Power Boards / Undertakings / PSU Closing in 4 days TDR #58437310

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Industry Unit; Pipelines; Consumables Provided By Service Provider Other Than Fim - Erection Of Ss304l Piping In Sizes From 8 Nb,Sch40 To 100Nb,Sch4

Issued by Boards / Undertakings / PSU · Mumbai Suburban, Maharashtra
Tender Value
12.98 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
25965
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
1

Project Description

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Industry Unit; Pipelines; Consumables Provided By Service Provider Other Than Fim - Erection Of Ss304l Piping In Sizes From 8 Nb,Sch40 To 100Nb,Sch40.It Includes Taking Measurements From Site, In Corporating The New Inputs From E-I-C, Preparation & Approval Of Pipe Spool And As-Build Drawings, Detergent Washing, Rinsing, Marking, Cutting & Bending Of Pipes, Fitting Of Different Types Of Pipe Fittings,Alignment, Providing Support With Proper Slope,Complete Erection Of Pipings As Per Approved Spool Drawings And Tender Technical Specifications(Tts).Ss304l Pipes And Pipe Fittings Shall Be Issued As Free Issue Material(Fim) , Welding(Gtaw) Of Ss 304L Piping.It Includes Butt/Fillet Welding Of Pipe To Pipe, Pipe To Header, Pipe To Flanges,Pipe To Fittings, Pipe To Socket End Of Valves,Pipe To Blind Plugs, Plate To Plate, Edge Preparation, Fit-Up, Shielding & Back Purging With High Purity(99.995% Minimum) Argon Gas Along With 100% Liquid Penetrant Examination(Lpe) At Root & Final Passes As Per Tender Technial Specifications. Pipe Sizes Which Will Be Welded, Will Vary From 08 Nb,Sch40 To 100 Nb, Sch40. , Welding(Gtaw) Of Ss 304L Piping(Inside Process Cell In Radioactive Area).It Includes Butt/Fillet Welding Of Pipe To Pipe, Pipe To Header, Pipe To Flanges,Pipe To Fittings, Pipe To Socket End Of Valves,Pipe To Blind Plugs, Plate To Plate, Edge Preparation, Fit-Up, Shielding & Back Purging With High Purity(99.995% Minimum) Argon Gas Along With 100% Liquid Penetrant Examination(Lpe) At Root & Final Passes As Per Tender Technical Specifications. Pipe Sizes Which Will Be Welded, Will Vary From 08 Nb,Sch40 To 100 Nb, Sch40. This Work Will Be Carried Out, Inside Process Cell Under A Special Work Permit (Swp), In Compliance With The Applicable Radiological Protection. , Radiographic Examination Of 100 % Butt Weld Pipe Joints(Inside Process Cell In Radioactive Area) As Per Approved Procedure And Tender Technical Specification. This Includes Supply Of Required Quality & Sizes Of Radiography Films, Identification Of Joints As Per The Weld Joint List, Taking Of Gamma Exposer, Development Of The Exposed Films And Its Internal Review.Pipe Weld Joint Sizes Which Will Be Radographed Will Vary From 08Mm Nb,Sch40 To 25Nb,Sch40.This Work Will Be Carried Out, Inside Process Cell Under A Special Work Permit (Swp), In Compliance With The Applicable Radiological Protection. , Supply, Fabrication, Installation And Painting Of Ms Structures As Per Site Conditions And Tender Technical Specifications.

BOQ

Sl. No. Item TitleItem Description
1Erection of SS304L piping in sizes from 8 NB,Sch40 to 100NB,Sch40.It includes taking measurements from site, in corporating the new inputs from E-I-C, preparation & approval of pipe spool and as-build drawings, detergent washing, rinsing, marking, cutting & bending of pipes, fitting of different types of pipe fittings,alignment, providing support with proper slope,complete erection of pipings as per approved spool drawings and Tender Technical Specifications(TTS).SS304L pipes and pipe fittings shall be issued as Free Issue Material(FIM)Erection of SS304L piping in sizes from 8 NB,Sch40 to 100NB,Sch40.It includes taking measurements from site, in corporating the new inputs from E-I-C, preparation & approval of pipe spool and as-build drawings, detergent washing, rinsing, marking, cutting & bending of pipes, fitting of different types of pipe fittings,alignment, providing support with proper slope,complete erection of pipings as per approved spool drawings and Tender Technical Specifications(TTS).SS304L pipes and pipe fittings shall be issued as Free Issue Material(FIM)
2Welding(GTAW) of SS 304L piping.It includes butt/fillet welding of pipe to pipe, pipe to header, pipe to flanges,pipe to fittings, pipe to socket end of valves,pipe to blind plugs, plate to plate, edge preparation, fit-up, shielding & back purging with high purity(99.995% minimum) Argon gas along with 100% Liquid Penetrant Examination(LPE) at root & final passes as per Tender Technial Specifications. Pipe sizes which will be welded, will vary from 08 NB,Sch40 to 100 NB, Sch40.Welding(GTAW) of SS 304L piping.It includes butt/fillet welding of pipe to pipe, pipe to header, pipe to flanges,pipe to fittings, pipe to socket end of valves,pipe to blind plugs, plate to plate, edge preparation, fit-up, shielding & back purging with high purity(99.995% minimum) Argon gas along with 100% Liquid Penetrant Examination(LPE) at root & final passes as per Tender Technial Specifications. Pipe sizes which will be welded, will vary from 08 NB,Sch40 to 100 NB, Sch40.
3Welding(GTAW) of SS 304L piping(Inside Process Cell in radioactive area).It includes butt/fillet welding of pipe to pipe, pipe to header, pipe to flanges,pipe to fittings, pipe to socket end of valves,pipe to blind plugs, plate to plate, edge preparation, fit-up, shielding & back purging with high purity(99.995% minimum) Argon gas along with 100% Liquid Penetrant Examination(LPE) at root & final passes as per Tender Technical Specifications. Pipe sizes which will be welded, will vary from 08 NB,Sch40 to 100 NB, Sch40. This work will be carried out, inside Process Cell under a Special Work Permit (SWP), in compliance with the applicable radiological protection.Welding(GTAW) of SS 304L piping(Inside Process Cell in radioactive area).It includes butt/fillet welding of pipe to pipe, pipe to header, pipe to flanges,pipe to fittings, pipe to socket end of valves,pipe to blind plugs, plate to plate, edge preparation, fit-up, shielding & back purging with high purity(99.995% minimum) Argon gas along with 100% Liquid Penetrant Examination(LPE) at root & final passes as per Tender Technical Specifications. Pipe sizes which will be welded, will vary from 08 NB,Sch40 to 100 NB, Sch40. This work will be carried out, inside Process Cell under a Special Work Permit (SWP), in compliance with the applicable radiological protection.
4Radiographic examination of 100 % butt weld pipe joints(Inside Process Cell in radioactive area) as per approved procedure and Tender Technical Specification. This includes supply of required quality & sizes of radiography films, identification of joints as per the weld joint list, taking of gamma exposer, development of the exposed films and its internal review.Pipe weld joint sizes which will be radographed will vary from 08mm NB,Sch40 to 25NB,Sch40.This work will be carried out, inside Process Cell under a Special Work Permit (SWP), in compliance with the applicable radiological protection.Radiographic examination of 100 % butt weld pipe joints(Inside Process Cell in radioactive area) as per approved procedure and Tender Technical Specification. This includes supply of required quality & sizes of radiography films, identification of joints as per the weld joint list, taking of gamma exposer, development of the exposed films and its internal review.Pipe weld joint sizes which will be radographed will vary from 08mm NB,Sch40 to 25NB,Sch40.This work will be carried out, inside Process Cell under a Special Work Permit (SWP), in compliance with the applicable radiological protection.
5Supply, fabrication, installation and painting of MS structures as per site conditions and Tender Technical Specifications.Supply, fabrication, installation and painting of MS structures as per site conditions and Tender Technical Specifications.

AI Tender Summary

OUR REF NO 58437310
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 12.98 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Bhabha Atomic Research Centre
Work Description Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Industry Unit; Pipelines; Consumables Provided By Service Provider Other Than Fim - Erection Of Ss304l Piping In Sizes From 8 Nb,Sch40 To 100Nb,Sch40.It Includes Taking Measurements From Site, In Corporating The New Inputs From E-I-C, Preparation & Approval Of Pipe Spool And As-Build Drawings, Detergent Washing, Rinsing, Marking, Cutting & Bending Of Pipes, Fitting Of Different Types Of Pipe Fittings,Alignment, Providing Support With Proper Slope,Complete Erection Of Pipings As Per Approved Spool Drawings And Tender Technical Specifications(Tts).Ss304l Pipes And Pipe Fittings Shall Be Issued As Free Issue Material(Fim) , Welding(Gtaw) Of Ss 304L Piping.It Includes Butt/Fillet Welding Of Pipe To Pipe, Pipe To Header, Pipe To Flanges,Pipe To Fittings, Pipe To Socket End Of Valves,Pipe To Blind Plugs, Plate To Plate, Edge Preparation, Fit-Up, Shielding & Back Purging With High Purity(99.995% Minimum) Argon Gas Along With 100% Liquid Penetrant Examination(Lpe) At Root & Final Passes As Per Tender Technial Specifications. Pipe Sizes Which Will Be Welded, Will Vary From 08 Nb,Sch40 To 100 Nb, Sch40. , Welding(Gtaw) Of Ss 304L Piping(Inside Process Cell In Radioactive Area).It Includes Butt/Fillet Welding Of Pipe To Pipe, Pipe To Header, Pipe To Flanges,Pipe To Fittings, Pipe To Socket End Of Valves,Pipe To Blind Plugs, Plate To Plate, Edge Preparation, Fit-Up, Shielding & Back Purging With High Purity(99.995% Minimum) Argon Gas Along With 100% Liquid Penetrant Examination(Lpe) At Root & Final Passes As Per Tender Technical Specifications. Pipe Sizes Which Will Be Welded, Will Vary From 08 Nb,Sch40 To 100 Nb, Sch40. This Work Will Be Carried Out, Inside Process Cell Under A Special Work Permit (Swp), In Compliance With The Applicable Radiological Protection. , Radiographic Examination Of 100 % Butt Weld Pipe Joints(Inside Process Cell In Radioactive Area) As Per Approved Procedure And Tender Technical Specification. This Includes Supply Of Required Quality & Sizes Of Radiography Films, Identification Of Joints As Per The Weld Joint List, Taking Of Gamma Exposer, Development Of The Exposed Films And Its Internal Review.Pipe Weld Joint Sizes Which Will Be Radographed Will Vary From 08Mm Nb,Sch40 To 25Nb,Sch40.This Work Will Be Carried Out, Inside Process Cell Under A Special Work Permit (Swp), In Compliance With The Applicable Radiological Protection. , Supply, Fabrication, Installation And Painting Of Ms Structures As Per Site Conditions And Tender Technical Specifications.
Basic Detail
Tender No GEM/2026/B/8251079
Bidding Type Tender
Location
City Mumbai Suburban
State Maharashtra
Key Dates
Publish Date 07 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 12.98 Lakhs
Tender Fee Ref. Documents
EMD 25965
Exemption Available
Document List
5806f7a8-4cd6-4030-9033-ce53143c4fd1.pdf
1793962906.xlsx
1794069590.pdf
1794069597.pdf
1794069645.pdf
1794069653.pdf
ATCandEMD_4105dbd2-a264-4bce-89e51794071179799_ArunBARC.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
pdf

5806f7a8-4cd6-4030-9033-ce53143c4fd1.pdf

xlsx

1793962906.xlsx

pdf

1794069590.pdf

pdf

1794069597.pdf

pdf

1794069645.pdf

pdf

1794069653.pdf

pdf

ATCandEMD_4105dbd2-a264-4bce-89e51794071179799_ArunBARC.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender