Tender For Cleaning Of Drains And Repair/Maintenance Works, Including Covers, Hardstanding, Painting Grills, Grating, Iron/Ss/Plates, Railing Chains And Other Connected Items Of Marine Installations At Bombay Dock, Duncan Dock, Duncan Dock C G Dock,
Tender Value
90 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
26 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning Of Drains And Repair/Maintenance Works, Including Covers, Hardstanding, Painting Grills, Grating, Iron/Ss/Plates, Railing Chains And Other Connected Items Of Marine Installations At Bombay Dock, Duncan Dock, Duncan Dock C G Dock, Ibw Jetty, Acd Dock, Crusher Wharf, South Wharf And Other Associated Areas Of Naval Dockyard, Under Age B/R - I, Ge (Nw) Kunjali, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150 mm (internal dia of pipe) set in cement mortar all as specified and directed directed. |
| 2 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150 mm (internal dia of pipe) set in cement mortar all as specified and directed directed. |
| 3 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150 mm (internal dia of pipe) set in cement mortar all as specified and directed directed. |
| 4 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 300 mm (internal dia of pipe) set in cement mortar all as directed. |
| 5 | Cleaning & desilting of manholes depth not exc 1.50 mtr by pumping out/removing liquid waste/sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified and directed by Engr-in-Charge. |
| 6 | Cleaning & desilting of manholes depth excd 1.50 m but not excd 3.00 m by pumping out/removing liquid waste/sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc & removing the same(silt, sludge & other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules & regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified & directed by Engr-in-Charge. |
| 7 | Cleaning and desilting of sewage lines upto 150mm bore and sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed by Engr-in-Charge. (Note: Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured separately under appropriate item.) |
| 8 | Cleaning and desilting of sewage lines exc 150mm dia but n.exc 300 mm dia and sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed by Engr-in-Charge. (Note: Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured separately under appropriate item.) |
| 9 | Cleaning the chocks/blockages in AC/CI/PVC soil waste/rain water pipe of any dia by removing cleaning eye and re-fixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia complete all as specified and directed by Engr-in-Charge |
| 10 | Empting septic tanks and manholes of any depth by providing sewage suction vehicle of capacity 5000 ltrs(BMC Pattern) including necessray other arrangments such as sweepers to clean up the site after work and depositing the same at places earmarked outside MoD land upto 25 KM lead and lift complete one or more times all as specified and directed.Note:-(a) All precautions to be taken by all workers while working in foul condition,Contractor shall take all necessary actions.(b) After cleaning vehicle will be contractors's property.(c) Contractor accredated representive shall be availble during cleaning.(d) Complete process shall be completed in all respects within a day. |
| 11 | Cleaning and removal of foreign material from inside the Gully trap/WC Pan, Nahani trap, floor trap etc including removing & re-covering of RCC/CI cover and directly buried in the ground to a distance not exc. 50 m along with spreading of bleaching powder complete one or more times complete all as specified and directed. |
| 12 | Cutting out & removal of plants, roots, shurbs etc from the roof, brick/stone wall built in cement mortar & applying chemical GLYPHOSATE 41% SL (Soluble Liquid) mixed with water in the proportion of 1: 75, at the place to avoid re-growing of plants/roots & making good the disturbed portion of roof, wall with brick works in CM 1:3 at wall portion & PCC 1:2:4 at roof slab & matching the surface to existing finish like distemper cement base paint etc over 15mm thick rendering in CM 1:4 including disposal of demolished material/ waste out of M D land of Bldgall aspecified and direted by Engr-in-Charge. |
| 13 | M&L cleaning the existing drainage/culvert including removing cover slab, soils,spoils, vegetation, silt etc and refixing cover slab including making good and removing waste materials outside MoD Land all aspecified and direted by Engr-in-Charge. |
| 14 | M&L 150 mm dia (Internal diameter of pipe in mm) salt glazed stoneware drain pipes laid in trenches to maintan requied gradient and jointed as specified. |
| 15 | M&L 150 mm bore (Bore of pipe in mm) reinforced concrete pipes, class NP-2 laid in trenches to maintan requied gradient and jointed complete with collars all as specified & directed. |
| 16 | M&L 200 mm bore (Bore of pipe in mm) reinforced concrete pipes, class NP-2 laid in trenches to maintan requied gradient and jointed complete with collars all as specified & directed. |
| 17 | M&L 300 mm bore (Bore of pipe in mm) reinforced concrete pipes, class NP-2 laid in trenches to maintan requied gradient and jointed complete with collars all as specified & directed. |
| 18 | M&L for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone agg) to drain pipes 150 mm bore (Bore of pipe in mm) including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed. |
| 19 | M&L for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone agg) to drain pipes 200 mm bore (Bore of pipe in mm) including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed. |
| 20 | M&L for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone agg) to drain pipes 300 mm bore (Bore of pipe in mm) including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed. |
| 21 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed . |
| 22 | Excavating in trenches, n.exc 1.5 M wide and n.exc 1.5 M in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 M in depth and gettging out in hard dense soilscomplete all as specified and directed. |
| 23 | M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate ) as in foundations, filling and mass concrete, pot holes etc complete all as specified and directed. |
| 24 | M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate ) as in surface channels and drains all as specified and directed. |
| 25 | M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in foundations, filling and mass concrete, post holes, bed blocks etc all as specified and directed. |
| 26 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, with out using extra cement, including forms, moulds, mitred/stopped ends etc completeall as specified and direted, |
| 27 | Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 28 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified. |
| 29 | Providing precast reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in cement mortar 1:4 all as specified (reinforcement shall be measured & paid seperately). Make : As approved |
| 30 | M&L for RCC 1:2:4 nominal mix (20mm graded crushed stone agg) as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified and directed. |
| 31 | Use and waste of form work for flat rough finished surfaces of concrete to sides and soffits of floor or roof beams, beam haunchings , girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc also splays between floors and beams etc rough finished surface of concrete complete all as specified. |
| 32 | M&L for mild steel TMT (CRS) bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and incl mild Steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified. |
| 33 | All as per srl item No. 32 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified. |
| 34 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm in hard/dense soils all complete all as specified and directed. |
| 35 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removing debris out of MoD land complete all as specified and as directed. |
| 36 | M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 37 | M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 38 | M&L for stone walling of random rubble uncoursed, brought up to course well bonded, bedded and solidly hearted built in cement mortar 1:4 But except bricks complete all as specified and directed. |
| 39 | M&L for stone walling of random rubble uncoursed, brought up to course well bonded, bedded and solidly hearted built in cement mortar 1:4 but except stone all as specified and directed. |
| 40 | M&L for flush pointing to random rubble masonry in cement mortar 1:3, uncoursed or brought upto courses complete all as specified and directed. |
| 41 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 42 | M&L cement concrete rubber moulded coloured tiles of sice 25 cm x 25 cm x 22 mm thick, machine pressed (with grey cement and pigment), set jointed and pointed in neat cement slurry in floors and cut and polished over & including 15 mm thick screed bed layer in cement mortar 1:6 complete all as specified and directed. |
| 43 | M&L for 18-20mm thick granite stone slab of machine cut mirror polished in flooring , bedded and jointed with grey cementpaste and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM 1:4 complete all as specified. |
| 44 | M & L for 18-20 mm thick, machine cut,mirror polished Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20 mm thick screed bed in CM 1:6 complete all as specified. |
| 45 | M & L for 18-20 mm thick, machine cut,mirror polished Kota stone slab, as in riser of steps, landing, skirting, dado and pillar etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified. |
| 46 | Demolition of cement concrete as in ground floors or Concrete of any description and in any position and removing debris out of MoD land for, complete all as specified and directed. |
| 47 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 25 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 48 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M 40 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 25 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 49 | Taking down interlocking paver block from the existing surfaces and refixing them in same place after filling depression with fine sand and re-laid the pavers over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified. |
| 50 | M L Plain cement concrete 1:3:6 Type C1 using (20mm graded stone aggregate ) in roof kerbs or mud stops, rounded or chamfered on edges finished surfce even and smooth with out using extra cement complete all as specified and as directed |
| 51 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in sub base complete all as specified and directed.. |
| 52 | Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed. |
| 53 | S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walki ways, railings, frame work for water tanks and similar work including cutting welding etc conforming to Fe 290 Gd E-165 all as specified . |
| 54 | Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes gate stops, parts of ranges, balusters and similar articles exc 5 Kg Each including cutting, welding etc complete all as specified and directed. |
| 55 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.. |
| 56 | Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately) complete all as specified and directed. |
| 57 | Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified. |
| 58 | M&L plastering 10mm thick in CM 1:3 in ceiling finishing even and smooth without using extra cement complete all as specifiedand directed |
| 59 | M&L for madrasidana plaster on exterior walls in two layers, under and incl layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. |
| 60 | M&L for preparation of old surfaces of wall and applying Apex Createx-Dholpur textured finish (4 to 6mm thick) on walls over two coat of Asian Apex Ultima on it with including finishing the uneven surfaces of wall with plaster complete all as specified and directed (Make : Asian Apex Createx-Dholpur textured or Techno commercial equivalant as approved ) NOTE : (1) Necessary scafolding for walls is included & complete all as specified and as directed(2) out side area of walls to be covered with plastic/ tarpaulin.(3) All the safety precautions adopted by the contractor at the side.(4) All the passes will be submitted by the contractor after completion of the work.Contractor are bound to accept the above instructions, if fails to follow the instructios, punishable/ charges applicable which is decided by the Engr-in- Charge. |
| 61 | Supply only integral water proofing compound ISI marked complete all as specified and directed. |
| 62 | Taking down eaves gutters and PVC rainwater pipes (any size or pattern) incl all fittings, heads, shoes, bends, swanecks etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and direted |
| 63 | Dismantling of cast iron or reinforced concrete drain pipes of any dia fixed to wall complete all as specified and directed. |
| 64 | Supply & fixing 160 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall of approved shape and size approved by GE at any height, any location, with dash through fasteners and rain water bracket suitable for 160mm pipes spacing 1.5 c/c as per CE Navy Mumbai TD/2023/01 including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Supply & fixing 100 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall of approved shape and size approved by GE at any height, any location, with dash through fasteners and rain water bracket suitable for 160mm pipes spacing 1.5 c/c as per CE Navy Mumbai TD/2023/01 including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Supply & fixing 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall of approved shape and size approved by GE at any height, any location, with dash through fasteners and rain water bracket suitable for 160mm pipes spacing 1.5 c/c as per CE Navy Mumbai TD/2023/01 including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F in repairs 160 mm dia bore PVC (SWR) bends, ' with access doors any radius including fixing clips complete all as specified and as directed . |
| 68 | S&F in repairs 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as directed. |
| 69 | S&F in repairs 75 mm dia bore PVC (SWR) bends, ' with access doors any radius including fixing clips complete all as specified and as directed . |
| 70 | S&F in repairs 160 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as directed. |
| 71 | S&F sand cast type 100 mm bore cast iron soil, waste and vent pipes ISI marked in any length with or without ears, with cement joints, laid in trenches or in floors all as specified. |
| 72 | S&F sand cast type 100 mm bore cast iron soil, waste and vent pipes ISI marked n any length with or without ears, with cement joints, but fixed to walls all as specified. |
| 73 | S&F sand cast type 75 mm bore cast iron soil, waste and vent pipes ISI marked in any length with or without ears, with cement joints, fixed to walls all as specified. |
| 74 | S&F in repairs 100 mm bore cast iron bend ISI marked , diminishing pieces or tapers (larger bore measured) all as specified. |
| 75 | S&F in repairs 75 mm bore cast iron bend ISI marked, diminishing pieces or tapers (larger bore measured) all as specified. |
| 76 | S&F in repairs 75 mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 77 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land |
| 78 | M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.: Make as approved |
| 79 | M&L for coloured glazed ceramic tiles 450x300x7 mm thick on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3 Make : As approved |
| 80 | S&F Non - skid coloured ceramic tiles of size 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cemert to match including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed. Make : As approved |
| 81 | M&L vitrified ceramic tiles 9-10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed in CM 1:4 complete all as specified and directed |
| 82 | M&L vitrified ceramic tiles 09- 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in Dado, skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed in CM 1:4 complete all as specified and directed |
| 83 | S&F vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed. |
| 84 | S & F in repairs Vitreous china water closet pan (pedestal pattern), white including fixing bolts, including plastic seat and cover but excluding flushing systern and mild steel chromium plated hinging device complete all as directed. |
| 85 | S & F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.seat and cover (excluding flushing cistern & flush pipe) complete in all respect all as specified, complete all as directed. |
| 86 | S & F in repairs plastic water closet seat cover, black or white closed pattern with flat bottom and cover and mild steel chromium plated hinging device. |
| 87 | S&F in repairs water closet (One piece) including connection to drain (out going pipe) and to flushing pipe anti syphonage pipe etc seat cover and all joints, making good to the floor complete all as specified and as directed. |
| 88 | S & F in repairs PVC valve less flushing cistern syphonic action type, low level, inlet, ball valve, float & handle 10 litre capacity including brackets, flush pipe and all accessories all as directed. |
| 89 | S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complte all as specified and directed. |
| 90 | Taking down 15 mm bore GI water tubing complete with all fittings complete all as specified and directed. |
| 91 | Taking down 20 mm bore GI water tubing complete with all fittings complete all as specified and directed. |
| 92 | S&F GI tubing medium grade ISI marked with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed. |
| 93 | S&F GI tubing medium grade ISI marked with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed. |
| 94 | Taking down old steel tubing/PP-R pipes & connection including cleaning for refixing for 20/25 mm bore pipe complete all as specified |
| 95 | Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/ walls/cellings or laying in floors complete of size outer dia 20 mm ,including fittings |
| 96 | Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/ walls/cellings or laying in floors complete of size outer dia 25 mm ,including fittings |
| 97 | M&L for cement concrete 1:2:4 type B-1 ( 20 mm graded crushed stone aggregate ) as in foundation, filling and mass concrete complete all as specified and direted. |
| 98 | Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of alkali resistant primer including applying 3mm thick wall care putty complete all as specified and directed. |
| 99 | M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 100 | M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etccomplete all as specified and directed. |
| 101 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc complete all as specified and directed. |
| 102 | M&L Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scafolding for high rise bldgs. etc complete all as specified and directed. |
| 103 | M&L preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified and directed. |
| 104 | Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down and applying two coats of oil emulsion distemper over a coat 1 to 2 mm thick wall care putty (JK/Birla ) and one coat of alkali resistant primer incl preparatiomn of surfaces complete all as specified and directed. |
| 105 | M&L for preparation of old distempered surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and direted Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender