Tender For Addition /Alteration To Sub Fire Station (Building No P-49) At installation Rajali Arakkonam.
Tender Value
23.96 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
20 days left
EMD
47920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranipet → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition /Alteration To Sub Fire Station (Building No P-49) At installation Rajali Arakkonam.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat or frames exc 1.5 Sqm but n. exc 4 Sqm each (w/o taking of shutters from the frame) complete all as specified and directed. |
| 2 | S & F of powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 3 | S&F Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening including stainless steel wire cloth .36mm nominal dia of wire and average width of aperture 1.4 and fixed with stainless steel wire staples, complete all as per requirement and direction of Engineer in-charge. |
| 4 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws and including all necessary fittings complete as per the directions of Engineer-in-charge. |
| 5 | M&L for 8 mm toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes with EPDM/GASKET AND SILICONE, screws, anchor, fasteners and installation required complete all as specified and directed |
| 6 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 7 | S & F Door closer hydraulically regulated (Aluminium extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 8 | S& F of 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed. |
| 9 | S & F of Aluminium anodised, barrel tower bolts 200mm of extruded section and fixed complete all as specified and directed. |
| 10 | M&L for 12mm Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed. |
| 11 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 12 | S & F 150mm Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 13 | S&F of Hasp and staple 150mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 14 | S & F Continuous (piano) hinges 40mm, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 15 | Taking/removing existing tar felt treatment of any description from RCC roof slab, terrace etc by means of MS scrapper patty or any other suitable tools and removing to a distance of 500Mtr from starting point and depositing complete all as specified and directed. |
| 16 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. |
| 17 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement plaster 1:3 as in paving complete all as specified and directed. |
| 18 | M& L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in roof padding complete all as specified and directed. |
| 19 | M&L for APP based polymeric membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified and directed. |
| 20 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying 2 coat of cement based wall care putty 1 mm each including complete removal of existing treatment complete all as specified and directed. |
| 21 | M&L for preparation of old surfaces applying two coat of white washing on ceiling surface complete all as specified and directed. |
| 22 | M&L for prepartion of newly plastered surfaces of walls/ceiling and applying two coats of oil bound distemper over a coat of primer after applying 2 coats of cement based wall putty 1 mm each to wall/ceiling surface complete all as specified and directed. |
| 23 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and directed. |
| 24 | Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed complete all as specified and directed. |
| 25 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. complete all as specified and directed. |
| 26 | M&L for PCC 1:3:6, type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement complete all as specified and directed. |
| 27 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed. |
| 28 | M&L for Rendering 15mm thick on fair & unfair faces of brick work or concrete surfaces in Cement plaster 1:4 complete all as specified and directed. |
| 29 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement plaster 1:6 complete all as specified and directed. |
| 30 | S & F Gl frame Size of grid 605 x 605mm work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm Each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm Each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 31 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 33 | M & L for 25 mm thick Cement concrete type B0, 1:2:4 (using 12.50 mm graded granite stone aggregate) in sub base of flooring/ hard standing /footpath complete all as specified and directed. |
| 34 | M&L for screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite complete all as specified and directed. |
| 35 | Material and labour 1st quality double charged/ultra charged Vitrified Ceramic tiles light/dark shade 10 mm thick (square/ rectangular) polished, area of Each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed. |
| 36 | Ditto all as per item No-35 here in before, but on vertical surfaces such as skirtings, dados and risers to steps etc complete all as specified and directed. |
| 37 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed. |
| 38 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 39 | M&L for mild steel deformed bars or TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 40 | M & L for RCC 1:2:4 type B-1 (using 20 mm graded stone agg ) as in Beams , cantilevers, bressummers, lintels etc complete all as specified and directed |
| 41 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed. |
| 42 | Making good under cills or over arches, lintels and bressummers.including all pinning when necessary complete all as specified and directed. |
| 43 | Providing and fixing internal window blinds (Roller,Vertical,Venetian/ Zebra type) including blind fabric/aluminium slats, head rail, bottom rail, operating chain/ cord/ wand, mounting brackets, screws, fasteners and installation complete all as specified and directed. |
| 44 | S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including welidng cleats, cuttiing, grinding, drilling, necessary cleats,connection plates,distance pieces etc., complete all as specified and directed. |
| 45 | M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed. |
| 46 | M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 47 | M &L for providing edge moulding to Granite stone of countersvanities etc. including machine polishing to edge to give high gloss finish etc. any description complete all as specified and directed. |
| 48 | M&L for coloured Glazed ceramic Designer elevation tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles on rendering 10mm thick in cement plaster 1:6 on concrete surface/block masonary/stone masonary or other surfaces. Tiles shall be conferming to IS - 15622, 2006, Gp-B II with average water absorption between 3% to 6% length, width and straitness of sides +10% (Max daviation). Thickness +5% (Max daviation). Centre & Edge curvature warpage +.5% (Max daviation). Breaking strength 1000N (Minimum) and minimum 95% tiles shall be free from visible defect complete all as specified and directed.Notes : Shade of the tile including colour, design and pattern shall be approved by Engineer in Charge. |
| 49 | Supplying and fixing complete tensile membrane sunshade over door/window, including MS/GI tubular steel structural framework, bracket, base plates, anchor/chemical fastener, PVC-coated polyster tensile membrane, SS/GI tension cables, turnbuckles, clamps, eye bolts and all other required accessories, including cutting, weilding drilling, grinding, surface preparation, primer and finish painting, membrane cutting, stitching, reinforcement, tensioning, transportation, loading/unloading, scaffolding, erection, installation and all labour, tools and tackles complete all as specified and directed. |
| 50 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures, PVC conduits and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. complete all as specified and as directed. |
| 51 | Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into existing concealed conduit through Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated hylem sheet fixed with camium plated iron screws for mountling switches, socket, fan regulators etc complete for for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified and as directed. |
| 52 | One light/fan point controlled by one switch with cable 1.5 Sqmm size complete all as specified and as directed. |
| 53 | All as per item ser No-51 above here in before but one 3 pin socket outlet 5 Amps, same board with cables 1.5 Sqmm size complete all as specified and as directed. |
| 54 | All as per item ser No-51 above here in before but one 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size complete all as specified and as directed. |
| 55 | All as per item ser No-51 above here in before but one 5 pin socket outlet 5/15 Amps, indipendent board with cables 2.5 Sqmm size complete all as specified and as directed. |
| 56 | Material and labour for point wiring of one light/ceiling fan/exhaust fan point controlled by one switch with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into PVC conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire for shed complete all as specified and as directed. |
| 57 | All as item No 52 above but for one 3/5 pin socket outlet 5 Amps, Independent board board with cables 1.5 Sqmm size drawn into PVC conduit for toilet complete all as specified and as directed. |
| 58 | All as item No 52 above but for one 5 pin socket outlet 5/15 Amps, independent board with cables 2.5 Sqmm size drawn into PVC conduit for toilet complete all as specified and as directed. |
| 59 | Supply and fixing Modular switch one way 5/6 A white Active one module all complete as specified and as directed. |
| 60 | Supply and fixing Modular socket 5 Amp, 2/3 pin Active white two module complete all as specified and as directed. |
| 61 | Supply and fixing Modular switch one way 16 A white Active one module complete all as specified and as directed. |
| 62 | Supply and fixing Modular socket 16 A, 5 pin multi purpose Active white two module complete all as specified and as directed |
| 63 | Supply and fixing in repair of Modular step type fan regulator, 120 W white Active two module complete all as specified and as directed. |
| 64 | S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed. |
| 65 | Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. complete all as specified and as directed. |
| 66 | Supply and fixing of GI metal flush box suitable for mounting moduler plate including removing old rusted metal box from site as per requirement of following modules:- |
| 67 | Cover plate with frame, 2 Module |
| 68 | GI metal flush box, 3 Module |
| 69 | GI metal flush box, 6 Module |
| 70 | GI metal flush box, 8 Module |
| 71 | GI metal flush box, 12 Module |
| 72 | GI metal flush box, 16 Module |
| 73 | Supply and fixing of combined both frame and cover plates fixing on mounting boxes for following modules:- |
| 74 | Cover plate with frame, 2 Module |
| 75 | Cover plate with frame, 3 Module |
| 76 | Cover plate with frame, 6 Module |
| 77 | Cover plate with frame, 8 Module |
| 78 | Cover plate with frame, 12 Module |
| 79 | Cover plate with frame, 16 Module |
| 80 | M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes complete all as specified and as directed. |
| 81 | Supply and fix in repair high efficiency wall mounted LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and taken as credit complete all as specified and as directed. |
| 82 | S& F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one SP MCB 20-32 Amps complete all as specified and as directed. |
| 83 | Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers including making hole in existing brick wall/dismantling brick wall for fixing exhaust fan/ fixing exhaust fan in exisitng glass window complete all as specified and as directed. |
| 84 | Supply and fixing in repair of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 85 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 86 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, warm white/ cool white with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 87 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC warm white colour, surface mounted with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 88 | Supply and fix wall mounted LED Decorative, wall mounting, stainless steel, rust free fixture with white glass diffuser suitable for 9W LED filament lamp E27 Base complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 89 | Supply and fix wall mounted LED Decorative, wall mounting, stainless steel, rust free fixture with white glass diffuser suitable for 9W LED filament lamp E27 Base complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender