Tender For Covering Of Shed In Front Of Pmu Office Building Under Tallah Pumping Station.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
16 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Covering Of Shed In Front Of Pmu Office Building Under Tallah Pumping Station.
BOQ
| Sl. No. | Item Description |
| 1 | BUILDING WORKS (E) ROOFING, SHEET WALLING&WATERPROOF TREATMENT . A. ROOFING & SHEETWALLING9. Galvanised corrugated iron sheet work (excluding the supportingframe work) fitted and fixed with 10 mm. dia J orL hook-bolts, limpet and bitumen washers and putty complete with150 mm. end lap and one corrugation minimum side lap. (Payment tobe made on area of finished work)(GCI sheet to be supplied bycontractor) (i) In Roof:- c) With 0.80 mm thick sheet |
| 2 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 2A. M.S. structural works withhollow sections (square or rectangular shape) conforming to IS:806-1968 & IS:1161-1998) connected to one another with bracket,gusset, cleat as per design, drawing & direction ofEngineer-in-Charge complete including cutting to requisite shape &size, fabrication including metal arc welding conforming to IS:816-1969 & IS: 9595 using electrodes of approved make and brandconforming to IS:814- 2004, haulage, hoisting and erection allcomplete. The rate includes the cost of all M.S. Hollow section, allconsumables such as electrodes, gas and hire charges of all toolsand plants and labour reqired for execution and all incidental chages(such as electricity, labour insurance) etc. complete. Payment to bemade on the basis of calculated weight of structural memebrs of MSHolow Section as specified in relevent IS code in finished workPayment for gusset, bracket, cleat may be made by adding the actualweight of such items with weight of finished structural members. Therates are considered for a hight of erection 8 m. / 2nd floor level fromthe ground. Add 1.5 % extra over the rate for each additional floor or4m. beyond the initial 8 m. or part thereof. i) For roof truss works a)Span up to 12 Mtr |
| 3 | BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLESETC 13. Removal of rubbish,earth etc. from the working site anddisposal of the same beyond the compound, in conformity with theMunicipal / Corporation Rules for such disposal, loading into truckand cleaning the site in all respect as per direction of Engineer incharge |
| 4 | BUILDING WORKS ( C ) Brickworks,Concrete Works etc 10?.Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, inground floor as per relevant IS codes.(i) Pakur Variety |
| 5 | SECTION 1. ------------BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS 1 (a) Priming one coat onsteel or other metal surface with synthetic oil bound primer ofapproved quality including smoothening surfaces by sand paperingetc (This item is applicable to new work or old work when the originalsurface has been exposed by removal of old paint.) |
| 6 | BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A)ORIGINAL WORKS.(2)(A) Painting with best quality synthetic enamelpaint of approved make and brand including smoothening surface bysand papering etc. including using of approved putty etc. on thesurface, if necessary :(b) On steel or other metal surface : With otherthan hi-gloss of approved quality-(iv) Two coats (with any shadeexcept white) |
| 7 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (a) Tack weld |
| 8 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (b) Continuous weld. |
| 9 | BUILDING WORKS ( C ) Brickworks,Concrete Works etc B.CONCRETE WORKS 3. Making one set of scaffolding only forreplacing glass panels, painting, uprooting plant and another repairingworks of building and S&P works for external works only with 10 cm.dia bamboo as main posts at the rate of 1 metre centre to centre and7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing withnecessary coir, nails etc. as per direction of the Engineer-incharge.(This item should be executed only after prior approval of theEngineer-incharge). Firstly, one number to be paid and then labourrate for shifting up to further nineteenth (19) times @ 10% each timeto be considered. If necessary further after twenty times of total use,another one number new and labour rate for shifting to be considered accordingly a) 3.90 metre height |
| 10 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 8. M.S. works in brackets madefrom flats, angles, tees etc. to sizes specialy bent, twisted, forged;making holes drilled and fitted to rafter of trusses with necessarybolts, nuts, washer or screws etc. (length of straight not less than 230mm) (To be used for repair works only) |
| 11 | BASIC COST OF MATERIALS:TABLE NO,I-1 BASIC RATES OFCEMENT & STEEL MATERIALS.-2 V STEEL PLATES(E250CONFORMS TO IS: 2062-2006)(A)6-10 MM.NOTE: THE ABOVE RATES ARE EXCLUSIVE OF GST OVERHEADCHARGES & CONTRACTORS PROFIT. REFERENCESCHEDULE:VOLUME III:ROADS & BRIDGE WORKS,PWD (WB)SCHEDULE OF RATES:2018,PAGE-218. |
| 12 | BUILDING WORKS(M) DRAIN, DOWN PIPES, CHIMNEY ETC?.(C).ADDITIONAL RATE?(21)Supplying, fitting & fixing UPVC pipes AType and fittings conforming to IS:13592-1992 with all necessaryclamps nails, including making holes in walls, floor etc. cuttingtrenches in any soil through masonry concrete structures etc ifnecessary and mending good damages including joining with jointingmaterails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A)UPVC Pipes:(ii) 110 mm. Dia |
| 13 | Sub Total |
| 14 | GST 18% |
| 15 | L.W.Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender