Tender For annual repair & maintenance of To Delhi Staff Residential Qtrs. Under Sub Division-Ii, South Building (M), Pwd (Nct), Police Colony Hauz Khas, New Delhi During 2026-2027 (Sh: Day To Day Complaints In Various Flats At Asian Games Village, N
Tender Value
32.64 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
6 days left
EMD
65287
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of To Delhi Staff Residential Qtrs. Under Sub Division-Ii, South Building (M), Pwd (Nct), Police Colony Hauz Khas, New Delhi During 2026-2027 (Sh: Day To Day Complaints In Various Flats At Asian Games Village, New Delhi).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
| 2 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 4 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 6 | Granite stone slab of colour black, Cherry/Ruby red |
| 7 | Area of slab upto 0.50 sqm |
| 8 | Area of slab over 0.50 sqm |
| 9 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 10 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : |
| 11 | Decorative veneer facings of approved manufacture |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 13 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 14 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 15 | Fixed to steel windows by welding |
| 16 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. |
| 17 | With 2nd class teak wood beading 62X19 mm |
| 18 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sadh and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC etruded galzing beads, interlocks and inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fastners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile and frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardwre and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh/Glazing of plain/toughned/laminated/doubel glass unit with /without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separtely.Note: Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for :i) Sites with basic wind speed >45 m/sec as per IS 875- Part 3ii) Sites with structure height more than 20m for all wind speeds. |
| 19 | Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium Channel for roller track, wool pile, nylon rollers with SS 304 body.Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). |
| 20 | Fixed window / ventilator without mullion / transom.Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 metre) |
| 21 | Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles.Using R3 series with frame (55mm & above ) x (45mm & above) & sash /mullion (55mm & above) x (65mm & above). (Height above 1.2 metre) |
| 22 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. |
| 23 | 125 mm |
| 24 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 25 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. |
| 26 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 27 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 28 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 29 | 10 x 160 mm |
| 30 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 31 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 32 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 33 | Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm |
| 34 | Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : |
| 35 | Red sand stone slab |
| 36 | 40 to 50 mm thick |
| 37 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 38 | 110 mm diameter |
| 39 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 40 | Coupler110 mm |
| 41 | Bend 87.5°110 mm bend |
| 42 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 43 | 110 mm |
| 44 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 45 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
| 46 | Ridges plain (500 - 600mm) |
| 47 | Gutter (600 mm over all girth) |
| 48 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 49 | 1:6 (1 cement: 6 coarse sand) |
| 50 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 51 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 53 | Two or more coats on new work |
| 54 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 55 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 56 | Two coats |
| 57 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 58 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 59 | One or more coats on old work |
| 60 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 61 | With cement mortar 1:4 (1cement: 4 coarse sand) |
| 62 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 63 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
| 64 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 65 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in - charge. |
| 66 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 67 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 68 | In cement mortar |
| 69 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 70 | For thickness of tiles 10 mm to 25 mm |
| 71 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 72 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : |
| 73 | Thickness above 10 mm up to 25 mm |
| 74 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 75 | 15 mm to 40 mm nominal bore |
| 76 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 77 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 78 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 79 | Kitchen sink with drain board |
| 80 | 510x1040 mm bowl depth 250 mm |
| 81 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 82 | Flexible pipe |
| 83 | 32 mm dia |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 85 | 20 mm nominal dia Pipes |
| 86 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 87 | 20 mm nominal dia Pipes |
| 88 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 89 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 90 | 15 mm nominal bore |
| 91 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 92 | 15 mm nominal bore |
| 93 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 94 | 15mm nominal bore |
| 95 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 96 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. |
| 97 | Upto 5 mm depth and 5 mm width |
| 98 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 99 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 100 | 50 mm average thickness |
| 101 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 102 | Bars upto 12 mm diameter |
| 103 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect. |
| 104 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surfacearea mixed with specified proportion of approved polymer |
| 105 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. |
| 106 | 12 mm average thickness. |
| 107 | Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. |
| 108 | Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument. |
| 109 | 25 mm thick in Grade M25 with cement content not lessthan 330 kg per cum |
| 110 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. |
| 111 | Providing and fixing of Glazed vitrified Digital Wall Tiles (Matte/Gloss/Wooden finish) of all sizes not less than 300 x 600 mm conforming to IS: 15622 (Thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skiriting, risers of steps and dado over 12mm thick bed of cement mortar 1:3 (cement:3 coarse sand) and jointing with grey cement slurry @ 3.30 kg. per sqm. including pointing in white cement mixed with pigment of matching the shade complete. |
| 112 | Providing and fixing CP Brass Concealed body for high flow Divertor of JQUAR make Cat No. ALD-079N with Single lever exposed parts Kit CAT No. ARI-CHR-39079NK or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 113 | Provding and fixing CP single lever basin mixer W/o pop up waste system JAQUAR make CAT No. FLP-CHR-5005NB or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 114 | Providing and fixing Toilet roll holder of JAQUAR make CAT No. AKP-35753PS or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 115 | Providing and fixing CP Brass bottle trap of JAQUAR make CAT No. ALD-769L300x190 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 116 | Providing and fixing C.P. Brass Overhead Shower of JAQUAR make CAT No. OHS-1755 or equivalent make i/c. making all connection complete as per direction of Engineer-in-charge. |
| 117 | Providing and fixing CP Brass telephone Hand Shower round shape JAQUAR make CAT No. HSH-1937 with Premium wall bracket CAT No. SHA-555 with Flexible Tube 12mm dia 1.5 mtr long CAT No. SHA-549D12 & Vignette Prime bath tub spout with button CAT No. SPJ-85463 or equivalent make i/c. making all connection complete as per direction of Engineer-in-charge. |
| 118 | Providing and fixing Rimless single piece W.C. of JAQUAR make CAT No. ONS-WHT-10853S300UFSM or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 119 | Providing and fixing Wall Mounted WC of JAQUAR make CAT No. 39951UFSM with fittings like Concealed Cistern of JAQUAR make Cat No. JCS-WHT-2400 Plate Fusion JCP-CHR-292415 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 120 | Providing and fixing Towel Ring of JAQUAR make CAT No. ACN-1121BN or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 121 | Providing and fixing Glass Corner of JAQUAR make CAT No. ACN-1173 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 122 | Providing and fixing C.P. Brass Glass Shelf 600 mm (with brass brackets) of JAQUAR make CAT No. AKP-35771P or equivalent make i/c. making all connection complete as per direction of Engineer-in-charge. |
| 123 | Providing and fixing Towel Rack 600mm long with lower hangers of JAQUAR make CAT No. AKP-35781PS or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 124 | Providing and fixing CP Brass Sink Mixer with regular spout T/M (Swing Spout) of JAQUAR make CAT No. ARI-CHR-39309 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 125 | Providing and fixing C.P. Brass Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook of JAQUAR make CAT No. ALD-CHR-577 or equivalent make i/c. making all connection complete as per direction of Engineer-in-charge. |
| 126 | Providing and fixing Counter wash basin of size 615x415x150 mm of JAQUAR make CAT No. DRS-WHT-37601 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 127 | Providing and fixing Table top wash basin of size 495x395x150 mm of JAQUAR make CAT No. JDS-WHT-25911 or equivalent make i/c making all connection complete as per direction of Engineer-in-charge. |
| 128 | Providing and fixing C.P. Brass Angular Stop Cock with flange (Angular stop cock) of JAQUAR make CAT No. CQT-CHR-23059 i/c. making all connection complete as per direction of Engineer-in-charge. |
| 129 | Providing and fixing C.P. Brass Soap Dispenser of JAQUAR make CAT No. ACN-CHR-1137N i/c. making all connection complete as per direction of Engineer-in-charge. |
| 130 | Providing and fixing C.P. Brass Soap Dish of JAQUAR make CAT No. AKP-35731P i/c. making all connection complete as per direction of Engineer-in-charge. |
| 131 | Providing and fixing C.P. Brass waste coupling of JAQUAR make CAT No. ALD-CHR-705L130 i/c making all connection complete as per direction of Engineer-in-charge. |
| 132 | Providing and fixing C.P. Brass Shower Arm 375 mm Long of JAQUAR make CAT No. SHA-CHR-455L400 i/c. making all connection complete as per direction of Engineer-in-charge. |
| 133 | Providing and fixing of white metal of chromium finished handles of of approved quality & make with necessary screws etc all complete. 100 mm |
| 134 | Providing and fixing of white metal handles of approved quality & make with necessary screws etc all complete. 200 mm |
| 135 | Providing and fixing of white metal handles of approved quality & make with necessary screws etc all complete. 150 mm |
| 136 | Providing and fixing ISI marked Bright finish S.S. tower bolt , (Barrel type) with necessary screws etc. complete : 250x10 mm |
| 137 | Providing and fixing ISI marked Bright finish S.S. tower bolt , (Barrel type) with necessary screws etc. complete : 200x10 mm |
| 138 | Providing & fixing White Metal with black matt finished polish or required shade mortice latch and lock of GODREJ make CAT No. NEH 15 2C, with six levers including double sided cylinder and a pair of same material and shade lever handles of approved quality i/c all fittings complete as per direction of Engineer-in-charge. |
| 139 | Providing and fixing 10mm thick poly carbonate sheet (two walled multicell hollow) of approved brand and manufacturer in roofing over M.S. tubular frame work including necessary aluminium profiles section H/U profiles, neoprine geskets, silicon sealants etc. and SS screws for fixing of sheet all complete as per directions of Engineer-in-Charge. (M.S. frame to be paid separately). |
| 140 | Providing and fixing cupboard shutter with 18 mm thick one side raw and other side balancing lamination factory pressed BWP, HDHMR Board of Century Ply, Novopan, Kitlam, Ecoboard, Merino, Action Tesa make or equivalent make as per IS : 1659:2004 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately). |
| 141 | Providing and fixing 18 mm thick both side balancing lamination factory pressed BWP, HDHMR Board of Century Ply, Novopan, Kitlam, Ecoboard, Merino, Action Tesa make or equivalent make as per IS : 1659:2004 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. |
| 142 | Providing and fixing 8mm thick both side balancing laminated BWP, HDHMR Board of Century Ply, Novopan, Kitlam, Ecoboard, Merino, Action Tesa make or equivalent make as per IS : 1659:2004 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. |
| 143 | Providing and fixing 5 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 144 | Providing and fixing 1mm thick 16 to 19mm wide PVC high gloss edge binding tape of approved quality for Cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. |
| 145 | Providing and fixing Stainless Steel Legs (100mm) in Cup boards and wherever necessary with necessary screws etc. complete as per direction of Engineer-in-charge. |
| 146 | Providing and fixing Stainless Steel Back rubber door stopper, necessary brass screws etc. to suit shutter thickness all complete as per direction of Engineer-in-charge. |
| 147 | Providing & fixing Sliding Cupboard channel upto 3metre in length with Runner Set including all necessary screws & fittings etc complete as per direction of Engineer-in-charge. |
| 148 | Providing and fixing Aluminium sheet of 1 mm thick on existing brick wall/column surface to retain moisture as per direction of Engineer-in-Charge. |
| 149 | Providing and fixing 18mm thick White Crystalline Nano Stone mirror polished, premoulded and prepolished (Black/White/Off white/Grey & Zebra black & other required color) (premoulded and prepolished) machine cut for Kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 18mm thick ply board base with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Stone of any colour and shade |
| 150 | Providing and Fixing 6 mm thick PVC (Poly Vinyl Chloride) Wall Decorative panneling for wall lining or similar works with necessary screws and other fitting including all charges as per instructions of Engineer in charge. |
| 151 | Old Steel:- Bars, Z-section, Rolled steel sections, Structural Steel section, G.I. barbed wire, Expended metal/IRC fabric, CI/SCI pipes of various diameter, GI pipes of various diameter, CI pipes of various diameter (Broken in pieces), CI Manhole cover & frames( Broken in pieces) CI, DI, LA, etc. |
| 152 | Credit for Old timber scraped/Unserviceable |
| 153 | Credit for Old Aluminium Scrap/Unserviceable |
| 154 | Credit for Old Brass Scrap/Unserviceable |
| 155 | Modified Estimated Cost after using Correction factor on DSR-2023 (Item No.01 to 61) on account of GST @ 0.973=(-) 63,559-(2354025*0.973=2290466) = (2354025-2290466) = 63559) |
| 156 | Add cost index@ 4.03% on DSR-2023 (Item No.01 to 61)= 92306/-(2290466*4.03%=92306) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender