Power Government Departments Closing in 4 days TDR #58436496

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - The Work Construction Of 11 Kv Lt Line And Other Associate Work Under Full Deposite Scheme At Various Place In Edd Sadabad Hathras; Electrical Syste

Issued by Government Departments · Hathras, Uttar Pradesh
Tender Value
10 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hathras → Uttar Pradesh
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - The Work Construction Of 11 Kv Lt Line And Other Associate Work Under Full Deposite Scheme At Various Place In Edd Sadabad Hathras; Electrical System Or Installation; Na - Safe Carriage Of Following Material From Electricty Store Center Hts To Pit Site Of Work Through The Kacha And Pakka Road Including Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Etc. Which Required For Proper Completion Of Work.(Distance 00-50 Kms.) , 8.5/9 Mtr. Long Pcc Poles. , 11 Mtr. Long Pcc Poles. , 9/11 Mtr. S.T. Poles , Acsr Weasel Conductor , Acsr Dog Conductor , Earthing Complete , Stay Set Complete , Teoff Channel , 33/11 Kv Pin Insulator With Pin , Disc Insulator With Disc Fitting , F Bracket , 11 Kv X-Arm , 16/25/50/95/120 Sqmm. Ab Cable , Eye Hook , Suspension Clamp , Ms Angle , Top Channel , Diff Type Clamps (Cross Arm/Holding/D.P./Stay Clamp/ Dist. Box Clamp) , Dropper Channel , Dead End Clamp , Distribution Box , Guarding Angle With Clamp , G.I Wire 6/8/10 Swg , 11 Kv Xlpe Cable , 10 Kva Tf, 16 Kva Tf, 25 Kva T/F, 63 Kva T/F, 100 Kva T/F , 250 Kva T/F, 400 Kva T/F , Errection Of Following Poles Including Cutting Of Kharanja/Mettalic Road/Concrete Portion While Digging Pit & Complete H.T./L.T. Fittings As Per Respo Manual And As Per Direction Of Engineer Incharge Including The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. , Pcc Poles 8.5/9/11 Mtr. , Pcc Poles 11 Mtr. , Stp 9.0/11 Mtr. , Fixing Of Following Material As Per Respo Manual , Teoff Channel , 33/11 Kv Pin Insulator With Pin , Disc Insulator With Disc Fitting , F Bracket , 11 Kv X-Arm , Eye Hook , Suspension Clamp , Ms Angle , Top Channel , Diff Type Clamps (Cross Arm/Holding/D.P./Stay Clamp/ Dist. Box Clamp) , Dropper Channel , Dead End Clamp , Distribution Box , Guarding Angle With Clamp , Errection And Grouting Of Stays As Per Respo Norms And As Per Direction Of Supervising Engineer. Grouting Material I.E. Cement, Sand, Brick Ballast/Stone Ballast Etc. Shall Be Arranged By The Contractor At His Own Cost. , Fixing Of Earthing Rod As Per Respo Norms And As Per Direction Of Supervising Engineer. , Shifting Of Distribution T/Fs From Site To Another Site And Safe Installation Of Following New/Repaired Cousted T/F On Newly Constructed Double Pole In Proper Alignment Direction & Making All Ht/Lt Connection. , 10 Kva Tf, 16 Kva Tf, 25 Kva T/F, 63 Kva T/F, 100 Kva T/F , Installation And Shifting Of 250 Kva T/F, 400 Kva T/F. , Laying, Sagging And Stringing And Jumpering / Binding Etc. Of New & Old Acsr Weasal Conductor / Gi In 11 Kv / Lt Lines As Per Respo Manual And As Per Direction Of Supervising Engineer. , Acsr Weasal Conductor , Acsr Dog Conductor , 16/25/50/95/120 Sqmm. Ab Cable , Xlpe Cable , Providing & Fixing Of Following Material , Nut,Bolt & Washer , Cable Jointing Kit , Cutting, Chopping, Triming Of Tree Branches To Clear The Line Route To Give 2 Mtr. Horizontal And Vertical Clearance To The Line Coming In The Route Of Different Feeders As Per Direction Of Supervising Engineer , Guarding/Reguarding Of 11 Kv Line By Laying, Stringing, Sagging And Binding Of 2 Nos. Parallel Gi Wire 6 Swg After Providing, Fabrication And Fixing Of Guarding Angle And Fabrication And Fixing Of X-Guards (Tillis) Of Gi Wire At Distance Of 3 Mtr. , Construction Of Plinth Of Size 5*5*4 Above Ground Level One Ft Below The 11 Ground Level Of 9 After Exavation Of 4 Earth Brick Ballast Shall Be Provided And Rammering Will Be Done Properly After Ballast Shall Be Provided And Rammering Will Be Done Properly After That A Retaining Wall 9Width By Fist Class Brick In Ratio 1:4 Of Cement & Sand Shall Bemade. The Earth Shall Be Filled Up To One Ft.Below The Top Of The Plinth After This Brick Ballast Shall Be Provided Upto 6From The Earth Level And Proper Rammering Shall Be Done One No. Jall Of 12 Mm Ms Tor Shall Be Fixed In The Hollow Of Plinth And One Ii. Thick Rcc In Ratio Of Cement Sand & Stone Ballast Shall Be Laid On The Top Of The Plinth. The 12 Mm Thick Plastering Shall Be Done All Round The Plinth In 1:4 Ratio Of Cement And Sand. , Net Fencing Shall Be 1150 1200 Mm Made Of 35X35 Mm Ms Angle Covered By Expended Netal 14 Swg Up To Full Height 1200 Mm Duly Steftened By Ms Flat By An 8 Swg Dia Bolt & Nut. , Chemical Earthing Of 400/250 Kva Medium Powertransformers , Installation Of Extra T On The Erected Poles Wherever Required Alongwith All Fitting As Per Direction Of Supervising Engineer Including The Cost Of Labour, T&P Etc, Required For Proper Completion Of Work. The T Pole Shall Be Grouted With Cement, Sand And Brick Ballast/Stone Ballast In Ratio 1:4:8 Including The Cost Of Material. , Installation Of 11 Kv Tpmo , Dismentlling And Removal Of Existing Line From The Various Area. (Areal Bunch Conductor, Dog Conductor & Areal Weasel Conductor) , Dismentlling Of Pole Stp/Pcc , Back Cartage , Acsr Weasel Conductor Scrap , Iron Scrap

BOQ

Sl. No. Item TitleItem Description
1Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)
28.5/9 Mtr. long PCC Poles.8.5/9 Mtr. long PCC Poles.
311 Mtr. long PCC Poles.11 Mtr. long PCC Poles.
49/11 Mtr. S.T. Poles9/11 Mtr. S.T. Poles
5ACSR Weasel conductorACSR Weasel conductor
6ACSR Dog conductorACSR Dog conductor
7Earthing CompleteEarthing Complete
8Stay Set CompleteStay Set Complete
9Teoff ChannelTeoff Channel
1033/11 KV Pin Insulator with Pin33/11 KV Pin Insulator with Pin
11Disc Insulator with Disc FittingDisc Insulator with Disc Fitting
12F BracketF Bracket
1311 KV X-Arm11 KV X-Arm
1416/25/50/95/120 sqmm. AB Cable16/25/50/95/120 sqmm. AB Cable
15Eye HookEye Hook
16Suspension ClampSuspension Clamp
17MS AngleMS Angle
18Top ChannelTop Channel
19Diff Type Clamps (Cross arm/Holding/D.P./Stay Clamp/ Dist. Box Clamp)Diff Type Clamps (Cross arm/Holding/D.P./Stay Clamp/ Dist. Box Clamp)
20Dropper ChannelDropper Channel
21Dead End ClampDead End Clamp
22Distribution BoxDistribution Box
23Guarding Angle with ClampGuarding Angle with Clamp
24G.I Wire 6/8/10 SWGG.I Wire 6/8/10 SWG
2511 KV XLPE cable11 KV XLPE cable
2610 KVA TF, 16 KVA TF, 25 KVA T/F, 63 KVA T/F, 100 KVA T/F10 KVA TF, 16 KVA TF, 25 KVA T/F, 63 KVA T/F, 100 KVA T/F
27250 KVA T/F, 400 KVA T/F250 KVA T/F, 400 KVA T/F
28Errection of following Poles including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.Errection of following Poles including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.
29PCC poles 8.5/9/11 Mtr.PCC poles 8.5/9/11 Mtr.
30PCC poles 11 Mtr.PCC poles 11 Mtr.
31STP 9.0/11 Mtr.STP 9.0/11 Mtr.
32Fixing of following Material as per RESPO manualFixing of following Material as per RESPO manual
33Teoff ChannelTeoff Channel
3433/11 KV Pin Insulator with Pin33/11 KV Pin Insulator with Pin
35Disc Insulator with Disc FittingDisc Insulator with Disc Fitting
36F BracketF Bracket
3711 KV X-Arm11 KV X-Arm
38Eye HookEye Hook
39Suspension ClampSuspension Clamp
40MS AngleMS Angle
41Top ChannelTop Channel
42Diff Type Clamps (Cross Arm/Holding/D.P./Stay Clamp/ Dist. Box Clamp)Diff Type Clamps (Cross Arm/Holding/D.P./Stay Clamp/ Dist. Box Clamp)
43Dropper ChannelDropper Channel
44Dead End ClampDead End Clamp
45Distribution BoxDistribution Box
46Guarding Angle with ClampGuarding Angle with Clamp
47Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.
48Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.
49Shifting of Distribution T/Fs from site to another site and Safe Installation of following New/Repaired cousted T/F on newly constructed double pole in proper alignment direction & making all HT/LT connection.Shifting of Distribution T/Fs from site to another site and Safe Installation of following New/Repaired cousted T/F on newly constructed double pole in proper alignment direction & making all HT/LT connection.
5010 KVA TF, 16 KVA TF, 25 KVA T/F, 63 KVA T/F, 100 KVA T/F10 KVA TF, 16 KVA TF, 25 KVA T/F, 63 KVA T/F, 100 KVA T/F
51Installation and Shifting of 250 KVA T/F, 400 KVA T/F.Installation and Shifting of 250 KVA T/F, 400 KVA T/F.
52Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.
53ACSR Weasal conductorACSR Weasal conductor
54ACSR Dog conductorACSR Dog conductor
5516/25/50/95/120 sqmm. AB Cable16/25/50/95/120 sqmm. AB Cable
56XLPE CableXLPE Cable
57Providing & Fixing of Following MaterialProviding & Fixing of Following Material
58Nut,bolt & WasherNut,bolt & Washer
59Cable Jointing KitCable Jointing Kit
60Cutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineerCutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineer
61Guarding/Reguarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr.Guarding/Reguarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr.
62Construction of plinth of size 5*5*4' above ground level one ft below the 11 ground level of 9\\" After Exavation of 4 \\"earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9\\"width by fist class brick in ratio 1:4 of cement & sand shall bemade. The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6\\"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one II. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.Construction of plinth of size 5*5*4' above ground level one ft below the 11 ground level of 9\\" After Exavation of 4 \\"earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9\\"width by fist class brick in ratio 1:4 of cement & sand shall bemade. The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6\\"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one II. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.
63Net Fencing Shall be 1150 1200 mm made of 35x35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut.Net Fencing Shall be 1150 1200 mm made of 35x35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut.
64Chemical earthing of 400/250 KVA medium PowerTransformersChemical earthing of 400/250 KVA medium PowerTransformers
65Installation of extra ''T'' on the erected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, T&P etc, required for proper completion of work. The \\"T\\" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material.Installation of extra ''T'' on the erected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, T&P etc, required for proper completion of work. The \\"T\\" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material.
66Installation of 11 KV TPMOInstallation of 11 KV TPMO
67Dismentlling and removal of existing Line from the various area. (Areal Bunch Conductor, Dog Conductor & Areal Weasel Conductor)Dismentlling and removal of existing Line from the various area. (Areal Bunch Conductor, Dog Conductor & Areal Weasel Conductor)
68Dismentlling Of Pole STP/PCCDismentlling Of Pole STP/PCC
69Back CartageBack Cartage
70ACSR Weasel Conductor ScrapACSR Weasel Conductor Scrap
71Iron ScrapIron Scrap

AI Tender Summary

OUR REF NO 58436496
AUTHORITY Government Departments
TENDER VALUE 10 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Uttar Pradesh Power Corporation Limited
Work Description Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - The Work Construction Of 11 Kv Lt Line And Other Associate Work Under Full Deposite Scheme At Various Place In Edd Sadabad Hathras; Electrical System Or Installation; Na - Safe Carriage Of Following Material From Electricty Store Center Hts To Pit Site Of Work Through The Kacha And Pakka Road Including Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Etc. Which Required For Proper Completion Of Work.(Distance 00-50 Kms.) , 8.5/9 Mtr. Long Pcc Poles. , 11 Mtr. Long Pcc Poles. , 9/11 Mtr. S.T. Poles , Acsr Weasel Conductor , Acsr Dog Conductor , Earthing Complete , Stay Set Complete , Teoff Channel , 33/11 Kv Pin Insulator With Pin , Disc Insulator With Disc Fitting , F Bracket , 11 Kv X-Arm , 16/25/50/95/120 Sqmm. Ab Cable , Eye Hook , Suspension Clamp , Ms Angle , Top Channel , Diff Type Clamps (Cross Arm/Holding/D.P./Stay Clamp/ Dist. Box Clamp) , Dropper Channel , Dead End Clamp , Distribution Box , Guarding Angle With Clamp , G.I Wire 6/8/10 Swg , 11 Kv Xlpe Cable , 10 Kva Tf, 16 Kva Tf, 25 Kva T/F, 63 Kva T/F, 100 Kva T/F , 250 Kva T/F, 400 Kva T/F , Errection Of Following Poles Including Cutting Of Kharanja/Mettalic Road/Concrete Portion While Digging Pit & Complete H.T./L.T. Fittings As Per Respo Manual And As Per Direction Of Engineer Incharge Including The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. , Pcc Poles 8.5/9/11 Mtr. , Pcc Poles 11 Mtr. , Stp 9.0/11 Mtr. , Fixing Of Following Material As Per Respo Manual , Teoff Channel , 33/11 Kv Pin Insulator With Pin , Disc Insulator With Disc Fitting , F Bracket , 11 Kv X-Arm , Eye Hook , Suspension Clamp , Ms Angle , Top Channel , Diff Type Clamps (Cross Arm/Holding/D.P./Stay Clamp/ Dist. Box Clamp) , Dropper Channel , Dead End Clamp , Distribution Box , Guarding Angle With Clamp , Errection And Grouting Of Stays As Per Respo Norms And As Per Direction Of Supervising Engineer. Grouting Material I.E. Cement, Sand, Brick Ballast/Stone Ballast Etc. Shall Be Arranged By The Contractor At His Own Cost. , Fixing Of Earthing Rod As Per Respo Norms And As Per Direction Of Supervising Engineer. , Shifting Of Distribution T/Fs From Site To Another Site And Safe Installation Of Following New/Repaired Cousted T/F On Newly Constructed Double Pole In Proper Alignment Direction & Making All Ht/Lt Connection. , 10 Kva Tf, 16 Kva Tf, 25 Kva T/F, 63 Kva T/F, 100 Kva T/F , Installation And Shifting Of 250 Kva T/F, 400 Kva T/F. , Laying, Sagging And Stringing And Jumpering / Binding Etc. Of New & Old Acsr Weasal Conductor / Gi In 11 Kv / Lt Lines As Per Respo Manual And As Per Direction Of Supervising Engineer. , Acsr Weasal Conductor , Acsr Dog Conductor , 16/25/50/95/120 Sqmm. Ab Cable , Xlpe Cable , Providing & Fixing Of Following Material , Nut,Bolt & Washer , Cable Jointing Kit , Cutting, Chopping, Triming Of Tree Branches To Clear The Line Route To Give 2 Mtr. Horizontal And Vertical Clearance To The Line Coming In The Route Of Different Feeders As Per Direction Of Supervising Engineer , Guarding/Reguarding Of 11 Kv Line By Laying, Stringing, Sagging And Binding Of 2 Nos. Parallel Gi Wire 6 Swg After Providing, Fabrication And Fixing Of Guarding Angle And Fabrication And Fixing Of X-Guards (Tillis) Of Gi Wire At Distance Of 3 Mtr. , Construction Of Plinth Of Size 5*5*4 Above Ground Level One Ft Below The 11 Ground Level Of 9 After Exavation Of 4 Earth Brick Ballast Shall Be Provided And Rammering Will Be Done Properly After Ballast Shall Be Provided And Rammering Will Be Done Properly After That A Retaining Wall 9Width By Fist Class Brick In Ratio 1:4 Of Cement & Sand Shall Bemade. The Earth Shall Be Filled Up To One Ft.Below The Top Of The Plinth After This Brick Ballast Shall Be Provided Upto 6From The Earth Level And Proper Rammering Shall Be Done One No. Jall Of 12 Mm Ms Tor Shall Be Fixed In The Hollow Of Plinth And One Ii. Thick Rcc In Ratio Of Cement Sand & Stone Ballast Shall Be Laid On The Top Of The Plinth. The 12 Mm Thick Plastering Shall Be Done All Round The Plinth In 1:4 Ratio Of Cement And Sand. , Net Fencing Shall Be 1150 1200 Mm Made Of 35X35 Mm Ms Angle Covered By Expended Netal 14 Swg Up To Full Height 1200 Mm Duly Steftened By Ms Flat By An 8 Swg Dia Bolt & Nut. , Chemical Earthing Of 400/250 Kva Medium Powertransformers , Installation Of Extra T On The Erected Poles Wherever Required Alongwith All Fitting As Per Direction Of Supervising Engineer Including The Cost Of Labour, T&P Etc, Required For Proper Completion Of Work. The T Pole Shall Be Grouted With Cement, Sand And Brick Ballast/Stone Ballast In Ratio 1:4:8 Including The Cost Of Material. , Installation Of 11 Kv Tpmo , Dismentlling And Removal Of Existing Line From The Various Area. (Areal Bunch Conductor, Dog Conductor & Areal Weasel Conductor) , Dismentlling Of Pole Stp/Pcc , Back Cartage , Acsr Weasel Conductor Scrap , Iron Scrap
Basic Detail
Tender No GEM/2026/B/8249808
Bidding Type Tender
Location
City Hathras
State Uttar Pradesh
Key Dates
Publish Date 07 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 10 Lakhs
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
0ba95d96-ee3f-4ef0-9fb0-63ea45d77255.pdf
1793952567.xlsx
1793952598.pdf
1793952602.pdf
ATC65PDF_240a7bae-432a-42c8-bc9e1793952725311_EDCHATHRASBUYER.pdf
ATC65PDF_b395223b-ce83-4133-bbb51793952736885_EDCHATHRASBUYER.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
pdf

0ba95d96-ee3f-4ef0-9fb0-63ea45d77255.pdf

xlsx

1793952567.xlsx

pdf

1793952598.pdf

pdf

1793952602.pdf

pdf

ATC65PDF_240a7bae-432a-42c8-bc9e1793952725311_EDCHATHRASBUYER.pdf

pdf

ATC65PDF_b395223b-ce83-4133-bbb51793952736885_EDCHATHRASBUYER.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender