Housing Urban and Rular Development Government Departments Closing in 3 days TDR #58432641

Tender For Construction Of Store Room With Chowkidar Shed At Rto Office At Leh.

Issued by Government Departments · Leh, Ladakh
Tender Value
60.14 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
605
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Store Room With Chowkidar Shed At Rto Office At Leh.

BOQ

Name of Work:- Construction of store room with chowkidar shed at RTO office at leh.
Sl. No. Item Description
1Earth work in excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.7.1 All kinds of soil
2Dry stone pitching (any thickness) inluding cost of stones. On Horizontal
3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
4Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand)
5Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
6Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50mm thick with 20 mm nominal size stone aggregate
7Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1: ½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
8Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominalsize)
9Steel reinforcement for R.C.C work Includng straightening, cutting , bending, placing, in position and binding all complete Thermo- Mechanically Treated bars of grade Fe-500D or more . (150kg/cum)
10Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms
11Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete
12Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.
13Stairs (excluding landings) except spiral staircases.
14Centering and shuttering including strutting, propping etc.and removal of form for:Columns, pillars, piers, abutments, posts and struts.
15Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class Kail wood
16Providing and fixing ISI marked flush door shutters 0f 35mm conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm thick including ISI marked stainless steel butt hinges with necessary screws.
17French spirit polishing , Two or more coats on new works including a coat of wood filler
18Providing and fixing factory made uPVC casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)
19Casement cum fixed panel window having both end single casement panel,middle fixed panels and at top completely fixed ventilator with S.S friction hinges(350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazingbead/double glazing bead of appropriate dimension. (Area of window above3.00 sqm upto 5.00 sqm).
20Providing and fixing DGU ( with < 0.25 SHGC nad > 0.35 VLT glazing in UPVC window , ventilator shutter and partition etc with proper sealing as per norms etc complete as per the architectural drawing and the directions of engineer in charged Toughened DGU glass panes of 5.0mm thickness SAINT GOBIN/ ASAHI INDIA GLASS / HINGIL MAKE as approved by engineer in charge ,
21Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc
22Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete.
23Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete
24Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
25Providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement, masonry up to floor five level including hoisting and setting in position in cement mortar 1:6 using approved quality mud with carriage of material complete
26Providing and fixing thermal insulation with Resin Bonded fibre glass wool conforming to IS: 8183, Density 24 Kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge.
2715mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix , 1 : 4 ( 1 cement : 4 fine sand)
28Providing and applying white cement based putty of avg thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
29Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.
30Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
31Providing and fixing 12mm thick pre-laminated flooring of approved brand as per direction of engineer in-charge , complete Job AC-4 including carriage
32Carriage of Material from source to site by M.T including loading, unloading and complete Job.Cement and steel an average leaad of 5 Kms
33Sand & Stone Aggregate an average lead of 20 Kms
34Stone an average lead of 20 Kms
35Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Makrana
36Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 5 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm.
37Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked. 80x1.25 mm M.S. laths with 1.25 mm thick top cover.
38Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area
39Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
40Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
41Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire
422x 10 Sq.mm + 1 x 6 Sq.mm earth wire
434x 10 Sq.mm + 2 x 6 Sq.mm earth wire
44Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. For inverter)1x 1.5 sq. mm
45Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required.5/6 A switch
463 pin 5/6 A socket outlet
47Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
48Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2No's 3 pin 5/6 amps modular socket outlet and 2No's 5/6 amps modular switch, connection etc. as required
49Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required.
50Supplying and fixing following way,triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 Way (4+18) Double Door
51Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 6/16 amp.
52Single pole and neutral 32 amp.
53Supplying and fixing of following rating 240/415 Volt's \\"C\\" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp.) SPN 63 Amp .
54TPN 63 Amp
55LED down lighter 12 watt including cutting of Holes.
56Providing and fixing ceramic glazed floor tiles 300x 300mm of ist quality conforming to IS :- 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, grey etc laid on 20mm thick bed of cement mortar 1:4 including pointing the joinys with cement and making pigment etc complete.
57Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 of min. thickness 5mm of approved brand like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour shades except bebundy bottle green, black of any size, joinning with grey cement slurry @3.3Kg per sqm incl. pointing in white cement mixed with pigment of matching shade complete.
58Providing and fixing water closet squatting pan ( indian type W.C. pan ) with 100 mm sand cast iron P or Strap, 10 litre low level P.V.C flushing cistern including flush pipe (of approved make)'' manually control ( led device ( handle lever ) conforming to IS: 7231 , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required . Long pan pattern white vitreous china W.C. Pan of size 580mm.
59Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers.
60Providingand fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
61Providing and fixing Stainless Steel AISI304(18/8) kitchen sink as per IS13983 with C.I.brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required: 610x460 mm bowl depth 200 mm
62Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape(1500x450) mm.
63Providing and fixing toilet paper holder : Vitreous china
64Providing and fixing PTMT Soap Dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106gms (C.P Brass) with brackets etc.
65Providing and fixing soil, waste and vent pipes(a) 100mm dia PVC
66(b) 75mm dia PVC
67Providing and fixing of plain bends of required degree.100 mm dia PVC
6875mm dia PVC
69Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings. This includes testing of joints complete as per direction of Engineer-in-charge. (Internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the walls etc.) PN-16 pipe 25 MM OD
70Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 UV Stabilized & anti-microbial fusion welded , ahaving thermal stability for hot & cold water supply including all PP-R plain & Brass threaded polypropylenee random fittings i/c trenching , refilling & testing of Joints complete as per direction of ENgiineer in charge . (External work) PN-16 pipe 32 MM OD
71PN-16 pipe 40 MM OD
72Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
73Providing and fixing ball valve for basin mixer and geyser point of appeoved quality as per direction of engineer in - charge. 15mm nominal bore
74Providing and placing on terrace (at all floor level) polyethylene water storage tank ISI:12701 marked with cover and suitable locking arrangment and making necessary holes for inlet, outlet and overflow pipes. the base support for tank i/c fittings & fixtures for tank shall be paid separately.
75Providing and fixing of material for the insulation of sintex with nitrile sheet , tapping with cello tape, Rock wool 6 inch per side, wire mesh, polythene , tapping with cello tape aluminium sheet 26 gauge cladding with dia of on contact basis.19mm thick nitrile sheet complete job
76Providing and fixing of material for the insulation of pipe with nitrile tube, tappingwith cello tape, Rockwood 6inch per side , wire mesh , polythene , tapping with cellotape aluminium sheet 26 gauge cladding with dia. complete job including carriage. 19mm thick , 50mm dia (OD) PPR32 mm
7719mm thick , 50mm dia (OD) PPR 40 mm
78Providing and fixing of material for the insulation of pipe with nitrile tube, tappingwith cello tape, Rockwood 6inch per side , wire mesh , polythene , tapping with cellotape for inner wall fittings , complete job including carriage 19mm thick , 50mm dia (OD) PPR 25 mm
79Providing and fixing of electrical heat tape all complete job.
80Providing and fixing brass stop cock of approved quality: 15mm nominal bore.
81Providing anf fixing PTMT grating of approved quality and colour . Circular type 100mm nominal bore.
82Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm
83Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
84Providing and fixing brass bib cock of approved quality : 20 mm nominal bore
85Providing and fixing uplasticised PVC connection pipe with brass unions : 20 mm nominal bore
86Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter
87Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
88Providing and fixng Geyser of 5 Ltr Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58432641
AUTHORITY Government Departments
TENDER VALUE 60.14 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of Store Room With Chowkidar Shed At Rto Office At Leh.
Basic Detail
Tender No CDL 87 of Leh of 2026-27
Bidding Type Tender
Location
City Leh
State Ladakh
Key Dates
Publish Date 06 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 60.14 Lakhs
Tender Fee 605
EMD 1.20 Lakhs
Exemption Not Available
Document List
8b71f8b4-0f40-48f5-a144-389667120cb0.html
BOQ_46762.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

8b71f8b4-0f40-48f5-a144-389667120cb0.html

xls

BOQ_46762.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender