Tender For Complete Electrical Distribution Wiring Including Supplying And Fixing Of Tpn & Spn Dbs, Led Luminaries, Street Lights, Glow Signage Board, Ceiling/ Wall Fans At Sagar Sinchan Inspection Bungalow (A+ Category ), Gangasagar, Kakdwip Irrigat
Tender Value
42.58 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
8 days left
EMD
85172
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas South → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Complete Electrical Distribution Wiring Including Supplying And Fixing Of Tpn & Spn Dbs, Led Luminaries, Street Lights, Glow Signage Board, Ceiling/ Wall Fans At Sagar Sinchan Inspection Bungalow (A+ Category ), Gangasagar, Kakdwip Irrigation Division, Under The Jurisdiction Of Metropolitan Electrical Division.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.160 A TP&N |
| 2 | Supply Installation of Havells Kit-kat Rewireable (Porcelain Fuse carrier & Base) 320 A / 415 V, cat No : IHKKRN4320 |
| 3 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door |
| 4 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way (4 + 12), Double door |
| 5 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)12 way, Double door |
| 6 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.100 A, 30KA, FP MCCB |
| 7 | Supplying and fixing 40 A rating, 240/415 V, 10 kA, \\"C\\" curve, DP miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 8 | Supplying and fixing 40 A rating, 240/415 V, 10 kA, \\"C\\" curve, SP miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 9 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 10 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 11 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. |
| 12 | 4 Core 120 sq mm |
| 13 | 4 Core 35 sq mm |
| 14 | 4 Core 25 sq mm |
| 15 | 4 Core 16 sq mm |
| 16 | 2 Core 10 sq mm |
| 17 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. |
| 18 | Upto 35 sq. mm |
| 19 | Above 95 sq. mm and upto 185 sq. mm |
| 20 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 21 | 3½ X 120 sq. mm (45mm) |
| 22 | 4 X 35 sq. mm (32mm) |
| 23 | 4 X 25 sq. mm (28mm) |
| 24 | 4 X 16 sq. mm (28mm) |
| 25 | 2 X 10 sq. mm (19mm) |
| 26 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. |
| 27 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 28 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 29 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 30 | Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required. |
| 31 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. |
| 32 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 33 | SITC of GI Earthing spike of size 1833 MM x 20 mm including inserting at required depth and connection by supplying and fixing GI (Hot dip) strip 20mm x 3 mm thick from earth spike to pole (2.5 Mtr distance from earth spike connection point to pole) complete in all respect as per direction of the EIC. |
| 34 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.Group C |
| 35 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 36 | 6 Module (200mmX75mm) |
| 37 | 12 Module ( 200mm x 150mm) |
| 38 | 1 or 2 Module ( 75mm x 75mm ) |
| 39 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 40 | 5/6 amps switch |
| 41 | 15/16 A switch |
| 42 | 3 pin 5/6 A socket outlet |
| 43 | 6 pin 15/16 A socket outlet |
| 44 | Supplying of approved make high speed ceiling fan (ISI marked) of following sizes having double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250. |
| 45 | 900mm/ 1050mm/ 1200mm |
| 46 | Supplying of approved make wall fan oscillating type with base, blades, guard, speed regulator etc. AC 230- 250 volts. |
| 47 | 400mm sweep |
| 48 | Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable etc. as required. |
| 49 | Supplying of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250. |
| 50 | 225mm sweep RPM 900 / 1400 (9\\") |
| 51 | 300mm sweep RPM 900 / 1400 (12\\") |
| 52 | Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep |
| 53 | Supplying & fixing 4 module size GI box with modular plate and cover in front on surface or in recess including providing and fixing 11-18 A modular AC starter and 32A DP MCB, \\"C\\" Curve. along with 2 module board with 25A socket including connections, painting etc. as required. with 25A 3 Pin Plug top (For SAC Starter & Plug Point) |
| 54 | Supplying swaged and welded steel tubular pole of following specifications as per IS (2317: 1980)Item: 7m length, 85Kg, 410-SP-03 |
| 55 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Item: Above 6.5 Meter and upto 8.0 Meter |
| 56 | Providing and making steel pole collar with cement concrete (1 cement: 3 coarse sand: 6 stone aggregate 20mm) of specified size and shape including formwork, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted) 0.6 X 0.6 X 0.76 = 0.274 X 14 = 3.84 CUM |
| 57 | Supply and fixing of smart bright essential street light (70 Watt) complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.Make : Crompton, 72 watt |
| 58 | Supplying and Fixing Sintex made water proof looping cable box of the following sizes as indicated below, Comprising of 1 no 250 V, 6 A SP MCB unit, one NL on porcelain insulator incl. One(01) no 3 pole terminal connector etc. incl Internal Connection and housing the same above the muffing by suitable pole clamps etc complete. |
| 59 | Size of box : 140 x 140 x 95 GSJB |
| 60 | Size of box : 250 x 200 x 105 GSJB |
| 61 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.50 mm |
| 62 | Supply and installation of Polyvinylidene Fluoride coated Aluminium Composite Panel board (3mm) of Aludecor /Alstone size (as per drawing)to be made such a manner that it can be opened towards up direction for taking maintenance. |
| 63 | S&F of Acrylic letter scripted in English/Bengali. size and matter of letter as per approved drawing by EIC, front side of the letter to be made 6mm thick imported (White- 0.40) uv stabilized excellent to self display. Make- Acast, Mitsubishi, all letter will be raised minimum 2\\" to be fixed by special type of solution. ( total sqm of Each letter is to be measused based on its front surface area) |
| 64 | S & F LED lamp incl. best quality LED lighting arrangement to be fixed by proper arrangement with complete connection. (1 module contain 3 nos LED, 0.5 W Each) |
| 65 | S&F Water proof power supply system IP65, output volatge : 12V/24V DC, 50/60Hz frequency, 108 to 305 VAC power supply, >.95 power factor for LED lamp. (Make : Meanwell)300 Watt, Model ELG 300 |
| 66 | 26 Gauge Galvanized iron sheet for back panel with one coating of white paint, Make - Aarti / Bansal / Jindal |
| 67 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (35 X 35 X 5 mm ISA) |
| 68 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.200 mm X 250 mm X 75 mm deep |
| 69 | Supply and fixing of Town Glow Post Top IP66/IK10 Post Top lantern with symmetric Light distribution complete with all accessories to be fixed on suitable pole incl. bolts and nuts incl making drilled holes etc to fixing up the landscape lighting pole complete.Make : Bajaj, 45W LED NW |
| 70 | Supply TMC501 Conventional industrial batten Philips LEDtube, model no : TMC 501 P 1xT-LED 22W P3241 with 1no Mas LEDtube 1200mm 18W865 T8 I – 2100lm including necessary connection. |
| 71 | Supply TMC501 Conventional industrial batten Philips LEDtube, model no : TMC 501 P 2xT-LED 22W P3242 with 2nos Mas LEDtube 1200mm 18W865 T8 I – 2100lm including necessary connection. |
| 72 | Supply and fixing at wall LED Uplighter 9W Pressure Diecast Aluminium housing for efficient thermal management, polyester powder coated IP66 IK 07 Operating Voltage Range 140V to 270V Ac, LED Life : L70 50K i.e. 50000 burning Hr, LED Chip Efficacy 140 lum/watt CCT 3000K CRI≥ 80,Beam Angle 25 deg along with High Quality toughened glass, Power Factor ≥ 0.95 THD ≤ 10% Surge Protection 4KV other safety test as per IS 15885 Part 2/Sec 13 Ref Model : Havells - LYCUS 9W (LYCUSSPS9WLED730PSYMBOTG) |
| 73 | Supplying of different types of LED lamps (9W) Make : Philips, 9.0 Watt, Base B22/ E27, 825 Lm |
| 74 | SITC of Feeder Pillar panel box (IP 65) of dim : 2mm thk CRCA sheet of dimension : 825mm (H) x 500 mm (B) x 300 mm (D) double door with double coated powder paint with canopy type head having seperate space at back side for installation of supply authority meters (if reqd) with S & F of following materials including fixing the same in CC foundation of (1:3:6) as per enclosed drawing with base frame structure made by 25 x 25 x 5 mm thk MS angle, as per direction of EIC.Material Description :1. MCCB DU100H, 80-100A, Cat No : CM97933OOK2, Braking Cap : 30KA Make L & T with extended ROM rotary handle= 1 no2. 22.5 mm dia LED indicating lamps = 3 nos3. Fr 2, 4P Power Contactor, 63A, MCX 12, Cat No : CS97014, Make : L & T= 2 Nos4. FM1 / Quartz Daily, 240 VAC Base/DIN Mounting, Cat No : J648B1, Make : L & T = 2 NOs5. Multi Step Switches with OFF, 2 P 3W, Cat No : 61080, 32A, Make : L & T = 2 NOs6. Four Pole (FP) MCB 32A, C Curve, Cat No : BB40320C, make : L & T = 4 NosBUS BAR : 25 X 5 mm thk CU Busbar 400 MM (L) x 4 NosAll internal power connection to be made by 10 sq mm CU wire, control circuit wiring by 2.5 sq mm CU wire. |
| 75 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness |
| 76 | Supply installation testing and commissioning of following capacity geyser 5 star rated storage water heater with advanced 3 level safetyFor 10L-capacity Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender