Tender For Petty B/R Repair Works Pertaining To Daily Maintenance Services Of 1/9 Gr And Inf Bn And Other Units At Dhana Mil Stn
Tender Value
10 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
20 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty B/R Repair Works Pertaining To Daily Maintenance Services Of 1/9 Gr And Inf Bn And Other Units At Dhana Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Supply & fixing in repair 0.56 mm dia Stainless steel wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads or in steel windows complete all as specified and directed. |
| 2 | Material & labour for repair to existing wire cloth such as tightening, nailing etc complete in the existing shutters all as specified and directed by Engineer-in-Charge. |
| 3 | Disconnecting existing tank setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc from following capacity complete all as specified and directed. (a) -do-' exc 250 Ltr and n.exc 500 Ltr. |
| 4 | (b) -do-' exc 500 Ltr and n.exc 1000 Ltr. |
| 5 | Material & labour for filling of joints for tiles/WC & WHB corner with white cement area n exc 2 sqm each all as specified and directed by EIC. |
| 6 | Repairs the leakage in the existing 15 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple upto 200 mm all as directed by EIC |
| 7 | Repairs the leakage in the existing 20 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple upto 200 mm all as directed by EIC |
| 8 | Repairs to leakage in floors of WC / Bathroom / Kitchen by breaking of existing floor and providing new PVC floor trap and grating and making good as per existing floor complete all as specified and directed. |
| 9 | Supply & fixing in repair 150 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as directed. |
| 10 | Supply & fixing in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed. |
| 11 | Supply & fixing in repair 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 12 | Supply & fixing in repair aluminium handles 150 mm size, cast type, anodised complete all as specified and directed. |
| 13 | Supply & fixing Door closer aluminium (extruded) hydraulically regulated designation No 2 universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 14 | Material & labour Double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed complete all as specified and directed. |
| 15 | Supply & fixing in repairs solid rubber beading (door seal) of 30 to 50 mm wide and 3 to 5 mm thick at bottom of existing doors all as directed by EIC |
| 16 | Fixing only in repairs existing sliding door bolt / tower bolt / handle / floor door stopper / helical door spring / hinges / hasp & staple, wooden pelmet boxes / drapery Rods of any size & material at any location complete all as specified and directed by Engineer-in-Charge. |
| 17 | Repairs existing aluminium door including frame with completely/partially opening of door shutter and tightening of all screws for proper opening and closing of door directed by Engineer-in-Charge. |
| 18 | Supply & fixing in repair Mortice lock of brass, vertical type size 100mm fixed with shutter with necessary cutting and fixing complete. |
| 19 | Easing of door shutters, window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed. |
| 20 | Supply & fixing for mild steel bow handle for fixing with window with suitable nut bolt/welded material.as specified and directed. |
| 21 | Supply & fixing for mild steel pag stay for fixing with window with suitable nut bolt/welded material.as specified and directed. |
| 22 | Supply and fixing in repair 100 mm MS butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed. |
| 23 | Supply and fixing in repair 75 mm MS butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed. |
| 24 | Supply and fixing 100 mm butt hinges, excruded aluminium alloy type B-21 with galvanised mild steel ISI markedhinge pin, anodised and fixed with wooden screws complete as specified and directed. |
| 25 | Fixing with welding only in repairs existing sliding door bolt / tower bolt / handle / helical door spring / hinges / of any size & material by welding M/C at any location complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply & fixing 600mm x 450 mm x 5.5 mm thick bevelled edge Looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and aluminium angle alround fixed to wooden plugs with chromium plated brass screws & washers complete including fixed in repairs complete all as specified and directed. |
| 27 | Supply & fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane as in repairs complete all as specified and directed. |
| 28 | Supply & fixing for figured glass, 3 mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as in repairs complete all as specified and directed. |
| 29 | Supply & fixing in repair vitreous china Half Stall type urinal (minimum), with grating and union for discharge pipe (including flush pipe , and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 and incl 60cm long brass screws pointing around urinal back in cement etc complete all as specified and directed. |
| 30 | Supply & fixing in repair kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed. |
| 31 | Supply & fixing in repair vitreous china wash basin white flat / Table top back size 550x400mm including PVC waste pipe , CP pillar tap Sawn neckCP waste coupling brackets , PVC conncetions 15mm dia 450mm long complete all as specified and directed. |
| 32 | Petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by providing/ changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed. |
| 33 | Petty repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection, PVC/GI bend incl replacing of rubber washer check nuts plunges or by M-seal etc for any type of flush complete all as specified and directed. |
| 34 | Supply & fixing in repair Bib taps, fancy type chromium plated with brass spendle crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket with weight min 400 grms complete all as specified and directed. |
| 35 | Supply & fixing in repair 15 mm bore PVC bib taps with min weight of 90 grms complete all as specified and directed. |
| 36 | Supply & fixing in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 37 | Supply & fixing in repair stop valve/angle valve/conceled 15 mm nominal bore, fancy type, chromium plated, with brass spendle screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 38 | Supply & fixing in repair two way angle valve/conceled 15 mm nominal bore, fancy type, chromium plated, with brass spendle screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 39 | Supply & fixing in repair Float ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and directed. |
| 40 | Supply & fixing in repair PVC connection 450 mm long suitable for 15 mm GI pipe with PTMT nuts & rubber washers complete all as specified and directed. |
| 41 | Supply & fixing in repair PVC Waste pipe flexible type suitable for couplings 32/40 mm & 50 mm dia 610 mm long for WHB/sink and fixed with rubber washers complete all as specified and directed. |
| 42 | Supply & fixing in repair PVC Waste pipe type suitable for Urinals 32/40/50 mm dia 610 mm long and fixed complete all as specified and directed. |
| 43 | Supply & fixing in repair CP Waste couplings 125 to 150 mm dia and weight not less than 250grms for kitchen sink fixed type suitable for waste down pipe fixed with rubber washers complete all as specified and directed. |
| 44 | Supply & fixing in repair CP Waste couplings 32/40 mm dia and weight not less than 150grms for WHB/kitchen sink fixed type suitable for waste down pipe fixed with rubber washers complete all as specified and directed. |
| 45 | Supply & fixing in repair casts copper alloy chromium plated shower rose fancy type, 100 mm dia fixed to 15 mm bore pipe all as specified and directed. |
| 46 | Supply & fixing in repair internal assembly for low level flushing cistern complete all as directed. |
| 47 | Supply & fixing in repair PVC handle for low level cistern complete all as directed. |
| 48 | Supply & fixing in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float complete all as specified and directed. |
| 49 | Supply & fixing in repair stainless steel grating 125/150 mm dia with/without hole for waste pipe and fixed to floortrap/nahani trap in CM 1:6 complete all as specified and directed. |
| 50 | Supply & fixing in repair plastic water closet sheet covers closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 51 | Supply & fixing in repair small fittings of 15 mm bore galvanized iron medium grade such as socket, elbow, nipple Tee, union reducer of different sizes etc for pipe. |
| 52 | Supply & fixing in repair small fittings of 20 mm bore galvanized iron medium grade such as socket, elbow, nipple Tee, union reducer of different sizes etc for pipe. |
| 53 | Taking up or down existing GI tubing for 15 mm dia pipes and connections, including cleaning for refixing or removal from site and making good the disturbed surface complete all as specified and directed. |
| 54 | -Ditto- but 20 mm dia pipe. |
| 55 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed. |
| 56 | -Ditto- all as per item No 55 above but 20 mm dia pipe. |
| 57 | Refixing 15mm old steel water tubing and conections in or old position fixed to walls, floors roof ceiling etc complete all as specified and directed. |
| 58 | -Ditto- All as per item No 57 above but 20 mm dia pipe. |
| 59 | Supply & fixing in repair for 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified. |
| 60 | Supply and Fixing of Stainless steel Drapery Rods (curtain rods) of 25 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length. |
| 61 | Supply and fixing 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed. |
| 62 | Supply & fixing in repair 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed. |
| 63 | Supply & fixing in repair 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed. |
| 64 | Supply & fixing in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 65 | Supply & fixing in repairs CP jet assembly 1.5 m long complete with accessories for EWC complete all as specified and directed. |
| 66 | Supply & fixing in repairs CP Jet Shower (health faucet) assembly 1.5 m long over knob of top portion complete with accessories for EWC complete all as specified and directed. |
| 67 | Supply & fixing in repairs CP Towel ring fixed with and including Chromium plated brass screws complete all as specified |
| 68 | Supply & fixing in repair of Tank Cover of different capacity 250/500/1000 ltr with connecting bolt and fixture complete all as specified |
| 69 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 12659.00/-] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender