Tender For 2- T-Junction/Y-Junction & Black Spot Repair At Behsuma Chadpur Thakurdwara Jaspur Road In Siau
Tender Value
17.85 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
4 days left
EMD
1.79 Lakhs
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bijnor → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 2- T-Junction/Y-Junction & Black Spot Repair At Behsuma Chadpur Thakurdwara Jaspur Road In Siau
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying Tack Coat with Bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with air compressor. Complete as per MORTH Specification Clause 503. (Including Royalty, labour cess but excluding GST) |
| 2 | Providing and laying dense graded bituminous macadam (grading-II) with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.50% by weight of total mix and filler, transporting the hot mix to work site, laying with a Mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specfication Clause 505 complete in all respects. (Including Royalty, labour cess but excluding GST) |
| 3 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @5.40 percent of mix and filler, transporting the hot mix to work site, laying with Mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction. As per Specfication Clause 509. (Including Royalty, labour cess but excluding GST) |
| 4 | Road marking with hot applied thermo plastic compound with reflectorising glass beads on bituminous surface. Providing and laying of Hot applied thermoplastic compound 2.5 mm thick including reflactorising glass beads @ 500 gm per Sqm area. Thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. As per S.I. No. MoRTH-803 (8.13). (Including labour cess but excluding GST) |
| 5 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-XI, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60)90 cm equilaterial triangle (Including labour cess but excluding GST) |
| 6 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-XI 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60)(60Cm Circular) Speed Limit Board (Including labour cess but excluding GST) |
| 7 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-XI 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60)(90 cm high octagonal) Stop Sign Board. (Including labour cess but excluding GST) |
| 8 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-XI, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60)(80x60 cm rectangular) Habitation Board. (Including labour cess but excluding GST) |
| 9 | Repeated BarRoad marking with hot applied thermo plastic compound with reflectorising glass beads on bituminous surface. Providing and laying of Hot applied thermoplastic compound 5 mm thick including reflactorising glass beads @ 500 gm per Sqm area. Thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. As per S.I. No. MoRTH-803 (8.13). (Including labour cess but excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender