Tender For Construction Of Additional Two Lane Concrete Road Leading From Jsw Tippler To Sub Station-3 (Ss-3) Junction And Mchp Settling Pond To Transport Tower-4(Tt-4) Of Mchp Inside Harbour Area.
Tender Value
23.04 Crore
Estimated cost
Bid Submission
06 Dec 2026
29 days left
EMD
33.04 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Additional Two Lane Concrete Road Leading From Jsw Tippler To Sub Station-3 (Ss-3) Junction And Mchp Settling Pond To Transport Tower-4(Tt-4) Of Mchp Inside Harbour Area.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting the shrub jungles, bushes, cleaning, removing & disposing the debrises away from the site by Private Vehicles with all leads and lifts including levelling, dressing the ground with supply of all labour, T&P, taxes excluding GST, hire and running charges of vehicles including fuel, consumables, tollage, pot entry fees etc. complete as directed by the Engineer-In-Charge. |
| 2 | Filling with dredged spoil up to required level including collecting, conveying by private trucks / dumpers within a lead of 10 km (Avg.) and lifts, loading & unloading, spreading in layers not exceeding 1.00 m, watering, compacting by using VRR to achieve OMC, dressing, leveling to required gradient etc. with supply of all labour, materials, T&P, taxes, royalties, running & hire charges of vehicles, machineries, Port entry fees etc. complete as per direction of Engineer in charge excluding GST.N.B:- 10% voids shall be deducted from the measured quantity of sand after compaction to arrive at the payable quantity. |
| 3 | Earth work excavation in all kinds of soil from the existing ground level in foundation trenches with all lead and lifts & levelling, ramming as per requirement etc with disposal of the excavated materials to identified locations by vehicles with supply of all labour, materials, T&P, hire & running charges of all machineries, Port entry fees, taxes etc all complete excluding GST and as per direction of Engineer in charge. |
| 4 | P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, port entry fees, taxes, etc. complete but excluding cost of GST as directed by Engineer-in-charge |
| 5 | C.C. M20 for R.C.C. works using 20mm and 10 mm size C.B.G. chipsfor all floors, foundation & plinth etc. of approved quality, mixing as perapproved design mix, hoisting, laying, compacting with 40 to 60 neddle vibrator, curing with cost and supply of all materials, labour, T&P, taxes,tollage, royalties, port entry fees, etc. all complete but Excluding GST as directed by Engineer-in-charge. |
| 6 | Providing & laying quarry dust of aprroved as sub-base in layers not exceeding 225mm thick each watering and compacting to the required density in O.M.C with Vibratory Roller with supply of all material labour transporation hire and running charge of equipments, taxes , tollage ,royalties, port entry fees, etc all complete but excluding GST as directed by EIC. |
| 7 | Providing, laying, spreading and compacting stone aggregates of IRC Gr I(90 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber,applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes, port entry fees, tollage , royalties, etc all complete but excluding GST as directed by EIC. |
| 8 | Providing, laying, spreading and compacting stone aggregates of IRC Gr-II(63 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes, port entry fees, tollage, port entry fees, royalties etc all complete but excluding GST as directed by EIC. |
| 9 | Construction of dry lean cement concrete subbase over a preapred subgrade with coarse and fine aggregate confirming to IS:383, the size of coarse aggregate not exceeding 25mm., aggregate cement ration not to exceed 15:1, aggregate gradation after blending to be as per table 600.1, cement content not to be less than 150Kg./Cum., optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10MPA at 7 days, mixed in a batching plant, transported to site, laid and compacting with vibratory roller 8 to 10 ton capacity , finshing and curing as per clause 601 of MoSRT&H specification for road & bridge works (4th revision) with supply of all materials, labour, transportation, hire & running charges of equipments, taxes, tollage, port entry fees, royalties, etc, all complete but excluding GST as directed by Engineer-in-charge. |
| 10 | Supplying and laying 125 Micron polythene separation membrane with overlapping of 300 mm at joints including cleaning the surface before placing the membrane etc., complete including cost of all materials, labour, T&P, tollage, taxes, port entry fees, excluding GSTetc, all complete as directed by the Engineer In Chrage. (N.B. : No payment will be made for overlapping.) |
| 11 | Cement concrete of M-30 grade of PQC by using Crusher broken hard granite chips of 12mm to 20 mm size of approved quality for RCC road work, mixing in a Batching plant, transporting the concrete by any approved means, hoisting, laying on road pavement slabs in panels of required size, providing thermocol at top 50 mm of the panel joints so as to create a gap of 12mm between panels, compacting by mechanical vibrator with 60mm needle vibrator, finished smooth to the exposed surface to proper grade and camber, texturing the top surface by brooming with wire brush, curing by ponding, barricading the area for proper safety of the fresh concrete without obstructing the traffic, etc with supply of all materials, labour, T&P, tollage, port entry fees, all transportation charges, engagement, hire & running charges of all machineries, taxes excluding GST and excluding cost of formwork, cost of joints, cost of steel & labour charges for bending & binding of steel etc all complete as directed by Engineer in Charge.N.B. : 1) Two separate Mix Design shall be conducted with different Cement brand for RCC work & Barricading the site if required.2) material testing cost borne by contractor.) |
| 12 | Supply Tor/TMT steel from Green Field steel manufacturer, Integrated Steel plant of Fe-500 confirming to IS-1786 including cutting,straightening, bending, binding & placing the grills in position for RCCworks binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour, materials, transportation charges, T&P, port entry fees, taxes,etc. all complete but excluding GST as per the direction of Engineer-incharge.(NB: No payment shall be made for extra weight thantheoretical co-efficient and no wastage shall be paid). |
| 13 | Supplying & forming 12mm wide x 85mm deep longitudional joints by fixing 12 mm dia 640mm long HYSD bars @ 450mm C/C painted 50mm at center with anti-corrosive paint including providing & fixing bitumen paper, painting one side of concrete surface (250mm thick) with bituminous black paint, cutting grooves of required size and sealing the grooves with bitumastic filler etc, complete with cost & supply of all materials, reinforcement, T&P, labour, Hire and running charges of all machineries, safety measures, taxes, port entry fees excluding GST etc., all complete as directed by Engineer-In-Charge. |
| 14 | Supplying & forming 12mm wide x 60mm deep contraction joints by fixing 32 mm dia 450mm long mild steel round bars @ 300mm C/C including painting two third of the bars with anticorrosive paint & covering the same with 125 micron polythene fitted & cutting grooves of required size and sealing the grooves with bitumastic filler etc, complete with cost & supply of all materials including dowel bars, T&P, labour, Hire and running charges, of all machineries, safety measures, taxes, port entry fees excluding GST etc. all complete as directed by Engineer-In-Charge. |
| 15 | Supplying & forming 25mm wide x 250mm deep expansion joints by fixing 32 mm dia 450mm long mild steel bars @ 300mm C/C including painted 275mm length of bars with anti-corrosive paint & covering the same with 125 micron polythene fitted and HDFC/G.I. cap of 100 mm long at the other end including fixing 25mm thick & 220 mm deep joint filler Board (Shalitax or equivalent) painting one side of concrete surface with bituminous black paint & sealing the groove with bitumastic filler etc, all complete with cost & supply of all materials including dowel bars, T&P, labour, Hire and running charges, of all machineries, safety measures, taxes, port entry fees excluding GST etc., all complete as directed by Engineer-In-Charge. |
| 16 | Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period & painting to the Board surface with oil/lubricants after each use with supply of all materials, labour, T&P, taxes, port entry fees, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge. |
| 17 | Foundation & Plinth |
| 18 | Dismantling and removing R.C.C columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, port entry fees including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. |
| 19 | Engagement of 5HP diesel pump for dewatering purpose including hire & running charges of all machineries, equipments, cost of fuel & lubricants, labour, T&P, taxes, Port entry fees etc. all complete excluding GST and as per direction of Engineer in charge.NB : No idle hours shall be paid. |
| 20 | Deployment of following machineries for shifting the over heapped earth/backfilling, mixed cargo materials and damaged heavy concrete blocks, structurals etc. in the alignment of proposed road including hire & running charges of all machineries, equipments, cost of fuel & lubricants, labour, T&P, taxes, Port entry fees etc. all complete excluding GST and as per direction of Engineer in charge.NB : No idle hours shall be paid. |
| 21 | Hydraulic excavator of 1 cum Bucket Capacity |
| 22 | Hydraulic Excavator of 2 cum bucket |
| 23 | Tractor Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender