Tender For General-Jalanidhi Sustainability Project 2026-2027 Ellumannam Water Supply Scheme In Edavaka Gramapanchayath -Repair And Maintenance Of Water Supply Scheme -General Civil Work
Tender Value
32.92 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
8 days left
EMD
50000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wayanad → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Jalanidhi Sustainability Project 2026-2027 Ellumannam Water Supply Scheme In Edavaka Gramapanchayath -Repair And Maintenance Of Water Supply Scheme -General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | ELLUMANNAM WSS |
| 2 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, includingtesting of joints:150 mm diameter pipe |
| 3 | 18.59.1Providing and fixing C.I double acting air valve of approved quality with bolts, nuts,rubber insertion etc. complete ( The tail pieces, tapers etc. if required will be paidseparately):50 mm dia |
| 4 | 18.70.2Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile IronPipes including testing of joints and including the cost of rubber gasket:150 mm diapipes |
| 5 | 18.71.2Providing and laying Double Flanged ( screwed / welded) Centrifugally (Spun) CastIron, Class B ( IS : 1536):150 mm dia C.I Double Flanged Pipe |
| 6 | 18.72.16Providing and laying S & S Centrifugally Cast (Spun) / Ductile Iron Pipesconforming to IS : 8329:150 mm dia Ductile Iron Class K - 9 Pipes |
| 7 | 18.83.4Labour for cutting C.I. pipe with steel saw.150 mm diameter C.I. pipe |
| 8 | 4.1.5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mmnominal size derived from natural sources) |
| 9 | 100.1.2Excavating trenches of required width for pipes, cables, etc., including excavation forsockets, and dressing of sides, ramming of bottoms, depth exceeding 1.5m but notexceeding 3m, including getting out the excavated soil, and then returning the soil asrequired, in layers not exceeding 20cm in depth, including consolidating eachdeposited layer by ramming, watering, etc., and disposing of surplus excavated soil asdirected, within a lead of 50m, in all kinds of soil. |
| 10 | 100.8.1Fencing one side of trenches, 1.50m height with two rows of 10cm plastic cautiontape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals. |
| 11 | 100.35.2Testing 150mm DI/CI pipeline with potable water to the required test pressure150 mm diaObserved Data derived from item no.1018 of PHED DATA |
| 12 | 100.98.431Supply of CI Non Return Valve, Conforming to IS 5312 Part I - 1984, PN 1.0, Size150mm. |
| 13 | 18.68.1Providing and laying D.I specials of class K - 12 suitable for push - on jointing as perIS : 9523 :Upt 600 mm dia |
| 14 | 100.37.6.1In situ fabrication of M.S. pipes of size 150mm (I.D.) using 8mm thick M.S. plateincluding cost and conveyance charges of M.S. plate, all fabrication charges, chargesof painting the steel work with two or more coat deluxe multi surface paint to give aneven shade over an under-coat of primer etc., complete. |
| 15 | 100.37.6.2Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate includingcost and conveyance charges of M.S. plate, all fabrication charges, charges ofpainting the steel work with two or more coat deluxe multi surface paint to give aneven shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 16 | 100.37.6.3Cutting 150mm (I.D.) M.S. pipes for making bends and other specials by gas cuttingincluding cost of gas, all labour and hire charges of tools etc., complete: For pipesfabricated with 8mm thick M.S. plates. |
| 17 | 100.37.6.4Welding 150mm (I.D.) M.S. pipes for making bends and other specials by gas/electricwelding machine including cost of gas and welding rods, all labour and hire chargesof tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 18 | 100.37.6.5Grinding cut and weld edges of 150mm (I.D.) M.S. pipes during fabrication workincluding all labour and hire charges of tools etc., complete: For pipes fabricated with8mm thick M.S. plates. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender