Tender For Painting & Civil Maintenance To The Rutland Lighthouse, Transit Accommodation Of Sister Island, Patrie Island.
Tender Value
6.66 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
13 days left
EMD
13500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Painting & Civil Maintenance To The Rutland Lighthouse, Transit Accommodation Of Sister Island, Patrie Island.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning jungles including uprooting of rank vegetation, cutting grass, busles etc. and disposal of rubbish up to a distance of 50m out of periphery of the area cleared as directed. Including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete. |
| 2 | Wall Painting with Acrylic Emulsion Paint of Interior Grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, over and including a coat of water thinnable cement primer of approved brand and manufacture to give an even shade after preparing the surface properly & then cleaning the cement painting spots on the floors,furnitures,doors & windows etc as directed. Including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. . including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 3 | Finishing walls with 1st quality Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Asian/ Snowcem/ Berger) on new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) at all heights to give an even shade etc. wherever required including supply of all materials, labours, tools, scaffoldings etc. complete as directed by the engineer in charge. Iincluding cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 4 | Engaging mechanized dinghi for transportation of all materials, labours, departmental staff, collection of water from ship and for safety of work party including hiring and operational charged, fuel etc. complete as directed. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 5 | Providing and fixing aluminium ladder 3.50m. Long made out of anodized Aluminium sections, fixing the ladder to the slab etc as per drawing including, supply of all materials, labours, tools&plants etc., complete. (for Rutland LH). including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 6 | Supply & fixing of Stainless Steel/G.I. board for Rutland LH of size 5ft. X 4ft and Stainless Steel leg 11 feet height with Vinyl printing (Sticker type)with printing & fixing writing/ designing name plate board like departmental logo, technical details or any other details which decided by the Directorate of Lighthouses & Lightships, including cost of all materials, labours, tools & plants, welding , grinding to give smooth finish charges and all other charges etc. complete as directed. ( design board with aestheticaly good with curves and other fittings.). including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 7 | Providing and fixing 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. complete as directed. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 8 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg / c * um screw withdrawal strength of 2200 N (Face) & 1100 N (Edge)compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). complete as directed. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 9 | Providing and fixing aluminium sliding door bolts 250x16mm size, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws. complete as directed. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc completeNote: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 10 | Providing and fixing Aluminium Handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 11 | Providing and fixing Aluminium Tower bolt ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 12 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) including cost of tools, fixing charges, labour charges etc. complete. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 13 | Providing and fixing unplasticised P.V.C. connection pipe 15 mm nominal bore with 45 cm length with PTMT Nuts, collar and bush of approved quality and colour. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 14 | Providing and fixing PTMT Waste Coupling for wash basin and sink of 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms of approved quality and colour. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 15 | Providing and fixing 15 mm nominal bore PTMT bib cock of approved quality inlcuding cost of tools and plants, labour charges, fitting charges etc complete as directed. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 16 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any Gl fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 17 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete. |
| 18 | Cleaning of the exterior Ceramic tiled surface of lighthouse tower, Chequered tiles and inside Lighthouse Ceramic floor tiles with soap solution, removing vegetation, dirt, algea from the surfaces of tiles, including the cost of all materials, labours, brushes, broom, cleaning cloth etc complete as directed by the Engineer in charge. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 19 | Removal of aluminium windows carefully without damaging and stacking properly as per direction, repair the damaged member for easy opening and closing and refixing the same at the same place after repairing work to lintles, plastering etc., inclunding cost of labour, tools & plants, scaffolding etc complete as directed. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 20 | Dismantling of wooden doors, windows and ventilators, clerestory windows (steel or wood) shutter including chowkhats,architrave, holdfasts etc, area not exceeding up to 3Sqm, without damaging the adjacent structure including stacking the serviceable material and disposal of unserviceable materials supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. . including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 21 | Painting two coats over previously painted doors and windows metal surfaces with 1st quality aluminium paint of approved make (Asian/Berger) & colour to give an evenshade after thoroughly brushing, scraping, brooming, cleaning ths surface of all dirt, dust & other foreign matter etc as directed including supply of all materials, labour, tools & plants and all other charges complete. complete as directed by Engineer-in-Charge including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 22 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms of approved quality and colour including cost of tools and plants, labour charges etc completed. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 23 | Finishing with Epoxy paint two or more coats on steel work at all locations prepared to give an evenshade after thoroughly brushing, scraping, brooming, cleaning ths surface of all dirt, dust & other foreign matter etc as directed including supply of all materials, labour, tools & plants and all other charges complete. complete as directed by Engineer-in-Charge. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete |
| 24 | Providing and fixing swing type fully glazed single leaf aluminium window shutter , aluminium gril with aluminium frame (Jindal make conforming to IS: 733 and IS: 1285) including fixing glazing With float glass/Fiber glass panes of 4.0 mm thickness, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber,all other Aluminium fixtures like Aluminium butt hinges, tower bolts, handles, hooks & eyes etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, including all materials, tools & plants, labours and all other charges etc. complete as directed by the engineer in charge. including cost of all materials labour charges, minor tools & plants, cost of transportation charges upto worksite including overheads, additional labour charges for remote condition, loading & unloading, workmen insurance, safety equipment’s gadgets etc complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender