Tender For 11Kv Indoor Vcb Panel Replacement Work At 110 Kv Substation Ernakulam North.
Tender Value
5.40 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
13 days left
EMD
13600
Bank guarantee accepted
Document Fee
1081
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 11Kv Indoor Vcb Panel Replacement Work At 110 Kv Substation Ernakulam North.
BOQ
| Sl. No. | Item Description |
| 1 | Unpacking at the place of storage and transporting 11KV indoor VCB switch gear panel and its accessories to the place of erection and erecting after fixing foundation bolts by chipping concrete wherever necessary, tightening, keeping lines and levels taking all safety precautions as per the direction of departmental officers. |
| 2 | Interconnection of panels and 11KV bus bars after opening covers, earthing, inter panel wiring, etc. and making ready for commissioning of breaker as per the direction of the departmental officers. |
| 3 | Dismantling the Interconnection of panels and 11KV bus bars after opening covers, earthing, inter panel wiring, etc. As per the direction ofthe departmental officers |
| 4 | Dismantling the existing 11KV indoor VCB switch gear panel and its accessories from the place of erection after removing foundation bolts by chipping concrete wherever necessary, after taking all safety precautions including dismantling potential transformers as per the direction of departmental officers.( 25% of erection charge) |
| 5 | Erection of 1 No. 11KV CT/PT/11KV NCT on the already erected structure after opening of crates at the place of storage leading to site carefully keeping at vertically not allowing tilting from vertical position more than the specified angles, keeping lines and levels as per the direction of the departmental officers. (cost index(e) : 1.3132 included in Rate) |
| 6 | Dismantling of 1 No. 11kV CT/PT/ 11kV NCT from the already erected structure of above 1.5m height , leading to storage place carefully keeping at vertically not allowing tilting from vertical position more than the specified angles, keeping lines and levels as per the direction of the departmental officers, including all labour charges, hire charges of tools & tackles etc. (cost index(e) : 1.3132 included in Rate) |
| 7 | Mounting one 3x300 mm2 XLPE out door/ indoor cable termination to the structures/ panel very carefully without causing any damaged to the Busbars including drilling of holes wherever necessary and insulating properly with HT Tape, complete as directed by the departmental officers |
| 8 | Mounting one 1x500 mm2 XLPE out door/ indoor cable termination to the structures/ panel very carefully without causing any damaged to the Busbars including drilling of holes wherever necessary and insulating properly with HT Tape, complete as directed by the departmental officers |
| 9 | Dismantling carefully 3x 300mm² indoor cable termination from the existing panel and kept carefully without damaging end for reconnection on new panel |
| 10 | Dismantling carefully 1x500mm² indoor cable termination from the existing panel and kept carefully without damaging end for reconnection on new panel |
| 11 | Termination of cables in panel by using deptly supplied cable glands of fixing the cable rigidly by any means as per direction of departmental staff at site charges include for providing necessary suitable hole in the gland plate etc. |
| 12 | Doing termination of all sizes of PVC insulated copper control cable 2.5 mm², pealing, providing number and letter ferrules in the wire, stripping ends, crimping with suitable lugs and connecting to the terminals in the panel board and marshalling kiosk etc., neatly and carefully including cost of copper sockets and ferrules as per the direction of Departmental Officers at site. |
| 13 | Doing out door/indoor cable termination of 3x300 mm² 11KV XLPE cable very carefully observing directions of manufactures and departmental staff including crimping of socket |
| 14 | Doing out door/indoor cable termination of 1x500 mm2 11KV XLPE cable very carefully observing directions of manufactures and departmental staff including crimping of socket |
| 15 | Uncoiling 5/4/3/2 core 4sqmm control cable(armoured or unarmoured) from cable drums and laying through trench/pipe/cable tray neatly and carefully including for providing loops wherever necessary and cable marker at both ends of cable as per direction of departmental staff at site. |
| 16 | Uncoiling 4/2 core 2.5sqmm control cable (armored or unarmored) from cable drums and cutting to required length and laying through trench/pipe/cable tray neatly and carefully including for providing loops wherever necessary and cable marker at both ends of cable as per direction of departmental staff at site. |
| 17 | Uncoiling 12/7/6 core 2.5 sq mm control cable (armoured and unarmoured) from cable drums and cutting to required length and laying through trench/pipe/cable tray grouping the same neatly using cable tie and carefully including for providing loops wherever necessary and cable marker, at both ends of cable as per direction of departmental staff at site. |
| 18 | Dismantling of cables in panel after disconnecting terminals, removing cable glands, of all sizes as per the direction of all departmental staff atsite. |
| 19 | Welding one end of the bended GI strip of size 50x6mm with the Structure with a welding length 50mm and 6mm thickness on both sides & end of the strip and connecting other end with nuts & bolts if required as per the directions of the department officers. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes(No.E7018) cost of anti corrosive paint etc. complete. |
| 20 | Laying of departmentally supplied GI Strip / Copper Strip of suitable size including cleaning and neatly bending of strips, cutting , removing of metal / earth in the yard and burrying earth strip to the required depth redoing the yard metalling as per the direction of the departmentalofficers. |
| 21 | Levelling, Cutting and fixing in position departmentally supplied MS Chequered plate 6 mm, 10 mm or 12mm thick in suitable length and width including providing lifting legs and suitable holes for lifting including grinding sides and corners etc. complete. |
| 22 | Levelling, Cutting and fixing in position departmentally supplied MS Chequered plate 6 mm, 10 mm or 12mm thick in suitable length and width including providing lifting legs and suitable holes for lifting including grinding sides and corners etc. complete. |
| 23 | Cutting holes up to 15*115cm in RCC floors and roofs for cable insertion |
| 24 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of nserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 25 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender