Tender For Supply Installation Testing and Commissioning of Tube Well With All E&M Equipments For Water Atm At Nehru Atal Canteen Nehru Camp Haiderpur Shalimar Bagh Constituency In Ac-14
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Nov 2026
6 days left
EMD
4600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of Tube Well With All E&M Equipments For Water Atm At Nehru Atal Canteen Nehru Camp Haiderpur Shalimar Bagh Constituency In Ac-14
BOQ
| Sl. No. | Item Description |
| 1 | S/o submersible pump set fitted dynamical balanced impeller, NRV-CI, Stage Bowl- CI, suitable for 5 HP/ 14 stage, head 22-33-48, Discharge 350-300-200 Make: BS/SU/KSB or any other make approved by DJB |
| 2 | S/o submersible cable with copper conductor having three core sizes 2.5 mm Sq. working on 1100V Make:-Grandly/Havells/polycab or any other make approved by DJB. |
| 3 | Making and supply of 40 MM Dia M.S. orifice assembly suitable Make of pipe :-Jindal/Tata/ ISI marked/DJB Approved |
| 4 | Making and supply of MS clamp complete with nut and bolts and washers for holding the 40 mm dia pipe including bending and shaping etc. as required |
| 5 | S/o NRV 40 mm dia CI double flanges PN1.0 Make:-Kirloskar /IVC/DJB Approved |
| 6 | S/o CI sluice valve, non rising S.S. spindle, D/F P.N 1.0 of size 40 mm Make:- Kirloskar /IVC/DJB Approved |
| 7 | S/o GI bend 40mm dia 90deg. Double flange. Heavy class Make: - JINDAL/TATA / ISI/ DJB Approved |
| 8 | S/o of GI pipe 40mm dia size ,medium class with GI flange welded in both sides 3 Mtr long with ms strips complete with threading work on each side of pipe each flange should be 4 holes and cut for cables . make :- Jindal / TATA or any other make approved by DJB. |
| 9 | S/o required off size threaded nut-bolts of good quality. Any reputed |
| 10 | Supply of MS bore cover suitable for bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 40mm dia hole in the center. |
| 11 | Making and Supply of G.I tail piece of 40 mm dia. , one mtr. Long size made out of medium class pipe complete with one end threaded and other end fitted with G.I. flange heavy and cut for submersible cable. Make: Jindal/Tata/DJB approved Make |
| 12 | OUT DOOR TYPE 5HP Hut type electrical feeder pillar/metal board Floor/Wall Mounted of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double doorwith 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items. 1. MCCB 63 Amp, 4 Pole-1No. 2. RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No 3. DOL starter of 5HP, 3Phase oil immersed type 1No 4. Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No 5. Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No 6. LED Indicating lamps with fitting (a set of 3 lamps) 1Set 7. Shunt capacitor of 5 KVAR with three phase isolator 1No 8. Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No 9. Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire &thimblingetc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved. |
| 13 | Supply of neoprene rubber sheet having 50% neoprene, 3 mm thick Make Jyoti/National/DJB approved |
| 14 | Installation of all E&M Equipments, lowering pump set in to the bore all piping work fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size I/C watch and ward cartage, taking all safety measures all tools an tackles testing and commissioning of all E&M equipments at no load and full load conditions as per standard from full satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender