Tender For Repair/Replacement And Maintenance Of Ac Plant (Ot & Icu) And Their Connected Works And Repair/Maint Of Mechanical Transport Vehicle Eicher, Tata Xenon, Tata 207Di, Maruti Suzuki Desire Lxi, Maruti Suzuki Eritiga, Motorcycles Under Age E/M
Tender Value
34 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
21 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement And Maintenance Of Ac Plant (Ot & Icu) And Their Connected Works And Repair/Maint Of Mechanical Transport Vehicle Eicher, Tata Xenon, Tata 207Di, Maruti Suzuki Desire Lxi, Maruti Suzuki Eritiga, Motorcycles Under Age E/M At Ge Jhansi
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for servicing of central / package type air conditioning plant of capacity 3 x 5.5 TR (Make: Bluestar) by carefully dismantling the unit (without making any damage), at installed location, removing filters, applying blower to remove all dust, cleaning, washing, removing dirt, washing and cleaning of evaporator including dismantling condenser unit and cleaning all condensing tubes and replacing gasket, nut, bolt, washers etc as per site requirement, re-assembling the dismantled components, refixing to its original position and testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for servicing of central / package type air conditioning plant of capacity 3 x 11 TR (Make: Bluestar) by carefully dismantling the unit (without making any damage), at installed location, removing filters, applying blower to remove all dust, cleaning, washing, removing dirt, washing and cleaning of evaporator including dismantling condenser unit and cleaning all condensing tubes and replacing gasket, nut, bolt, washers etc as per site requirement, re-assembling the dismantled components, refixing to its original position and testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material and labour for descaling of central / package type air conditioning plant of capacity 3 x 5.5 TR (Make: Bluestar) by running descaling compound for not less than 6 hours through pump and testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for descaling of central / package type air conditioning plant of capacity 3 x 11 TR (Make: Bluestar) by running descaling compound for not less than 6 hours through pump and testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and labour for gas charging of central / package type air conditioning unit of capacity 5.5 TR (Make: Bluestar) with R - 22 or any other recommended refrigerant gas, including detecting of leakage, repairing using welding / brazing, pressure testing, replacement of connection lead, tin coated copper thimbles etc and testing for proper cooling including six month top up warranty etc complete all as specified and directed and by Engineer-in-Charge. |
| 6 | Material and labour for gas charging of central / package type air conditioning unit of capacity 11 TR (Make: Bluestar) with R - 22 or any other recommended refrigerant gas, including detecting of leakage, repairing using welding / brazing, pressure testing, replacement of connection lead, tin coated copper thimbles etc and testing for proper cooling including six month top up warranty etc complete all as specified and directed and by Engineer-in-Charge. |
| 7 | Supply and Fix Hermetically sealed scroll compressor unit 5.5 TR capacity including gas charging with recommended refrigerant of required quantity complete |
| 8 | Supply and fix in replacement of HP / LP cut out unit suitable for Central / package type air conditioning plant of capacity 5.5 TR / 11 TR of Bluestar make, AC, 3 Phase, 50 Hz, of existing model complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply and fix in replacement of Single phase Transformer 230V AC / 13 V AC, 500 mA suitable for Central / package type air conditioning plant of capacity 5.5 TR / 11 TR of Bluestar make, AC, 3 Phase, 50 Hz, of existing model complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply and fix in replacement of Four pole,12 to 63 Amp 415 V, 50Hz rupturing capacity 25 kA suitable for Central / package type air conditioning plant of capacity 5.5 TR / 11 TR of Bluestar make, AC, 3 Phase, 50 Hz, of existing model complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply and fix in replacement of Four pole power contactor up to 60 Amp, 415 V, 50Hz suitable for Central / package type air conditioning plant of capacity 5.5 TR / 11 TR of Bluestar make, AC, 3 Phase, 50 Hz, of existing model complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply and fix in replacement of Thermal overload relay suitable for Central / package type air conditioning plant of capacity 5.5 TR / 11 TR of Bluestar make, AC, 3 Phase, 50 Hz, of existing model complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and fix in replacement of 2NC +2 NO auxiliary contactors of 32 Amp suitable for Central / package type air conditioning plant of capacity 5.5 TR / 11 TR of Bluestar make, AC, 3 Phase, 50 Hz, of existing model complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply and fix in replacement of Copper expansion valve suitable for Central / package type air conditioning plant of capacity 5.5 TR / 11 TR of Bluestar make, AC, 3 Phase, 50 Hz, of existing model complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply and fix in replacement of Refrigerant filter drier suitable for Central / package type air conditioning plant of capacity 5.5 TR / 11 TR of Bluestar make, AC, 3 Phase, 50 Hz, of existing model complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and fix in replacement of 'V' belt for blower motor suitable for Central / package type air conditioning plant of capacity 5.5 TR / 11 TR of Bluestar make, AC, 3 Phase, 50 Hz, of existing model complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply and fix in replacement of Mild Steel Pipes heavy grade with all fittings such as socket, coupling, bend, Tee, reducer etc laid in floors or fixed to walls and ceilings etc of size 25mm dia nominal bore, plain end as per IS:1239 (I), including cutting, welding, threading and joining etc as per site requirement and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer including taking up / down of existing unserviceable pipe of any description complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and fix in replacement of Mild Steel Pipes heavy grade with all fittings such as socket, coupling, bend, Tee, reducer etc laid in floors or fixed to walls and ceilings etc of size 40mm dia nominal bore, plain end as per IS:1239 (I), including cutting, welding, threading and joining etc as per site requirement and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer including taking up / down of existing unserviceable pipe of any description complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply and fix in replacement of Mild Steel Pipes heavy grade with all fittings such as socket, coupling, bend, Tee, reducer etc laid in floors or fixed to walls and ceilings etc of size 65mm dia nominal bore, plain end as per IS:1239 (I), including cutting, welding, threading and joining etc as per site requirement and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer including taking up / down of existing unserviceable pipe of any description complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and fix in replacement of Mild Steel Pipes heavy grade with all fittings such as socket, coupling, bend, Tee, reducer etc laid in floors or fixed to walls and ceilings etc of size 80mm dia nominal bore, plain end as per IS:1239 (I), including cutting, welding, threading and joining etc as per site requirement and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer including taking up / down of existing unserviceable pipe of any description complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply and fix MS slip-on weldable flange suitable for 65mm / 80mm NB pipe complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and labour for flange joint with rubber or fibre board gasket including suitable bolts, nuts and washers for 65mm / 80 mm NB ( Nominal Bore) pipe complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fix in replacement of CI Butterfly valve of size 40mm nominal bore as per IS 13095, PN 16, wafer type without lugs, suitable for clamping between flanges as per ANSI B 16.1 CI-125, including flanges, fittings, gasket, nuts, bolts, washers etc. including taking up / down of existing unserviceable butterfly valve of any description complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply and fix in replacement of CI Butterfly valve of size 65mm nominal bore as per IS 13095, PN 16, wafer type without lugs, suitable for clamping between flanges as per ANSI B 16.1 CI-125, including flanges, fittings, gasket, nuts, bolts, washers etc. including taking up / down of existing unserviceable butterfly valve of any description complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply and fix in replacement of CI Butterfly valve of size 80mm nominal bore as per IS 13095, PN 16, wafer type without lugs, suitable for clamping between flanges as per ANSI B 16.1 CI-125, including flanges, fittings, gasket, nuts, bolts, washers etc. including taking up / down of existing unserviceable butterfly valve of any description complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply and fix in replacement of Cast Iron Non Return Valve (NRV) of size 65mm NB with flanged ends swing type / ball type ISI marked including necessary packing material, bolts, nuts and washers complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply and fix in replacement of Cast Iron Non Return Valve (NRV) of size 80mm NB with flanged ends swing type / ball type ISI marked including necessary packing material, bolts, nuts and washers complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply and fix in replacement of dial type pressure gauge 0-14 Kg / Cm2 with all fixing accessories complete all as specified and directed and by Engineer-in-Charge. |
| 29 | Supply and fix in replacement of vertical scale type dual scale (°F & °C) hot water thermometer with all fixing accessories suitable for fixing on hot water pipe line in central air conditioning plant complete all as specified and directed and by Engineer-in-Charge. |
| 30 | Supply and fix in replacement of forged brass ball valve of size 25mm NB with screwed female ends complete all as directed. |
| 31 | Material and labour in replacement of duct insulation with resin bonded fibre glass wool roll of density 24 kg/Cum, with factory laminated aluminium vapour barrier, thickness of insulation 25mm and including the following:-(a) Material & Labour for cleaning the duct surface (to be insulated ) by scrapping carefully with wire brush etc. to make the surface completely free of mill scale, dirt, dust, grease and other foreign materials, taking special care so that all duct joints are sealed against any leakage.(b) Material & Labour for applying rubber based adhesive CPRX compound.(c) Material & Labour for sealing of all longitudinal joints and circular overlaps with and including Aluminium foil tape 50 mm wide, to make the insulation leak proof.(d) Material & Labour for securing the insulation with and including mechanically fastened nylon/ steel straps of size 12 mm/50 mm at maximum intervals of 1.2 meter. |
| 32 | Supply, assemble and erection in replacement of HVAC duct, GI sheet with TDF flange rectangular/square duct made out of 'L' shaped hollow profile, duly factory boxed, including all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete of size 26 Gauge all as specified and as directed by Engineer-in-Charge. |
| 33 | Supply and fix in replacement of finned strip heater, 3 KW, 230 Volts, 50 Hz, made of Stainless Steel, GP Sheathing having the heat Resistance Chrome nickel 80/20 heating element protected under the best insulation to avoid the leakage of current and to ensure the long life of the heaters. Finns to increase the output of heat to the maximum dissipation and having screw type terminals on one end for proper connection complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply, connecting and testing in replacement of Stranded Annealed Bare Copper Conductor /950° Mica Tape Wrapped/XLPE Insulation/Cores Laid up together/Fibre Glass Tape Wrapped/FRLS Inner Sheathed/GI Wire Strip Armoured/ FRLS Outer sheathed Fire Survival Cable of size 4 core x 10 sqmm complete all as specified and directed by Engineer-in-Charge. |
| 35 | Removing of Monoblock electric driven water pump set of any make and capacity up to 5 HP from its installed position by disconnecting suction and delivery lines, fixing dummy plate to both suction & delivery pipe, disconnecting electrical cables, earth strips and dismounting the pump and motor from base channel and shifting to civil workshop for Overhauling of pump set by opening the pump and motor, replacing the worn out/defective spare parts, making good of shaft and shaft sleeve, cleaning internally, lubricating the rotating parts, reassembling the pump and motor duly replacing the all the packing material, 'O' rings, worn out bolts, nuts, washers etc and bringing back and reinstalling in its original position, checking alignment, reconnecting the water mains and electric connections and testing on completion for satisfactory performance complete all as directed. Note: Rewinding of motor and spare parts required shall be measured and paid separately under relevant items of BOQ. |
| 36 | Cutting and removing burnt out winding from electric motor of any make up to 5 HP and rewinding with super enamelled copper winding wire of existing gauge and number of turns including varnishing, heating etc and testing for satisfactory performance complete all as specified and directed. |
| 37 | Supply and fix in replacement of ball bearing suitable for Monoblock pump set of any make and capacity up to 5 HP all as per sample suitable for existing model of pump set and as specified and directed. |
| 38 | Material and labour for preparation of old painted steel surfaces of Monoblock pump set of capacity up to 5 HP and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply and fix MCCB 160A, 3 Pole, 36 KA with adjustable thermal magnetic setting (Ics = 100% Icu) with sheet steel enclosure with built in neutral link including connecting up incoming and outgoing cables with suitable stainless steel cable glands and aluminium cable lugs and fixing on wall surfaces including taking down existing unserviceable main switch of any description complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply and fix MCCB 200A, 3 Pole, 36 KA with adjustable thermal magnetic setting (Ics = 100% Icu) with sheet steel enclosure with built in neutral link including connecting up incoming and outgoing cables with suitable stainless steel cable glands and aluminium cable lugs and fixing on wall surfaces including taking down existing unserviceable main switch of any description complete all as specified and directed by Engineer-in-Charge. |
| 41 | Material and labour for servicing of walk-in-collar of capacity 2.0 TR, of Bluestar make, in situ at installed location, removing power connection, carefully opening the indoor and outdoor unit, removing filters, applying blower in both the units to remove all dust, cleaning, washing, removing dirt, including cleaning and washing of evaporator coil of indoor cooling unit and condenser coil of outdoor unit, re-assembling the dismantled components, refixing to its original position and testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply and fix in replacement of blower fan motor, 75W (1/10 HP), 230V, 50Hz, 1 ph, AC with 900 RPM speed, copper wound complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fix in replacement of Hermetically sealed reciprocating type CR 30 compressor unit 2.0 TR capacity including gas charging complete suitable for walk-in-cooler of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 44 | Supply and fix in replacement of refrigerant filter drier suitable for walk-in-cooler of capacity 2.0 TR existing model complete all as specified and directed and by Engineer-in-Charge. |
| 45 | Supply and fix in replacement of PCB with display unit suitable for existing model Central / package type air conditioning unit of capacity 5.5 TR / 11 TR / walk-in-cooler of capacity 2.0 TR complete all as specified and directed and by Engineer-in-Charge. |
| 46 | Supply and fix in replacement of complete set of PVC honeycomb fills and eliminators suitable for Delta Cooling Tower of central type air conditioning plant of capacity 3 x 5.5 TR / 3 x 11.0 TR complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply and fix in replacement of Aluminium Rotary Sprinkler suitable for Delta Cooling Tower of central type air conditioning plant of capacity 3 x 5.5 TR / 3 x 11.0 TR complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fix in replacement of Aluminium Fan suitable for Delta Cooling Tower of central type air conditioning plant of capacity 3 x 5.5 TR / 3 x 11.0 TR complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fix in replacement of Rotary Switch (90° operation complete rotation), 4 pole ON-OFF, 32 Amps rating, motor duty switch suitable for panel mounting complete all as specified and as directed by Engineer-in-Charge. |
| 50 | Supply and fix in replacement of Rotary Switch (90° operation complete rotation), 4 pole ON-OFF, 63 Amps rating, motor duty switch suitable for panel mounting complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Material & Labour for Servicing of window type AC 1.5 / 2.0 TR capacity, any type/make, by carefully taking down from window / wall, removing power connection, front PVC grill, air filters and applying air blower to remove all dust, washing, cleaning, removing dirt, including cleaning and washing of cooling and condenser coil, re-assembling the dismantled components, refixing to its original position and testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 52 | Material & Labour for servicing of split type AC of 1.5 / 2.0 TR capacity, any type/make, in situ at installed location, removing power connection, carefully opening the indoor and outdoor unit, removing filters, applying blower in both the units to remove all dust, cleaning, washing, removing dirt, including cleaning and washing of evaporator coil of indoor cooling unit and condenser coil of outdoor unit, re-assembling the dismantled components, refixing to its original position and testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and fix in replacement of set of PVC filters suitable for window type AC / indoor unit of split type AC 1.5 Ton / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 54 | Supply and fix in replacement of Blower bush suitable for indoor unit of split type AC 1.5 Ton / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 55 | Supply and fix in replacement of Blower fan blades suitable for indoor unit of split type AC 1.5 Ton / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 56 | Supply and fix in replacement of Blower motor suitable for indoor unit of split type AC 1.5 Ton / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 57 | Supply and fix in replacement of PCB suitable for indoor unit of split type AC 1.5 Ton / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 58 | Supply and fix in replacement of Display unit suitable for indoor unit of split type AC 1.5 Ton / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 59 | Supply and fix in replacement of Swing motor suitable for indoor unit of split type AC 1.5 Ton / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 60 | Supply and fix in replacement of Capacitor 1.0 mdf to 2.5 mfd suitable for blower motor for indoor unit of split type AC 1.5 Ton / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 61 | Supply and fix in replacement of Remote control unit suitable for indoor unit of split type AC 1.5 Ton / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 62 | Supply and fix in replacement of suction / discharge valve, brass, of size 1/4'' to 3/4'' suitable for outdoor unit of split type AC 1.5 Ton / 2.0 TR capacity / suction / discharge valve of package type AC plant of existing model suitable for 5.5 TR / 11 TR capacity / walk-in-cooler of capacity 2.0 TR complete all as specified and directed and by Engineer-in-Charge. |
| 63 | Supply and fix in replacement of thermostat temperature sensor suitable for indoor unit of split type AC / window type AC 1.5 Ton / 2.0 TR capacity of existing model / package type AC plant of existing model suitable for 5.5 TR / 11 TR capacity / walk-in-cooler of capacity 2.0 TR complete all as specified and directed and by Engineer-in-Charge. |
| 64 | Supply and fix in replacement of PCB with display unit suitable for window type AC 1.5 TR / 2.0 TR capacity of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 65 | Supply and fix in replacement of Hermetically sealed reciprocating type / rotary type compressor unit 1.5 TR capacity including gas charging complete suitable for window type / outdoor unit of split type Air conditioners of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 66 | Supply and fix in replacement of Hermetically sealed reciprocating type / rotary type compressor unit 2.0 TR capacity including gas charging complete suitable for window type / outdoor unit of split type Air conditioners of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 67 | Supply and fix in replacement of Running capacitor 35 mfd to 60 mfd suitable for window type / outdoor unit of split type Air conditioners of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 68 | Supply and fix in replacement of Fan motor, copper wound suitable for window type / outdoor unit of split type Air conditioners of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 69 | Supply and fix in replacement of Fan blades suitable for window type / outdoor unit of split type Air conditioners of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 70 | Supply and fix in replacement of Fan capacitor 4.0 mfd to 6.0 mfd suitable for window type / outdoor unit of split type Air conditioners of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 71 | Supply and fix in replacement of Flair nuts of suitable sizes of existing unit suitable for window type / outdoor unit of split type Air conditioners of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 72 | Supply and fix in replacement of copper condenser coil suitable for outdoor unit of 1.5 / 2.0 TR capacity split type / window type Air conditioners of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 73 | Supply and fix in replacement of single phase contactor suitable for 1.5 / 2.0 TR capacity split type Air conditioners / Walk-in-cooler of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 74 | MOTOR VEHICLE REPAIR |
| 75 | Material & Labour for complete maintenance and servicing the vehicle all type of two wheeler by washing, polishing and top up engine oil, gear oil and replacing filter/filters and greasing at all joints , door adjustment, wheel balancing etc complete all as specified and directed . Note : The replacement of spare parts/oil if required as per OEM shall be paid under relevant of Schedule items |
| 76 | Material & Labour for complete maintenance and servicing the vehicle Eicher (02 No) / Tata LPT (01 No) by washing, polishing and top up engine oil, gear oil and replacing filter/filters and greasing at all joints , door adjustment, wheel balancing etc complete all as specified and directed . Note : The replacement of spare parts/oil if required as per OEM shall be paid under relevant of Schedule items |
| 77 | Material & Labour for complete maintenance and servicing the vehicle Tata Xenon (02 No) /Swift Dzire (02 No) / Maruti Eeco (01 No) / Ertiga (01 No) by washing, polishing and top up engine oil, gear oil and replacing filter/filters and greasing at all joints , door adjustment, wheel balancing etc complete all as specified and directed . Note : The replacement of spare parts/oil if required as per OEM shall be paid under relevant of Schedule items |
| 78 | Repairs to wheels by replacing of the following U/S items with new ones of brake system of Tata Xenon(02 No) / Swift Dzire (02 No) / Eeco (01 No)/ Ertiga (01 No) complete including taking down, dismantling, assembling and refitment etc after repair and testing etc (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 79 | Supply Brake disc pad set |
| 80 | Supply only Brake disc assy front |
| 81 | Supply only Rear brake lining set |
| 82 | Supply only Rear brake wheel cylinder assy |
| 83 | Supply only Brake booster assy |
| 84 | Supply only Tandem brake master cylinder assy |
| 85 | Supply only Rear wheel brake drum |
| 86 | Supply only front brake wheel cylinder assy |
| 87 | Supply only brake pipe of given length |
| 88 | Repair / Replacement of old unserviceable Electrical wiring with copper conductor flexible cable including taping after testing all the light in functional condition, including replacement of following unserviceable parts with new ones of Tata Xenon (02 No)/ Swift Dzire (01No)/ Eeco (01No) all as specified & directed (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 89 | Supply only Head light assy set |
| 90 | Supply only Head light bulb set |
| 91 | Supply only Tail light assy set with bulb |
| 92 | Supply only Indicator lamp assy front/rear set |
| 93 | Supply only Head light relay |
| 94 | Supply only Wiper blade set |
| 95 | Supply only Wiper motor |
| 96 | Supply only Horn assy set |
| 97 | Supply only Horn relay |
| 98 | Taking out clutch system from the Tata Xenon (02 No)/ Swift Dzire (02 No)/ Ertiga (01 No) / Eeco (01 No) and checking the serviceability of following items and replace the U/S part to new ones with proper fixing as existing place after repair and testing as specified and directed (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 99 | Supply only Clutch plate |
| 100 | Supply only Clutch released bearing |
| 101 | Supply only Clutch cylinder assy upper/lower set |
| 102 | Supply only Clutch frog with spring |
| 103 | Supply only Clutch hub |
| 104 | Supply only Differential housing |
| 105 | Supply only clutch cable set |
| 106 | Supply only pressure plate |
| 107 | Dismantling the wheel of Tata Xenon (02 No)/ Swift Dzire (02 No)/ Ertiga (01 No)/ Eeco(01 No) and cleaning, greasing, oiling & checking the serviceability of wheel bearings for Front/Real Wheel and replacing the unserviceable parts with new ones of Wheel hub bearing front outer( 02 Nos),front inner( 02 Nos),oil seal (4 Nos) complete and refitment after repair all as specified and directed by Engineer-in-charge. (Note:- Cost of labour and spare parts shall be deemed to include in the quoted for this item) |
| 108 | Taking out clutch system from the Eicher and checking the serviceability of following items and replace the U/S part to new ones with proper fixing as existing place after repair and testing as specified and directed.(Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 109 | Supply only Clutch plate |
| 110 | Supply only Clutch released bearing |
| 111 | Supply only Clutch cylinder assy upper/lower set |
| 112 | Supply only Clutch frog with spring |
| 113 | Supply only Clutch hub |
| 114 | Supply only Differential housing |
| 115 | Supply only pressure plate |
| 116 | supply only clutch cable set |
| 117 | Dismantling the gear box from the engine by separating ignition spark, open the gear box assembly checking the serviceability of parts and replacing the following parts of TATA Xenon (02 No) / Swift Dzire (01 No)/ Ertiga (01 No) filling the oil and testing gear box complete and refitment after repair all as specified and directed.(Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 118 | Supply only Gear box main shaft |
| 119 | Supply only Gear box counter shaft |
| 120 | Supply only Synchronising ring |
| 121 | Supply only gear box shifter sleeve assy |
| 122 | Supply only Gear box needle bearing |
| 123 | Supply only Gear box shifter shaft assy |
| 124 | supply only helical gear 1st |
| 125 | supply only helical gear 2nd |
| 126 | supply only helical gear 3rd |
| 127 | supply only helical gear 4th |
| 128 | Supply only Gear box engaging gear (5 th/Reverse speed) |
| 129 | Supply only Gear box oil seal front /rear set |
| 130 | Supply only Gear Box peaking kit |
| 131 | Supply only top cover assy |
| 132 | Material & Labour for replacing the seat covers suitable for Vehicle TATA Xenon (02 No)/ Swift Dzire (02 No)/ Ertiga (01 No)/ Eeco(01 No) with superior quality rexin with foam sheet for front and back seat complete with side door panels complete all as specified and directed by Engr-in-Charge. |
| 133 | Material & Labour for replacing the seat covers suitable for Vehicle Eicher (02 No)/ Tata (01 No) with superior quality rexin with foam sheet for front and back seat complete with side door panels complete all as specified and directed by Engr-in-Charge. |
| 134 | Taking down fuel injection pump assy and dismantling FIP, injector and replacement of U/S parts of Tata Xenon (02 No)/ Swift Dzire (01 No)/ Ertiga (01 No) / Eeco (01 No) with calibration at admissible pressure and refixed at original position after repair all as per specified and directed by Engr-in-Charge(Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 135 | Supply only FIP plunger element, delivery valve, base cap (set of 4) |
| 136 | Supply only FIP oil seal ,RSV kit, cam shaft assy |
| 137 | Supply only T-Quadrant, T-Bush, T-Roller(Set of Four) |
| 138 | Supply only control rod, control lever |
| 139 | Supply only Ball Bearing(Set of two) |
| 140 | Supply only injector nozzle element, Nozzle holder assy(Set of four) |
| 141 | Dismantling the rear differential axle system from the Tata Xenon (02 No) / Eicher (01 No) and checking the serviceability of following parts, replace the U/S parts and refixing at proper place after the repair as specified and directed.(Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 142 | Supply only Differential crown Wheel pinion set |
| 143 | Supply only Differential Housing |
| 144 | Supply only Differential bevel pinion |
| 145 | Supply only Differential pinion tapper roller bearing inner |
| 146 | Supply only Differential pinion tapper roller bearing outer |
| 147 | Supply only Rear axle shaft assy |
| 148 | Supply only Rear axle bearing |
| 149 | Dismantling both left side door, right side door locks from the door checking the serviceability of locks and replacing the following U/S parts fitting and refix at existing place after repair for Tata Xenon all as specified and directed (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 150 | Supply only Door lock assy |
| 151 | Supply only Door channel set |
| 152 | Supply only Door glass beeding set |
| 153 | Supply only Door Rubber set |
| 154 | Supply only Door handle outer |
| 155 | Supply only Door glass handle |
| 156 | Supply only Door lock remote assy |
| 157 | Supply only Door dust rubber set |
| 158 | Dismantling complete electrical system, checking the serviceability of parts of M/C Hero Honda Delux/ Bajaj Platina approx 100cc capacity complete and replace the unserviceable part with new ones by changing Head light , lamp assy set with holder switch including lamp with proper cover(1 set), wiring cruising harness assy set(1 set) ,ignition relay(1 set) ,Back light assy set complete with holder switch including lamp with proper cover(1 set),indicator lamp assy set front/rear(1 set) and other minor part and refitment of all electric connection after repair all as specified and directed. (Note:- Cost of labour and spare parts shall be deemed to include in the quoted for this item) |
| 159 | Supply only Brake Oil DOT 3 Make: TVS/KBX |
| 160 | Supply only Gear Oil 80W90 Make - Castrol/ Mak/ Servo super |
| 161 | Supply only Differential Oil Make - Castrol/ mak/ Servo super |
| 162 | Supply only Grease of OEM Multipurpose Make - Castrol/ mak/ Servo super |
| 163 | Supply only best quality glass screen cleaner |
| 164 | Supply only best quality dash board polish |
| 165 | Supply only Car shampoo With Extra Foaming For Car Care and Cleaning |
| 166 | Supply only distilled water |
| 167 | Supply only Coolant Make MAK/Castrol/Deluxe/TVS |
| 168 | Supply only Oil filter Tata Xenon / Swift Dzire / Eeco / Ertiga |
| 169 | Supply only Fuel Filter Tata Xenon / Swift Dzire / Eeco / Ertiga |
| 170 | Supply only Air Filter Tata Xenon / Swift Dzire / Eeco / Ertiga |
| 171 | Supply only Oil filter Eicher canter 10.75 |
| 172 | Supply only Fuel Filter Eicher canter 10.75 |
| 173 | Supply only Air Filter Eicher canter 10.75 |
| 174 | Supply and fix in replacement of front and rear mud guard as per sample suitable for Hero Honda (02 No)/ Bajaj Platina (04) motor cycle of approx 100 CC capacity complete all as specified and directed |
| 175 | Material & Labour for complete maintenance and servicing the vehicle HERO HONDA SPLENDER 100 CC & PLATINA 100CC by washing, polishing and top up engine oil, gear oil and replacing filter/filters and greasing at all joints , door adjustment, wheel balancing etc complete all as specified and directed . Note : The replacement of spare parts/oil if required as per OEM shall be paid under relevant of Schedule items |
| 176 | Dismantling complete brake system rear and front wheel and checking the serviceability of brake shoe, cleaning the brake disc assembly of Hero Honda and Bajaj Platina complete by supply & fix in replacement Rear Wheel brake shoe set(1 set) , Rear Wheel brake rubber set(1 set) ,Foot rest rubber set (Rear & Front)(1 set) , Rear shock absorber(1 nos) ,Brake lever with spring(1 nos) ,Brake cable (Inner & Outer ) (1 nos) and refixing to original position complete all as specified and directed by Engineer-in-charge (Note:- Cost of labour and spare parts shall be deemed to include in the quoted for this item) |
| 177 | Material & Labour Repairing of the gear box from the engine by separating ignition spark, open the gear box assembly checking the serviceability of parts and replacing the Gear Spring (1 set) , Kicker spring(1 set) , Gear speed 3rd &4rt (1 set) ,Gear box packing Kit(1 set) , Pressure plate (1 set) ,Clutch plate (1 set) of M/C Hero Honda (03 No)/ Bajaj Platina (02 No) ,filling the oil and testing gear box complete and refitment after repair all as specified and directed by Engineer-in-charge.(Note:- Cost of labour and spare parts shall be deemed to include in the quoted for this item) |
| 178 | Repairs to wheels by replacing of following U/S items with new ones of brake system of Eicher complete including taking down, dismantling, assembling and refitment etc after repair and testing etc (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 179 | Supply only brake disc assy front |
| 180 | Supply only Rear brake lining set |
| 181 | Supply only Rear brake wheel cylinder assy |
| 182 | Supply only Front brake wheel cylinder assy |
| 183 | Supply only Tandem brake master cylinder assy |
| 184 | Supply only Brake booster assy |
| 185 | Supply only Rear wheel brake drum |
| 186 | Supply only brake pipe of given length |
| 187 | Replacement of old unserviceable Electrical wiring completely and provided with new electric wiring with copper conductor flexible cable including taping after testing all the light in functional condition, including replacement of following unserviceable parts with new ones of Eicher all as specified & directed (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 188 | Supply only Head light assy set |
| 189 | Supply only Head light bulb set |
| 190 | Supply only Tail light assy set with bulb |
| 191 | Supply only Indicator lamp assy front/rear set |
| 192 | Supply only Head light relay |
| 193 | Supply only Wiper blade set |
| 194 | Supply only Wiper motor |
| 195 | Supply only Horn assy set |
| 196 | Supply only Horn relay |
| 197 | Taking down and dismantling of Front suspension system of Tata Xenon and checking of front suspension and spring assy ,cleaning the spring ,steering system etc by proper oil and refitting after repair with proper greasing all as specified and directed (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 198 | Supply only Suspension pivot bush upper/lower |
| 199 | Supply only Front Suspension bush bone assy upper/lower |
| 200 | Supply only Front suspension spring assy |
| 201 | Supply only Suspension ball joint upper/lower |
| 202 | Supply only Suspension spring seal |
| 203 | Supply only Front shocker |
| 204 | Taking down and dismantling of rear suspension system of Tata Xenon and checking of rear suspension and spring assy ,cleaning the spring ,shocker etc by proper oil and refitting after repair with proper greasing all as specified and directed (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 205 | Supply only Rare spring bush |
| 206 | Supply only Centre bolt |
| 207 | Supply only 'U' bolt |
| 208 | Supply only Rear spring main leaf 1st |
| 209 | Supply only Rear spring leaf 2nd |
| 210 | Supply only Rear shocker |
| 211 | Supply and fix 12Volt,80/90 Ah battery with a robust and durable design for capable to withstand high temperature ,tolerate bumps and vibration, Make: Exide Express,Amron or equivalent |
| 212 | Supply and fix 12Volts,6/9Ah battery with a robust and durable design for capable to withstand high temperature ,tolerate bumps and vibration, Make: Exide Express,Amron or equivalent |
| 213 | Supply and fix cover outer 7.00 X 16, 14 PR with tube inner and flap complete all as specified and directed. |
| 214 | Supply and fix cover outer 7.50 X 16, 16 PR with tube inner and flap complete all as specified and directed. |
| 215 | Material & Labour for replacing the seat covers suitable for Vehicle Eicher with superior quality rexin with foam sheet for front and back seat complete with side door panels complete all as specified and directed by Engr-in-Charge. |
| 216 | Taking down fuel injection pump assy and dismantling FIP, injector and replacement of U/S parts of Eicher with calibration at admissible pressure and refixed at original position after repair all as per specified and directed (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 217 | Supply only FIP cam plate |
| 218 | Supply only FIP supporting plate |
| 219 | Supply only T-D piston |
| 220 | Supply only S.kit cross disk |
| 221 | Supply only vane pump |
| 222 | supply only Hy head assy |
| 223 | Supply only T-Roller, T-Pin(Set of Three) |
| 224 | Supply only nozzle element, Nozzle holder assy (Set of three) |
| 225 | Taking down and dismantling of Front suspension system /steering assy of Eicher and checking of front suspension and spring assy ,cleaning the spring ,steering system etc by proper oil and refitting after repair with proper greasing all as specified and directed.(Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 226 | Supply only Front spring bush |
| 227 | Supply only front spring main leaf 1st |
| 228 | Supply only front spring IInd leaf |
| 229 | Supply only Front spring IIIrd leaf |
| 230 | Supply only Tie rod end set |
| 231 | Taking down and dismantling of rear suspension system of Eicher and checking of rear suspension and spring assy ,cleaning the spring ,shocker etc by proper oil and refitting after repair with proper greasing all as specified and directed (Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 232 | Supply only Rear spring bush |
| 233 | Supply only Centre bolt |
| 234 | Supply only Rear spring main leaf |
| 235 | Supply only Rear spring II nd leaf |
| 236 | Supply only Rear spring III rd Leaf |
| 237 | Supply only Rear spring 'U' bolt |
| 238 | Supply only Rear shocker |
| 239 | Dismantling the propeller shaft assy from the TATA Xenon Mobile and checking the serviceability of following part ,replace the U/S part and refitting after repair as specified and directed.(Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 240 | Supply only Propeller shaft U/J cross |
| 241 | Supply only Propeller shaft yoke and teeth assy |
| 242 | Supply only Propeller shaft centre bearing |
| 243 | Supply only Propeller shaft cross holder |
| 244 | Supply only Propeller shaft nut and bolts |
| 245 | Dismantling the propeller shaft assy from the Eicher and checking the serviceability of following part ,replace the U/S part and refitting after repair as specified and directed.(Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 246 | Supply only Propeller shaft U/J cross |
| 247 | Supply only Propeller shaft yoke and teeth assy |
| 248 | Supply only Propeller shaft centre bearing |
| 249 | Supply only Propeller shaft cross holder |
| 250 | Supply only Propeller shaft nut and bolts |
| 251 | Material & Labour for replacing the foot mats front and back side including changing steering cover, foot mats, paddle cover etc of Tata Xenon (02 No) /Swift Dzire(02 No)/ Eeco(01 No)/ Ertiga (01 No) all as directed and specified |
| 252 | Material & Labour for replacing the foot mats front and back side including changing steering cover, foot mats, paddle cover etc of Eicher all as directed and specified. |
| 253 | Dismantling both left side door, right side door locks from the door checking the serviceability of locks and replacing the following U/S parts fitting and refix at existing place after repair for Eicher all as specified and directed.(Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 254 | Supply only Door lock assy |
| 255 | Supply only Door channel set |
| 256 | Supply only Door glass set (Door gola) |
| 257 | Supply only Door glass beading set |
| 258 | Supply only Door handle outer |
| 259 | Supply only Door lock remote assy |
| 260 | Supply only Door dust rubber set |
| 261 | Supply only Door glass handle |
| 262 | Taking out radiator assy from the vehicle Tata Xenon (02 No)/ Swift Dzire (02 No)/ Eeco (01 N0) and dismantling tops and bottom cover and cleaning of suitable chemical and refix at existing place after repair for Tata Xenon (02 No)/ Swift Dzire (02 No)/ Eeco (01 N0) all as specified and directed |
| 263 | Taking out radiator assy from the vehicle Tata LPT (01 No) and dismantling tops and bottom cover and cleaning of suitable chemical and refix at existing place after repair for Eicher all as specified and directed |
| 264 | Taking out self starter assy from the vehicle Tata Xenon (02 No) / Tata LPT (01 No) and replacement of U/S parts such as self armature assy, self drive pinion assy ,self carbon bush set, self field coil set and refix at existing place after repair for Tata Xenon (02 No) / Tata LPT (01 No) all as specified and directed |
| 265 | Taking out water pump assembly from the vehicle pump assembly of Tata Xenon / Eicher replacement of water and refix at existing place after repair for Tata Xenon / Eicher all as specified and directed |
| 266 | Taking out steering assy from the vehicle Eicher and dismantling and replace the UNSV part with new ones after repair assembling and testing and refix at existing place all as specified and directed(Note: Spare parts will be measured and paid for separately as supply only cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item) |
| 267 | Supply only steering sector shaft assy |
| 268 | Supply only steering sector shaft bush |
| 269 | Supply only steering ball bearing |
| 270 | Supply only steering oil seal |
| 271 | Supply & Fix in repair accelerator wire as per sample all as specified and directed by Engr-in-charge |
| 272 | Supply only in repair old unserviceable wind screen glass with new ones of vehicle of Eicher and refix at original place all as specified and directed |
| 273 | Supply only in repair old unserviceable wind screen glass with new ones of vehicle of Tata Xenon and refix at original place all as specified and directed |
| 274 | Supply only in repair old unserviceable side mirror glass with new ones of vehicle of Eicher and refix at original place all as specified and directed |
| 275 | Supply only in repair old unserviceable side mirror glass with new ones of vehicle of Tata Xenon and refix at original place all as specified and directed |
| 276 | Supply only in repair old unserviceable hose pipe with new ones of vehicle Tata Xenon / Eicher and refix at existing place all as specified and directed |
| 277 | Scraping & removing existing paint including making good surfaces by applying putty and rubbing to active smooth surfaces, and removing all dents from body , cleaning thoroughly and applying one coat of primer and rubbing to obtain smooth surface complete for vehicle Eicher all as specified and directed |
| 278 | Material & Labour for painting of whole vehicle with spray painting with DUCO paint of original colour with nos of coats to achieve its original shine /finish including refixing all existing logo/stickers etc complete for vehicle Eicher all as specified and directed |
| 279 | Scraping & removing existing paint including making good surfaces by applying putty and rubbing to active smooth surfaces, and removing all dents from body , cleaning thoroughly and applying one coat of primer and rubbing to obtain smooth surface complete for vehicle Tata Xenon all as specified and directed |
| 280 | Material & Labour for painting of whole vehicle with spray painting with DUCO paint of original colour with nos of coats to achieve its original shine /finish including refixing all existing logo/stickers etc complete for vehicle Tata Xenon all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender