Tender For Construction Of 04 Nos. Classrooms At Govt Middle School Wright Myo Under Rcd, Apwd Wimberlygunj Under Sub Division No-Ii, E&M Division, Apwd, Prothrapur.Sw: Providing Iei & Eei
Tender Value
12.92 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
12 days left
EMD
25857
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 04 Nos. Classrooms At Govt Middle School Wright Myo Under Rcd, Apwd Wimberlygunj Under Sub Division No-Ii, E&M Division, Apwd, Prothrapur.Sw: Providing Iei & Eei
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.a) Group C |
| 2 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 3 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 4 | b) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 5 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch |
| 6 | b) 3 pin 5/6 A socket outlet |
| 7 | c)15/16 A switch |
| 8 | d) 6 pin 15/16 A socket outlet |
| 9 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.a) 6 Module |
| 10 | b) 3 Module |
| 11 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 12 | Supplying of pre-wired for LED, power saving Decorative box type LED tube Batten fittings, 4' powder coated for similar to BAJAJ IVORA® LED BATTEN and 4'x 25 watts High efficiency, power saving LED Batten Cat No. 830258 Bajaj IVORA® LED Batten 25W CDL or its equivalent etc., as required. |
| 13 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 14 | Supplying of Energy Saving BLDC, 5 star rated, A.C. Ceiling fan 1200 mm sweep (White), with all accessories and Step type electronic Fan regulator. (Similar to HAVELLS Efficiencia DX BLDC, Cat No. FHCEO5SWHT48) or its equivalent etc., as required. |
| 15 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 16 | Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 17 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 18 | Supplying of LED Retrofit Bulbs 10 Watts B22 (Cool Day Light). Similar to HAVELLS LED ADORE 10 W B22 CDL 2 STAR LAMP or its equivalent etc., as required. |
| 19 | Supplying of Exhaust fan of size 150 mm sweep with protective bird guard (similar to HAVELLS Ventil Air DX (Off-White) Cat No. FHVVEDXOWH06) with ISI or its equivalent etc., as required. |
| 20 | Installation of exhaust fan in the existing opening, including making good the damage, connection, Upto 450 mm sweep |
| 21 | Supplying and fixing of Street Light luminaries 25 Wattage, with pressure die cast aluminium housing heat resistant glass i/c Clamping arrangement with GI Pipe etc., as required. (Equivalent to BAJAJ EDGE NXT Cat. No. ENXT P 25L WH PO PC SD) or its equivalent etc., as required. |
| 22 | Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2000mm, outer dia 50mm, inner dia 19mm and inner space be filled with crystalline conductive mixture including filling up with electrode (back fill compound) as required for safe earth electrode and providing masonry enclosure with cover plate having locking arrangement etc. as required. (ASHLOK) |
| 23 | Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. |
| 24 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. |
| 25 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)a) 4 way (4 + 12), Double door |
| 26 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as requireb) Single pole |
| 27 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) 63 Amps |
| 28 | Supply, installation, testing and commissioning of 1.5 Ton capacity, 5 star rating wall mounted split Air conditioner, inverter type fitted with rotary compressor operating on 230 V ± 10%, 50 Hz single phase AC supply with evaporator and condensing unit made of copper tubes , cordless remote control, copper piping for both suction and discharge of 3 (three) meters length with protection covering for piping , power and control cabling as per site requirement comprising of following etc. complete as per requirement including first charge of refrigerant. a) Insulated copper pipe lines liquid and suction lines as per manufacturer recommendation.b) Flexible copper cable between indoor & outdoor unit of suitable size as per manufacturer recommendation. c) Drain pipe. |
| 29 | Supplying and fixing of 4 KVA Voltage stabilizer suitable for 1.5 ton Air Conditioner as required. Make: V-guard Model VS 400 (Voltage Range 170V-280 V, 12 amps.) or equivalent. |
| 30 | Providing & Fixing of pre-fabricated stand for keeping outdoor units of 1.5/2 Ton capacity split type AC as required. |
| 31 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 32 | Supplying, Installation, Testing and commissioning of Integrated All-in-one Solar Street Lights fittings (02 Fittings in One Pole) with inbuilt Solar Panel and charge controller having System efficacy >160 lm/W, System Wattage of 15.2 Watts, Lumen output of 2000 lm with IP65 protection, motion sensors etc., i/c 05 meter high hot dip galvanised octagonal poles with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HR sheet and 1mtr long hot dip galvanised standard double arm bracket made up of 40NB dia GI pipe suitable to mount on pole having top 70mm A/F along with base plate of size 200 x 200 x 12mm thick i/c erection of the pole in cement concrete and necessary metallic nut-bolts and accessories as required with 01 years comprehensive warranty for the complete set with all accessories etc as required. Similar to PHILIPS Integrated Solar street light. Cat No. BRC010 LED20/765 IN or its equivalent in Bajaj/Crompton etc as required. |
| 33 | Supplying of following sizes of XLPE insulated Heavy duty armoured Aluminium conductor UG cable of 1.1 KV grade conforming to IS:7098 (Part-I) and IS No. 1554 (Part-I)) 1988 as applicable Make: CCI/Gloster/Havells/Polycab/Finolex or its equivalent etc., as required.(a) 3.5 core X 35 Sqmm |
| 34 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. a) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 35 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing DWC/METAL/HUME pipe as required. a) Above 35 sq. mm and upto 95 sq. mm |
| 36 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on surface as required. a) Above 35 sq. mm and upto 95 sq. mm |
| 37 | Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of urplus excavated soil as directed, within a lead of 50 metres. (60 Mtrs (length) x 0.75 mtrs (depth) x 0.30 mtrs (width) |
| 38 | Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.a) 3½ X 35 sq. mm |
| 39 | Supplying, installation, testing & commissioning of pewired 3 phase 415 V, 50 Hz Havells make 'G' Frame Panel of size 250 Amps \\"AA\\" frame, Single Door, Outgoing Four pole MCCB 01 No. 100 Amps MCCB as incoming and 04 Nos. 63 Amps as outgoing with Cable Alley ( for \\"G\\" Frame panel boards)- outgoing four pole MCCB, incomer 'A' & 'C' frame MCCB, pre-wired meter module, digital voltmeter, digital ammeter, selector switch, CT's control fuse and indicating lights and interconnection with suitable size PVC insulated Copper conductor wire etc as required. Make: HAVELLS Cat No.IHVGF25004 with accessories as required.1)\\"G\\" frame Panel board, Single Door, O/G FP MCCBs, G-Frame 250A \\"AA\\" frame, outgoing 4 ways. Sim to Havells Cat No. IHVGF25004Incomer:2) Fixed thermal & fixed magnetic setting four pole MCCB 100 Amps, 16 kA breaking capacity. Sim to Havells Cat No. IHLGNF0100# - 01 No.Outgoing:3) Fixed thermal & fixed magnetic setting four pole MCCB 63 Amps, 10 kA breaking capacity. Make- Havells. Cat. No. IHLGSF0063.- 04 Nos.4) Cable alley for \\"G\\" Frame Panel board, I/C 250A, O/G 3P GF 6WAY & 4P 2/4Way. Sim to. Havells cat No: ISSBOU06755) Prewired digital meter module with Voltmeter, Ammeter, Selector switch, CT's control fuse & indicating lights. Sim to. Havells Cat No. ISSBOU07116) Porcelain Cut Out 100Amps :- 03 Nos. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender