Tender For Day To Day Repair And Maintenance Work For Telephone Bhawan Compound Including Iq Of Gandhighat Compound At Puri For The Year 2026-27.
Tender Value
2.75 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
10 days left
EMD
5520
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Repair And Maintenance Work For Telephone Bhawan Compound Including Iq Of Gandhighat Compound At Puri For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Sub-Head : Dismantling and Demolishing |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 3 | Of area 3 sq. metres and below |
| 4 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 5 | Of area 3 sq. metres and below |
| 6 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 7 | 15 mm to 40 mm nominal bore |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 9 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 10 | Sub-Head : Wood and P.V.C. Work |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 12 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 13 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) |
| 14 | On one side only. |
| 15 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 16 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 17 | 25 mm dia (heavy type) |
| 18 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 19 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 20 | 100X58X1.90 mm |
| 21 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 22 | 250x16 mm |
| 23 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 24 | 250x10 mm |
| 25 | 200x10 mm |
| 26 | 150x10 mm |
| 27 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 28 | 125 mm |
| 29 | 100 mm |
| 30 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 31 | Twin rubber stopper |
| 32 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 33 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 34 | 30 mm thick plain PVC door shutters. |
| 35 | Providing and fixing cuboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edege banding tape with hot glue by edege bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) |
| 36 | Sub-Head : Aluminium Work |
| 37 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 38 | For fixed portion |
| 39 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 40 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 41 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 42 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 43 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 44 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 45 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 46 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 47 | Sub-Head : Steel Work |
| 48 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 49 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 50 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 51 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 52 | Sub-Head : Roofing |
| 53 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 54 | (i)Single socketed pipes. |
| 55 | 110 mm diameter |
| 56 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 57 | Bend 87.5° |
| 58 | 110 mm bend |
| 59 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 60 | 110 mm |
| 61 | Sub-Head : Water Proofing |
| 62 | Grading roof for water proofing treatment with |
| 63 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 64 | Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 65 | Sub-Head : Finishing |
| 66 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 67 | 1:4 (1 cement: 4 fine sand) |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 69 | Two or more coats on new work. |
| 70 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 71 | One coat. |
| 72 | White washing with lime to give an even shade : |
| 73 | Old work (two or more coats) . |
| 74 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 75 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 76 | One or more coats on old work. |
| 77 | Sub-Head : Repairs to Buildings |
| 78 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 79 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 80 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
| 81 | Door chowkhats . |
| 82 | Renewing glass panes, with wooden fillets wherever necessary: |
| 83 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 84 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm). |
| 85 | Supplying and fixing new wooden fillets wherever necessary: |
| 86 | Hollock wood fillets. |
| 87 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 88 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 89 | (a) Internal Work- Exposed on wall |
| 90 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 91 | Sub-Head : Sanitary Installations |
| 92 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 93 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 94 | 10 litre capacity - White |
| 95 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 96 | White solid plastic seat with lid |
| 97 | Black solid plastic seat with lid |
| 98 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 99 | Flat back wash basin of size 550x400 mm. |
| 100 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 101 | Flexible pipe |
| 102 | 32 mm dia |
| 103 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 104 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 105 | Providing and fixing PVC health faucet with 1m long PVC hose of approved brand and manufacture and of approved shade - 15mm |
| 106 | Sub-Head : Water Supply |
| 107 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 108 | 20 mm nominal outer dia. Pipes. |
| 109 | 25 mm nominal outer dia .Pipes. |
| 110 | 40 mm nominal outer dia. Pipes. |
| 111 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 112 | 25 mm nominal outer dia. Pipes. |
| 113 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 114 | 45 cm length |
| 115 | 15 mm nominal bore |
| 116 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 117 | 150 mm diameter |
| 118 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 119 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 120 | 15 mm nominal bore. |
| 121 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 122 | 15 mm nominal bore. |
| 123 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 124 | 15mm nominal bore |
| 125 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 126 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 127 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 128 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 129 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 130 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 131 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 132 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 133 | Sub-Head : Drainage |
| 134 | Periodic cleaning of open drain including removel of garbage and disposal of the same to Municipal dumping ground etc complete as directed by the Engineer in charge. |
| 135 | Of size upto 0.25 x 0.30 Mtr |
| 136 | Sub-Head : NEW TECHNOLOGIES AND MATERIALS |
| 137 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 138 | (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 139 | Frame size 65 x 125 mm |
| 140 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 141 | 30 mm thick |
| 142 | Sub-Head : Market Rate Items |
| 143 | Uprooting/Removing trees and plants from roof and walls of building upto any height either by physically uprooting or by pressure spraying suitable herbicide solution like GLYPHOSATE 41% SL (Trade name GLYPHO STAR) of Vedic Agro Science PVT. Ltd or other equivalent product with all due precautions on the entire plant organs as per company's recommendations and insructions including making good the damages caused with cement plaster 1:4 or cement concrete 1:2:4 as needed etc. all complete. The rate includes all materials, labour, T&P & incidentals etc. complete but excluding the cost of scaffolding, if applicable, which will be paid for separately. |
| 144 | Providing & fixing \\"S\\" or \\"P\\" trap including dismantling sorrounding concrete area and repalciing with new PVC trap with sealing of gap/joint with mixture of white cement and adhesive made of Dr. fixit i/c removal of rubbish, clay debrishes, sludge deposit and making top finish with concreting etc all complete as per direction of E.I.C. (a) For Bath & Kitchen trap. |
| 145 | Providing & erecting single scaffolding system on the external side of building upto three storey height made of best quality bamboo ballies @ 1.5 m centre to centre in both directions including bracing & stiffening as required. |
| 146 | Shifting and re-fixing of scaffolding materials for removing trees from the external walls and roofs of staff Qtrs. up to height about 12.00 mtr.as per the direction of E-I-C. |
| 147 | Providing and fixing PVC MTA/FTA at repairing with new PVC pipe including cutting and threding the pipe and making good all complete as per the direction of E-I-C. |
| 148 | 20 mm dia PVC MTA/FTA |
| 149 | 25 mm dia PVC MTA/FTA |
| 150 | 40mm dia PVC MTA/FTA |
| 151 | Providing and fixing PVC union in New PVC pipe including cutting and threding the pipe and making good all complete as per the direction of E-I-C. |
| 152 | 20 mm dia pvc Union |
| 153 | 25 mm dia pvc Union |
| 154 | Supplying & engaging unskilled labour along with T&P for cleaning of roof terrace , chajja, rain water pipe mouth, drains & cleaning of bushes ,jungles etc. as & when required and as per direction of Engineer-in-Charge. |
| 155 | Easing and adjusting of Door/window shutter for free movement of the shutter by making necessary repairs to shutter & frame all complete per direction of Engineer-in-charge. |
| 156 | Cleaning of choked manhole chambers including removing the waste & sludge deposits and flushing of sewer line between manholes with sufficient water while rodding with split bamboo etc. all complete as per direction of Engineer-in-Charge. |
| 157 | Providing & fixing PVC ball valve with handle of approved quality in existing pipe line including removing the damaged valve etc. all complete as per the direction of Engineer-in-Charge. |
| 158 | 25 mm dia pvc gate valve |
| 159 | 40 mm dia pvc gate valve |
| 160 | Credit for taking into possession unserviceable dismantled GI/ CI/ M.S. pipes & fittings/ reinforcement. |
| 161 | Old damaged iron grills/GI / CI pipes & fittings/ M.S reinforcement. |
| 162 | Credit for taking away unserviceable recovered water supply fittings / fixutures as is where is : |
| 163 | Unserviciable Brass Bib/stop cocks/pillar tap |
| 164 | Credit for taking into possession unserviceable damaged PVC cistern. |
| 165 | Labour for repairing of cistern for floor mounted european commode inclding replacing the parts (Cost of materials if required will be paid for separately) etc. complete as per direction of Engineer-in-charge. |
| 166 | Providing syphone for floor mounted Eurepean commode of approved brand as per direction of Engineer-in-charge. |
| 167 | Providing ball cock for wall mounted European commode of approved brand etc. complete as per direction of Engineer-in-charge. |
| 168 | Attending repairs to wooden or Aluminium doors or windows by removing and attending repairs including using necessary screws, nails and other accessories required for smooth functioning of door/ window as directed by the Engineer -in - charge. (Hinges, Floor springs, locks will be paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender