Tender For Repairs To Backyard, Internal Fencing, Toe Walls, Hard Standing, Perimeter Drains, Plain Cement Concrete Saucer Drains Under Ge Gomantak Vasco
Tender Value
35 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
21 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Backyard, Internal Fencing, Toe Walls, Hard Standing, Perimeter Drains, Plain Cement Concrete Saucer Drains Under Ge Gomantak Vasco
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (RCC or steel) embedded in cement concrete, brick work, masonary etc. any section including taking out embedded portion and making good disturbed ground with earth as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 3 | Dismantling fencing wire mesh of any type complete all as specified and directed. |
| 4 | Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 Cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | Demolition of un reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | Demolition of Brick Work/ stone work / concrete block wall built in Cement Mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed. |
| 7 | Taking down cement or cement lime plaster on walls/ concrete/ roof slab any description including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 8 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 9 | Excavating in post holes(or similar holes) each n.exc 0.5 cum in hard/dense soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed. |
| 10 | Excavation in trenches in hard/dense soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and as directed. |
| 11 | Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25 cm thick in any type of soil/rock complete all as specified and directed. |
| 12 | Removing excavated material (Soils/Rock) to a distance exceeding 1.5 Km but not exceeding 5 Km and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing tiles and rubbish off the premises complete all as specified and directed. |
| 14 | M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed. |
| 15 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed. |
| 16 | M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 17 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface/block masonary in cement mortar 1:4 finished even & smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for applying three coats of white wash on walls including preparation of new surface complete all as specified and directed. |
| 19 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm etc on newly plastered surface of wall including preparation of surface complete all as specified. |
| 20 | M&L for applying two coats of cement base paint over a coat of alkali resistant primer on new surfaces of walls including preparation of surface complete all as specified and directed. |
| 21 | Cleaning of rust from the reinforcing bars of any size and dia to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry and applying two coats of epoxy base zinc primer in a span of 4 hrs over the treated bar and allow to dry for 6 hours complete all as directed. |
| 22 | Chipping of unsound/weak concrete material 35-45 mm average thickness from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type and cutting extra reinforcement wherever necessary including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. complete with necessary scaffolding/ staging and disposal of debris outside MD land for all lead and lifts complete all as directed. |
| 23 | M&L for mixing and applying polymer modified cement mortar (Sika monotop-122F or equivalent of Fosroc/ Dr. fixit/IWL/Ultratech) over Sikadur-32LP or equivalent of Fosroc/ Dr. fixit/IWL/Ultratech as bonding agent for 35-45 mm average thickness in two or three layers complete as per manufacturer instructions and all as directed at site.NOTE:- (i) Payment under this item shall be made only after proper wet curing has been done (ii) Work will be carried out by approved applicator of the firm. |
| 24 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 25 | M&L for mild steel TMT bars upto 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 26 | M&L for preparation of surface and applying one coat of primer under two coats of smartcare PU Aqua of Asian paint or equivalent in Sika, fosroc and applying one coat of exterior emulsion paint to match the existing surface complete all as specified and directed. |
| 27 | Cutting down the plants/ trees of girth n.exc. 15 cm from roof tops/ sides of external walls of building, chajja, wall junctions & at junctions of rain water/ waste water pipes including taking out the roots entered into wall/ slab surfaces, making good surfaces with PCC 1:2:4 type B-0 or cement mortar (1:2) including repairing the GI/ CI/ PVC pipe joints which were affected due to cutting/ taking out process after applying suitable herbicide including making good the disturbed surfaces to match the adjoining surfaces complete with necessary scaffolding/ staging/ Jhula etc, with all necessary safety precautions complete all as directed and as specified. |
| 28 | S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. as specified and directed (each line wire to be measured). |
| 29 | S&F in repair 600 mm dia galvanised iron (GI) concertina coil fabricated with 2.5 mm dia pre-galvanised (260 GSM as per IS 277) coil core and 0.5 mm thick blades galvanised as per IS 4826. The coil shall have a minimum tensile strength of 1300 N/mm2 Blade profile shall confirm to ASTM F 1379 BTO-22, with a blade length of 22 mm and 35 mm center to center distance between blades. Each coil shall have minimum of 56 loops and minimum 6-7 loops per meter of lenght, secured with a minimum of three GI clips per loop complete all as specified and directed. |
| 30 | M&L for mild steel work as in posts and struts in fencing or gates, flat iron fillets, angle iron, swan neck including cutting tops to shape, drilling holes, notching for wire etc. conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 31 | S&F mild steel screw bolts (machine made) dia of shank 11 to 15 mm with hexagonal or square head at one end and screwed the other end or screwed both end, each screw end to be fitted with 3 mm thick MS washers and one hexagonal nuts, length of bolt exc. 5 cm and not exc. 10 cm long complete all as specified and directed. |
| 32 | S&F PVC coated chain link fencing MS galvanised, min size 75 x 75 mm mess or cases with 3.5 mm dia mild steel galvanised wire lapped straightning and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 33 | Refixing in position MS galvanized chain link fencing of any size, any type of standard, rail, straining bolts etc., provision of binding wire after repair/ replacement of posts/ members, straightening of wire/ chain link fencing etc. complete all as specified and directed.Note:- Replacement of members/ bars, nut bolts shall be measured and paid separately. |
| 34 | Resecuring/ restaining including making good of staples of old barbed wire fencing with suitable wire or any other means complete all as specified and directed. |
| 35 | Refixing of concertina coil fencing with suitable wire or any other means incl taking down if required complete all as specified and directed. |
| 36 | M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 37 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in copings and the like including weathering, slightly rounded or chamfered angles and throating wherever required with and including necessary form work complete all as specified and directed. |
| 38 | M&L for Cement concrete concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 39 | Extra for forming fair finished drains or channels 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 40 | M&L for Hardcore of broken stone or boulder gauge n. exc. 63 mm deposited, spread & levelled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 41 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) 100 mm thick as in sub base finishing the surface even and rough to receive floor complete all as specified and directed. |
| 42 | M&L for 75mm thick cement concrete type C-1 1:3:6 (using 20 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction and necessary formwork complete all as specified and directed. |
| 43 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) 75 mm thick as in sub base or in levelling course, finishing the surface even and rough to receive floor complete all as specified and directed. |
| 44 | M&L for exterior grade light shade vitrified ceramic tiles 9-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed 20 mm thick in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. |
| 45 | M&L for exterior grade light shade vitrified ceramic tiles 9-10 mm thick (square/ rectangular) polished, to match floor tiles fixed on vertical surfaces such as dado, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10 mm thick in cement mortar 1:3 finished rough to fix tiles complete all as specified and directed. |
| 46 | M&L for 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 47 | M&L for reinforced precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:4 complete all as specified and directed. (Reinforcement shall be measured and paid for separately under respective item of schedule 'A'). |
| 48 | S&F in repair PVC (SWR) pipe 110 mm bore, single socketed with necessary fittings, in any length with rubber ring joints and jointed with approved adhesive and fixed to walls/ floor complete all as specified and directed. |
| 49 | Removing building materials by truck or tractor with using of if necessary JCB machine and trolly load min 5.00 Cum each load including loading, unloading and stacking at the destination and depositing out side defence land complete all as specified and directed. |
| 50 | S&F 4 mm dia plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised wire staples or steel pins, etc. complete all as directed (each line of wire to be measured) as specified and directed |
| 51 | M&L for preparation of old decorated plastered surfaces of walls including cornices, filling of cracks, holes, removing of vegetation growth, moss, algae and applying one coat of white wash complete all as specified and directed. |
| 52 | M&L for preparation of old decorated plastered surfaces of walls including cornices, filling of cracks, holes, removing of vegetation growth, moss, algae and applying one coat of colour wash on wall, chajja, facia, roof projections, cornices etc. complete all as specified and directed. |
| 53 | M&L for preparation of old decorated plastered surfaces of walls including cornices, filling of cracks, holes, removing of vegetation growth, moss, algae and applying one coat of cement base paint on wall, chajja, facia, roof projections, cornices etc. complete all as specified and directed. |
| 54 | M&L for preparation of old painted steel, surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 55 | M&L for preparation of old painted surface of wall and applying one coat of plastic emulsion paint complete all as specified and directed |
| 56 | M&L for preparation of old surface of wall/ceiling etc. brooming down or steel wire brushing, scrapping down with steel scrapper, smoke, soot, moulds, moss and efflorescent salts, oil and greasy spots etc. and making proper surface by applying ready mix exterior wall putty wherever required and applying one coat of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives complete all as specified and directed. |
| 57 | S&F mild steel work as in bands, straps, supports or stays for rainwater, Ventilating pipes, including bolts, if required; hooks ( stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three ways straps, plate washers and similar small articles conforming to Fe- 290.Gde-E-165 complete all as specified and directed. |
| 58 | S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290 Gde-E-165 complete all as specified and directed. |
| 59 | Providing and laying at or near ground level, factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 60 | M&L for renewing cement concrete tiles of any size and thickness thick in patches area not exc. 5 Sqm including removing and cleaning of old tiles as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface over & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 61 | M & L for preparation of new or previously untreated plastered surfaces or concrete surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat priming paint complete all as specified and directed. |
| 62 | M&L for preparation of old painted floor surfaces of any description over 10 cm width or girth by filling of cracks/holes with crack seal and applying one coat of floor paint with spray machine complete all as specified and directed. |
| 63 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and directed |
| 64 | M&L for preparation of old painted steel surface of any description not otherwise described n. exc 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 65 | M&L for cleaning of sewage line of any diameter and any description including in between manholes, manually or mechanically to clear the sludge/ blockage inside the sewage line and manholes by taking of mud/ sludge water/ night soil, salted soil and flushing with water to drain out sludge etc. to ease the flow of sewage including removing the sludge from site and re-fixing manhole covers properly complete all as specified and directed.NOTE:- (i) Line cleared and measured once will not be measured again within next two months. In case of blockage re-occure in the same line within two months contractor will clear the same without any extra cost to the Govt. |
| 66 | Cleaning and dewatering of septic tanks of any size or depth including cleaning outlet and inlet chambers, outlet/ inlet pipes, grills etc. of any description and removing mud/ solid sludge and finally washing with water for smooth functioning incl. removing sludge out side MOD land at places approved by Municipal authorities by Manual means complete all as directed. NOTE:- (i) Septic tank cleared and measured once will not be measured again within next six months. |
| 67 | Cleaning of manholes of any description and any size not exc. 1.50 M depth and taking out sludge, night soil, sludge water/ mud etc. manually/ mechanically and washing down with water for smooth functioning of sewage line and manhole and removing the waste to distance exc. 200 m and not exc. 250 m and buried underground including necessary earthwork and spreading of bleaching powder over waste complete all as specified and directed. |
| 68 | M&L cleaning and desludging of drains debris/sludge average width 50 cm and average depth 90 cm including removing out all debris/ sludge/ earth/ building material/ rubbish and leaves/ grass/ bushes from the drain including removing and refixing of covers complete all as specified and directed. |
| 69 | M&L for preparation of old painted plastered surfaces or concrete surface exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 70 | S&F in repair aluminium composite panel (ACP) of 3 mm thick identification/ signage board of any size, having matt black/dark colour factory finish with CNC/laser engraved numerals, letters and other identification details as per approved design, the engraved portion being filled/ finished in white weather resistant paint/ enamel or sticker to provide clear and permanent lettering. The board shall have neatly finished edges and corners and shall be fixed to wall/ structure with 4 Nos. stainless steel decorative fixing caps/stand off fasteners, including suitable screws, rawl plugs/ anchors, drilling, alignment and all necessary accessories complete in all respects as per approved drawing/sample and all as directed.Make :- Lennox/Reyonbond/Alpolic/Allex Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender