Tender For special Repair To Building Bldg No P-127 Sub Division B/R-I Office At Ahrr Under Ge E/M repair renovation Hospital, Delhi Cantt-10
Tender Value
35.72 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
21 days left
EMD
71440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Building Bldg No P-127 Sub Division B/R-I Office At Ahrr Under Ge E/M repair renovation Hospital, Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.50m wide and n.exc 1.5m deep for foundation etc.in hard/dense soil and getting out complete all as specified and directed. |
| 2 | M&L for cement concrete 1:2:4 type B2 (40mm graded aggregate) as in foundations filling and mass concrete for including pilasters buttresses columns pillars boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 3 | Supply fixing in repair fabrication for mild steel steel work in tubular/square trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 4 | S&F in repair Plates (plain or chequered) Fe-410-W(Gde E-250) quality B channels square cut or notched (ordinary and counter sunk) forming holes without any attachment complete all as specified and directed. |
| 5 | Returning filling in including spreading levelling watering and well ramming in layers not exec 25 cm complete all as specified and directed. |
| 6 | Removing excavated material exc 250 m but n exc 500 m and depositing where directed complete all as specified and directed. |
| 7 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed. |
| 8 | M&L 25mm thick cement concrete type B-1 1:2:4 (20mm graded aggregate) as sub-base to flooring complete all as specified and directed. |
| 9 | S&F in repair for pre-painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Iroof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 10 | S&F pre-painted galvaume aluminium zink coating Gl based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof complete all as specified and directed. |
| 11 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition complete all as specified and directed. |
| 12 | M&L for reinforced cement concrete (Nominal mix), 1:2:4, 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 13 | S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and directed. |
| 14 | M&L for reinforcement cement concrete type B1 1:2:4 (using 20mm graded aggregates) for column like complete all as specified. |
| 15 | All as per item no. 28 above but 5mm dia and over and up to and including 10mm dia in stirrups spacers and binders, complete all as specified and directed. |
| 16 | S&F rough finished formwork to flat faces of walls, retaining walls, abutments, parapets and staircase railings, slab and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified. |
| 17 | M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 18 | Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc all as specified. |
| 19 | M&L Brick work with sub class \\"B\\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to seven story Bldg) complete all as specified. |
| 20 | M&L Brick work with sub class \\"B\\" bricks , straight or curved on in half brick thick wall built in cement mortar (1:4),(up to seven story bldgs.) complete all as specified. |
| 21 | Dismantling of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in any mortar complete all as specified and directed |
| 22 | M & L for 18-20 mm thick Granite (of any type) tiles machine cut, as in cooking plateform, including screed bed or bedding layer of mortar 20mm thick in CM 1:4, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 23 | M&L for drilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite all as specified and directed. |
| 24 | M&L for Udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, and like including including 15mm thick screed bed in CM 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounded edges with shade of Udaipur green complete all as specified and directed. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 26 | M&L for, double charged, super glossy/ hi gloss vitrified tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed cement mortar (1:4) complete all as specified and as directed. |
| 27 | M&L for double charged super glossy/ hi gloss vitrified tiles (light shade) 8 to 10 mm thick (Square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size as in skirting laid on 10mm thick cement plaster in CM (1:3) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed. |
| 28 | M&L 600x600mm non skid ceramic tiles matt finished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 including scantling complete all as specified and directed. |
| 29 | M & L for supper gloss/ hi gloss vitrified tiles of approved colour and design in vertical surfaces 600mmx1200 mm including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:3 all as specified and directed. |
| 30 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed. |
| 31 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removal of debris from the MOD land complete all as specified and directed. |
| 32 | M&L for 15 mm thick rendering cement plaster in CM 1:4 on brick or conc surfaces(On external surfaces) even and fair finished without using extra cement incl necessary scafolding etc complete all as specified and directed. |
| 33 | M&L rendering 10 mm thick in CM 1:6 on internal brick/concrete wall surfaces of any description, and finishing the surfaces even and fair without using extra cement complete all as specified and directed . |
| 34 | M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information |
| 35 | M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender