 2 No Bfp Primary School Pararpar Gp Under Alipurduar I Ps Under Alipurduar Zilla Parishad.
Tender Value
9.72 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
4 days left
EMD
19458
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Cold Drinking Water Project At Tapshikhata 2 No Bfp Primary School Pararpar Gp Under Alipurduar I Ps Under Alipurduar Zilla Parishad.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work up to plinth level, 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement Mortar 1:4 (1 cement : 4 coarse sand). |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement Mortar 1:4 (1 cement : 4 coarse sand). |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 mix. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns etc. for mass concrete. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilever. |
| 10 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement : 6 coarse sand). |
| 11 | 12 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand). |
| 12 | Finishing walls with waterproofing cement paint of required shade, new work (two or more coats applied @ 3.84 kg/10 sqm). |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two or more coats on new work. |
| 14 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete, fixed to steel windows by welding. |
| 15 | Supply, fitting & fixing 1 No. Aquaguard storage cooler cum purifier including fitting, fixing complete and electrical work with 1 HP motor complete. |
| 16 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTM D-1785 and threaded to match with GI Pipes as per IS : 1239 (Part-I), 50 mm dia PVC Pipe. |
| 17 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTM D-1785 and threaded to match with GI Pipes as per IS : 1239 (Part-I), 25 mm dia PVC Pipe. |
| 18 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank. |
| 19 | RIGBORE TUBE WELL Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipment, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 150 metre depth below ground level. Rocky strata including Boulders, 300 mm dia |
| 20 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/plain bevel ended pipe (type A) of required dia, conforming to IS:8110, including painted with outside surface with two coats of anticorrosive bitumestic paint. 100 mm nominal size dia |
| 21 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818. 100 mm nominal size dia |
| 22 | Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel fine/medium/coarse, in required grading & sizes as per actual requirement |
| 23 | Development of tube well in accordance with IS:2800 (Part-I) and IS:11189, including air compressor, yield measurement, water testing and disinfection |
| 24 | Providing and fixing Bail plug/Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (Part-I). 100 mm dia |
| 25 | Supply, Installation, Testing & lowering of 2HP water filled submersible pump motor set completed having suitable discharge as per yield of well. Submersible cable of 30 mtr 3 core 2.5 sqmm with MOC and necessary control panel and starter as per manufacturer specification |
| 26 | Providing and fixing CPVC Pipes. 50 mm nominal dia Pipes |
| 27 | Providing and fixing CPVC Pipes. 20 mm nominal dia Pipes |
| 28 | Providing and fixing CPVC Pipes. 15 mm nominal dia Pipes |
| 29 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 30 | 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 31 | Supplying, fixing and installation of CC muffing of feeder piller (2'×2.5'×1') box fabricated by 14 SWG MS sheet with angle for main switch starter including SFU, DOL Starter, meter board etc. |
| 32 | Supply & Laying 1.1 KV glande 2x10 sqmm PVC/A Al cable in UG trench as to GS with 1x6 SWG GI wire |
| 33 | Supply & fixing of compressive type cable gland as to GS for 2x10 PVC/A cable |
| 34 | Earthing with 50 mm dia GI pipe 3.64 mm thick × 3.04 m long complete with GI wire, GI bolts, protection pipe etc. |
| 35 | Making soak pit 2.5 m diameter × 3.0 m deep with dry brick honey comb shaft, bricks and S.W. drain pipe complete |
| 36 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for Platform, Platform Wall, Drain & Drain Wall |
| 37 | Providing & fixing Concrete Sign Board as per IRC specification of size 900 × 750 × 37 mm complete |
| 38 | Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender