Tender For Extension Of 6.6Kv Feeder No. A3 & A4 (02 Nos) From Substation No. 2 To Substation ‘A Of Rvr With Bus Bar Arrangement At Kusmunda Open Cast Project
Tender Value
53.13 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
16 days left
EMD
66500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Korba → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Extension Of 6.6Kv Feeder No. A3 & A4 (02 Nos) From Substation No. 2 To Substation ‘A Of Rvr With Bus Bar Arrangement At Kusmunda Open Cast Project
BOQ
| Sl. No. | Item Description |
| 1 | Description of Work |
| 2 | Providing of 11 KV \\"V\\" cross arm 65x65x6 mm angle type with back cleat. |
| 3 | Providing 11 KV Polymeric Pin Insulator with Pin & hardware. |
| 4 | Providing of 11 KV Polymeric type Disc Insulator with hardware. |
| 5 | Providing of 11 KV Guarding Channel 100x50 mm set. |
| 6 | Providing of 11 KV TOP clamp Angle type with cleat. |
| 7 | Providing of 11 KV Polymer Lightning Arrestor |
| 8 | Fixing of Lighting Arrestor. (1 Set = 3 No.) |
| 9 | Supplying and fitting of MS Nut And Bolts 16x160 mm. |
| 10 | Stringing of Carpet Guarding (GI wire will be provided by department.) |
| 11 | Erection of disc/ pin insulators for 11 KV OHL as required. |
| 12 | Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33KV over head lines as required. |
| 13 | Erection of metallic poles of following length above 10 mts and upto 12 mts (With concreting).(SP=140, DP=50) |
| 14 | Erection of pole top/straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required. |
| 15 | Transportation of pole from road side to pole pits. |
| 16 | Shifting of materials from workshop other than pole upto pole pit and dismantled pole to workshop or other working site as required. |
| 17 | Stringing of Dog Conductor (3 wire) (Conductor will be provided by department ). |
| 18 | Stringing of Rabbit Conductor (1 wire, for Earth continuity) (Conductor will be provided by department ). |
| 19 | Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.(With concreting) |
| 20 | Providing of 11 Kv Porcelain type AB Switch with complete fitting. |
| 21 | Supply of Aluminium alloy tube to Tube Coupler suitable for Aluminum Bus (one side suitable for al. bus other side for ACSR DOG) |
| 22 | Supply of Aluminium tube bus bar(6 mtr length)size 40mm |
| 23 | Supply of Aluminium alloy T support for Connection of Top Bus to Bottom Bus in Bus Bar bay. |
| 24 | Supply of 33KV Post insulator with hardware and PG Clamps suitable for Holding aluminium Bus Bar. |
| 25 | Earth work for grouting of AB Switch, Bus Bar Structure, lighting arrester and transformer base (Earth Work in excavation by mechanical means (hydraulic excavator)/manual means in Foundation trenches or drains(notexceeding1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift up to 1.5mincludinggettingoutthe excavated soil and disposal of surplus excavated soil as directed with in a lead of 50 m. All kinds of soil.(Pit size for Bus Bar 0.75 m X 0.75m X 0.75m X 10 nos)*2 |
| 26 | Concreting for grouting of AB switch, Bus Bar structure lightning arrestor and transformer base ratio 1:3:6(1 cement: 3sand: 6stone aggregate) Concreting for Bus Bar 0.75m X 0.75m X 0.75m X 10 nos*2 |
| 27 | Steel work welded in built up section trusses and frame work including cutting hoisting and fixing in position of al components.(Channel size- 100 mm*50 mm total length of channel =60 m, weight of channel=9.56 kg/m, total weight of channel =9.56*60 =573.6 kg)*2 |
| 28 | Providing of DC Cross arm of 100x50 mm channel (4'/1.2 Mtr. Centre) |
| 29 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender