Tender For special Repairs To Bldg No P-68 & P-72 (Cook House And Dining Hall) Of Sikh Regt At Dipatoli Under Ge Dipatoli
Tender Value
31.55 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
20 days left
EMD
63100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Bldg No P-68 & P-72 (Cook House And Dining Hall) Of Sikh Regt At Dipatoli Under Ge Dipatoli
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of RCC in floors (other than ground floors beams,chajjas,lending slab and similar suspended works and removing all demolished material from the site and deposit at low laying area up to distance 250 mtr as directed by the Engr-in-Charge. |
| 2 | Demolition of Brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles and M & L Brickwork with fly ash modular bricks, strainght or curved on plan exc 6M mean radious radius built in Cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for brick work using fly ash modular bricks, curved or straight on plan to any radius in half brick wall builit in CM(1:4) and inclDemolition of Brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engr-in-Charge. |
| 4 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded and pointed in any mortor omplete all as directed. |
| 5 | Material and Labour for 16mm to 18mm thick machine cut (table rubbed and polished) Granite of any type as in steps, jambs, pillars, cills, cooking platforms like in CM 1:4 including pointing with white cement mixed with admixture of pigment to match the shade of the slab complete including screed bed 15mm thick in CM 1:6 all as specified and as directed by Engr-in-Charge. |
| 6 | Rounding to edges of stone slabs on edge such as in steps cooking platform and other similar situations all as directed |
| 7 | M&L for machine cut kota stone slab flooring18-20 mm thick set over and including 15mm thick screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete all as specified and as directed by Engr-in-Charge. |
| 8 | All as per item No-7 here in before but here-in-before as in skirting over 10mm thick cement plaster in CM 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed by Engr-in-Charge. |
| 10 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as directed |
| 11 | M&L for Non- skid colour ceramic tiles,7 to 8mm thick square / rectangular area of each tile exc 0.11 sqm but n exc 0.18sqm in floor over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed. |
| 12 | M &L for double charged vitrified tiles, glossy finish light shade 7 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 13 | All as per item No 12 here in before but in skirting including 10mm thick rendering in CM(1:4) completed all as specified and directed |
| 14 | M&L for coloured glazed ceramic tiles in vertical surface 350mmx250mmx7mm/450x350x7mm thick over and including 10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed. |
| 15 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc and M&L for rendering on other than fair faces of brick work 12mm thick in CM 1:6 and to be finished smooth and even with out using extra cement for internal surface and M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls and including average 1mm thick white wall care putty to achieve even and smooth surfacecomplete all as specified and as directed by Engr-in-Charge. |
| 16 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc (a) M&L rendering on other than fair faces of brick work 15mm thick in CM 1:4 and to be finished smooth and even with out using extra cement for external surface (b) Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and as directed by Engr-in-Charge.. |
| 17 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc and M&L Rendering 5mm thick in cm 1:3 on ceilling. surfaces finished even and smooth without using extra cement and M&L for preparation of new surfaces and applying three coat of white wash on ceiling including cornices etc complete all as specified and as directed by Engr-in-Charge. |
| 18 | M&L for 1mm thick wall care putty on old plastered wall surfaces and rubbing smooth surface as directed by engr-in-charge. |
| 19 | M&L for 1mm thick wall care putty on old undolated ceiling surfaces and rubbing smooth surface as directed by engr-in-charge. |
| 20 | M&L for preparation old undeorated wall surfaces by washing ,rubbing down and stoping of distempered or complete removal of existig treatment of any height of bldigs and applying two coat of distemper oil emulsion white or tinted etc all as specified and directed |
| 21 | M&L for complete removal of existing treatment on wall of any height of bldigs by applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and as directed by Engr-in-Charge.. complete all as specified and as directed by Engr-in-Charge(Weather coat shall be of Asian paint, Apex ,ultima or equivalent as approved by GE) |
| 22 | M&L for preparation of old surfaces and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :-(a) Window frame of cross section 91.80mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) Sliding shutter frame of cross section 40x18x1mm.(d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for two shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j) aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid.) |
| 24 | S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 25 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sq. m each, complete all as specified and directed. |
| 26 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 & n exc 4 sq. m each, complete all as directed. |
| 27 | S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed by Engr-in-Charge. |
| 28 | S&F pressed steel frames for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 29 | M&L for PCC 1:2:4 type B1 20mm graded stone aggregate as in padding, hold fasts/filling of chowkhats or similar work complete all as specified and as directed by Engr-in-Charge. |
| 30 | M&L for glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats complete all as specified and directed. |
| 31 | S&F factory 35mm Flush shutters(ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and as directed by Engr-in-Charge. |
| 32 | S&F 18 mm thick celluka ply of Grade 1 quality with prelam econimic colour both side fixed with stainless steel screwes, solvent cement / adhesive to fabricate kitchen cabinet sides, top and bottom, door, shelf inside the cabinate and dwawer including, drawer channel, magnetic ball catch & other all fittings as required all as per manufacturer instruction including taking out old existing cabinet, complete all as specified and directed. (Make : M/s Rajshree or equivalant of approved make) |
| 33 | S&F Hasp & staple ,75mm, Aluminium anodised incl bolt to hinge plate and fixed with screws for cupboard. |
| 34 | S&F Continious (piano) hinges, mild steel, bright finish or elecrogalvenised, 30 mm width of flaps(when open) . |
| 35 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 36 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing complete all as specified and directed. |
| 37 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average with of aperture 1.18mm and fixed with tinned tack, or galvanised wire staples |
| 38 | S&F Aluminium anodised barrel tower bolt 200mm long. |
| 39 | S&F Aluminium anodised barrel tower bolt 150mm long. |
| 40 | S&F Aluminium alloy, anodised sliding door bolt of size 250mm with hasp and staple and fixing clips of sheet. |
| 41 | S&F Aluminium alloy,anodised handle cast type of size 150mm |
| 42 | S&F SS Butt hinges medium weight 100mm size,cold rolled mild steel. |
| 43 | S&F Ordinary rat tail rod pattern, 300mm spring incl roller and roller plate complete. |
| 44 | S&F steel tubing and connection in new or old position to walls,ceiling,floors etc complete all as specified and as directed 15 mm bore medium grade , with all fittings ,fitted to wall and ceiling or laid in floor and including for taking up or down steel tubing and connectionscomplete all as specified and as directed by Engr-in-Charge. |
| 45 | All as per item No 44 here in before but for 20mm dia complete and including for taking up or down steel tubing and connections all as specified and as directed by Engr-in-Charge |
| 46 | Fixing only GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors and incl taking down all as specified and directed |
| 47 | Fixing only GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors and incl taking down all as specified and directed |
| 48 | S&F in repair Gun-metal, globe or gate valves 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed. |
| 49 | S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed. |
| 50 | Dismantling water tanks and removing exc 250 & nexc 500 ltrs capecity complete all as directed and S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions (b) including 20mm dia of ball valved high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed with anti microbial property. |
| 51 | Dismantling water tanks and removing exc 1000ltrs & nexc2000 ltrs capecity complete all as directed and S&F 2000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions, including 20mm dia of ball valved high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed with anti microbial property. |
| 52 | S&F in repair 15mm dia bore, stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in pipe and all as specified and directed by Engineer-in-Charge. |
| 53 | S&F in repair 15mm, stop valve/angle valve, cast copper alloy fancy type chromium plasted with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design and all as specified and directed by Engr-in-Charge. |
| 54 | S&F in repairs bib taps fancy type, cast copper alloy chromium plated 15mm bore with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and all as specified and directed. |
| 55 | Supplied and fixed in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified. |
| 56 | Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed by Engr-in-Charge. |
| 57 | S&F as in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commerial ply wood or AC building board and fixed to wooden plugs with chromium plated brass screwes and cup washer complete (with fancy design) |
| 58 | S& Fix in repairs soap dish, any type fixed to plug with chromium plated brass screws |
| 59 | S&F Chromium plated tubular towel rail, 20mm dia, D type 60 cm long between flanges. |
| 60 | S&F in decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design and approved by Engineer-in-Charge. |
| 61 | S&F in repairs PVC valveless syphonic action fancy type low level flushing cistern 10 ltr. Capacity of approved incl flush pipe of 32mm bore and all as specified and directed. |
| 62 | Supply and fixing in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & including PVC P Trap, etc complete all as specified and directed. |
| 63 | Supplied and fixed in vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed. |
| 64 | Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation laying cable etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out. complete all as directed. |
| 65 | M&L for cement concret(1:4:8) Type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete |
| 66 | Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.all as directed |
| 67 | Returning filling in including spreading leveling watering and well ramming in layers n.exc.25 cm all as directed |
| 68 | Material and labour for pre-cast reinforced cement concrete 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in cover slab for manholes in any position and set in cement morter 1:4 including necessary form work complete all as specified and as directed |
| 69 | M&L for Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed. |
| 70 | M&L for mild steel TMT bars 6mm to 8mm dia cut to length, including cranking,bending etc and binding with mild steel wire(annealed) not less than 0.9mm dia |
| 71 | Demolition and breaking up 150/160mm dia drain pipes (salt glazed ware, AC or reinforced concrete or PE, DWC (Double wall corrugated pipes) set in cement mortar complete all as specified and directed |
| 72 | S & F ultra plus PE, DWC ( Double Wall corrugated ) pipes confirming IS-16098 Part - 2 : 2013 pertaining structured wall plastics pining system for Non - pressure drainage and sewerage 150 mm bore pipe and fittings with non smooth surface, type B complete all as specified and directed. |
| 73 | M&L Cement concrete bed to drain pipes including packing under ,hounching against the side of pipes after they are laid and tested in PCC (1:4:8) type D-2 for 100 to 150mm dia (RCC/PVC/DWP/SGR etc) pipe complete all as specified and directed |
| 74 | S&F PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp and Taking down eaves gutters and rain water pipes (any size or patterns) including all fittings,heads,shoes,bends,swan-necks etc complete all as specified and as directed by Engr-in-Charge. |
| 75 | S&F PVC(SWR) pipe 75 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp and Taking down eaves gutters and rain water pipes (any size or patterns) including all fittings,heads,shoes,bends,swan-necks etc complete all as specified and as directed by Engr-in-Charge. |
| 76 | S&F in repair PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed by Engr-in-Charge. |
| 77 | S&F PVC (SWR) bend of radius 110mm dia |
| 78 | S&F PVC(SWR) Tee of radius 110mm dia |
| 79 | S&F PVC (SWR) vent cowl 110mm dia |
| 80 | S&F PVC (SWR) bend of radius 75mm dia |
| 81 | S&F PVC (SWR) Tee of radius 75mm dia . |
| 82 | S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified. |
| 83 | Complete removal of all existing roof treatment from RCC roof including old hussion felt & preparation of surface with bire brush and cleaning with water complete and M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab.(b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab.(c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface.(d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction.(e) M&L for applying 2 coats aluminium paint over bituminous surface of membraneNote : WPC shall be measured and paid separately under relevant item. |
| 84 | Supply only liquid water proofing compound.ISI Marked |
| 85 | M&L for repair and rendering 10mm thick in CM 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed . |
| 86 | Demolition of cement concrete(un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and as directed by Engr-in-Charge. |
| 87 | M&L for cement concrete in ground or above ground floors 40mm thick over sub base 1:3:6) type B1 using 20mm graded stone aggregate finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 88 | M&L for parking tiles 400 x 400mm(SKD), Heavy duty10 to 12mm thick square / rectangular area of each tile in floor over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed. |
| 89 | M/L for 75 mm thick cement concrete1:3:6 type C2,using 40 mm stone aggregate finished even & smooth without using extra cement as in plinth protection etc. complete all as specified. |
| 90 | M&L for PCC 1:2:4 type B1 20mm grade aggregate as in padding, hold fasts/filling of chowkhats or similar work complete all as specified and as directed by Engr-in-Charge. |
| 91 | Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. |
| 92 | S &F for Rolled sections of Fe 410W (Gde 250 ) quality A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 93 | M&L for preparing the new surface of any description not otherwise described over 10 cm width or girth on steel surface and applying 02xcoats of synthetic enamel paint over one coat of red oxide primer all as specified & directed |
| 94 | M&L for preparing the old steel surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint all as specified and directed |
| 95 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified & directed |
| 96 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as directed. |
| 97 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size not less than 25mm ISI marked medium grade inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box and suitable size modular plate for fitting switch, socket etc complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 98 | (a) One light point controlled by one, one way switch 5 Amps |
| 99 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 100 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 101 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 102 | Description all as per item No 97 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 103 | S & F for modular Switch flush type single pole 5/6 amp, one way single module 230 Volts complete all as specified and directed at site. |
| 104 | S & F for modular Switch flush type single pole 15/16 amp, 230 Volts complete all as specified and directed at site. |
| 105 | S & F for modular socket outlet 2/3 pin, 5/6 Amp (2 module) 230 Volts complete all as specified and directed at site. |
| 106 | S & F for modular socket outlet 2/3 pin, 06/16 Amp (2 module) 230 Volts complete all as specified and directed at site. |
| 107 | S & F for modular fan regulator 2 module complete all as specified and directed at site. |
| 108 | S & F for Ceiling rose, surface Bakelite with 3 terminals PVC ISI marked for batten fitting complete all as specified |
| 109 | Supply and fix in replacement Polycarbonate Modular AC Box with 20 to 32Amps Single Pole MCB, enclosure and Heavy Duty ISI Plug Top (White) with indicator and connecting complete all as specified and directed. |
| 110 | S & F in replacement wall mounted Industrial grade LED tube light fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high tranmissitvity diffuser, luminous efficacy not less than 120 lumen/watt,THD <10% , Glare Free, natural white, power factor greater than 0.95, Color Temp 6500K(Cool white), CRI 80, In-built surge protection of 4 KVA, 230 volts complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 mm from ceiling rose to fitting complete all as specified and as directed. |
| 111 | S&F in replacement Industrial grade LED light fitting 1x9W/1X10W aluminium body bulkhead luminaires with built-In power LED driver, power factor >0.97, IP-65, Voltage Surge Protection Circuit up to 4 KVa, 100 lumens/watt including connecting up with three core flexible copper conductor cable of suitable size. |
| 112 | S & F in replacement for Industrial grade Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP66 & IK07 for security light fitting luminaire (120 lm/watt), with toughened glass, CRI>80, Power Factor >0.95 with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 113 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 230 CFM with Min service value 6.5 BEE. Five star rated with brushless direct current (BLDC) motor and Anti-dust coating complete all as specified and as directed including taking down old fan and deposit old unsv ceiling fan to MES store yard of AGE E/M Dipatoli |
| 114 | S & F for energy efficient exhaust fan Copper winding of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection & body earth connection with ceiling rose and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed including taking down old exhaust fan and deposit old unsv exhaust fan to MES store yard of AGE E/M Dipatoli |
| 115 | S & F in replacement MCCB DB VTPN 4 way 250A rated with metal double door, IP:43 protection, Isolated neutral bar, Insulated busbar assembly, Door earthing, Mechanical impact strength IK 09 suitable for upto 160A 4P MCCB as I/C (Frame 2) and suitable for MCBs as outgoing including grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed. |
| 116 | S & F in replacement for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with push/slide locking system including filling any blank slot with blanking plates & necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 117 | Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed. |
| 118 | S & F in replacement MCB TP 40 to 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 119 | S & F in replacement MCB SPN 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 120 | S & F in replacement MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 121 | M & L in replacement for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 122 | S&F Geyser 25 Litres with inner tank and heating element 2KW capacity, BEE 5 Star rated, PUF insulation, outer body made of rutst proof ABS and plastic end cover complete with all accessories such as safety valve, themostate, NRV, connection piece, anchor bolts etc incl record serial No, Make and marking MES No (As given by MES), complete all as per specified and as directed by Engineer-in-charge. (Note- Manufacturer shall provide warranty of inner tank for minimum 7 years and warrantee for heating element for minimum 3 years) including taking down & depositing old one to AGE E/M dipatoli store. |
| 123 | Supply & Laying in replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed. |
| 124 | Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement |
| 125 | Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed |
| 126 | S& F GI pipe light grade 50 mm dia of for cable connection with all fitting and fixed complete to walls andceilings or laid in floors/wall complete all as specified and directed by Engineer-in-Charge. |
| 127 | M&L for GI electrode chemical earthing, pipe in pipe technology of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit to achive earth resistance value less than or equal to 3 Ohm & EN voltage < 02 V,pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and primary conductor is inserted into secondray conductor having 80 MM dia. The primary conductor is inserted into secondory conductor and space between secondary and primary conductor of earthing electrode should becrystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel, and total depth should not less than 3.50 meters. Around the earth electrode earth pit borehole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC Contains mixture of Silica sulphate,Alumina, Iron Oxide, titanium Oxide, Calcium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 Cl chamber cover all as directed by Engineer-in-Charge.( Note : If less than 3 Ohm result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.) S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender