Tender For Periodic Maintainence On (I) Patrighat Goverta Road Km. 0/0 To 6/0 ( Ii) Plassi To Ukhla Baras Road Km 0/00 To 4/0 (Iii) Banoha To Matour Tanda Road Km 0/0 To 8/0 (Iv) Kuthera To Ghori Matoli Samaila Road Km 0/0 To 4/0 (Sh:-(I) Patrighat G
Tender Overview
Project Description
Tender for Periodic Maintainence On (I) Patrighat Goverta Road Km. 0/0 To 6/0 ( Ii) Plassi To Ukhla Baras Road Km 0/00 To 4/0 (Iii) Banoha To Matour Tanda Road Km 0/0 To 8/0 (Iv) Kuthera To Ghori Matoli Samaila Road Km 0/0 To 4/0 (Sh:-(I) Patrighat Goverta Road providing and laying 30Mm Thick Bituminous Concrete In Km 0/00 To 2/00 ( Ii) Plassi To Ukhla Baras Road providing and laying 30Mm Thick Bituminous Concrete In Km 3/00 To 4/00 (Iii) Banoha To Matour Tanda Road providing and laying 30Mm Thick Bituminous Concrete In Km 5/00 To 7/00 (Iv) Kuthera To Ghori Matoli Samaila Road providing and laying 30Mm Thick Bituminous Concrete In Km 2/00 To 4/00)
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting stone aggregates of 53mm to 22.4 mm (Fifty three to twenty two point four millimetre) nominal size to water bound macadam specifications including in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming, stone screening and binding materials to fillup the interstices of coarse aggregate, watering and compacting to the required density grading-III as per technical specifications clause 405 by manual means including entire carriage of materials within all leads and lifts and other incidentals. |
| 2 | Providing and applying priming coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom On bituminous surface @ 0.25kg/sqm With medium setting bitumen emulsion with in all leads and lifts as per direction of Engineer-in-charge.. |
| 3 | Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom On W.B.M / W.M.M. @ 0.4kg/sqm With rapid setting bitumen emulsion with in all leads and lifts as per direction of Engineer-in-charge. |
| 4 | Providing and Laying Bituminous concrete 30 mm (Thirty milimetre) thick with 100-120 TPH battch type hot mix plant producing an average out pot of 75 tonnes per hour using crushed aggragate of specific grading premixed with bituminous binder @ 5.4 to 5.6 percent (five point four to five point six percent) of mix and filler, transporting the hot mix to work site upto a lead of 1000 metre laid over a previously prepared surface with hydrostatic paver finisher with sensor control to the required level and alignment rolling with smooth wheeled vibratory and tandem roller to achieved the desired compaction as per technical specification clause 509 with in all leads and lifts as per direction of Engineer- in- charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
TodayBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender