Tender For Repair To Road,Parapet, Road Furniture And Interlocking Paver Blocks At Af Stn Bhowali.
Tender Value
63 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
25 days left
EMD
1.19 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Road,Parapet, Road Furniture And Interlocking Paver Blocks At Af Stn Bhowali.
BOQ
| Sl. No. | Item Description |
| 1 | Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed. |
| 2 | All as per Item No 1 above but making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand), again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm complete all as specified and directed. |
| 3 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on black top surface complete all as specified and directed. |
| 4 | M&L for applying evenly a priming/ tack coat with bituminius primer @ 5.00 Kg per 10 Sqm complete all as specified and directed. |
| 5 | M&L for bituminous permix asphaltic semi dense concrete 30mm (consolidated average thickness) with 5.5% binder content by (paving bitumen VG-30) weight of total mix rolled and compacted with 8 to 10 tonne capacity power road roller to required camber and gradient complete all as specified and directed. |
| 6 | Demolition of Cement Concrete (unreinforced) in ground floors & pavings n exc 15 cm thickness (below or above ground level) and removal n exc 100 m complete all as specified & directed. |
| 7 | M & L for cement concrete type D-2 ,1:4:8 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete,sub base complete all as specified and directed. |
| 8 | M & L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 9 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry or laid dry & pointed |
| 10 | M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed. |
| 11 | M&L for chequered cement concrete tiles with grey cement and pigment of size 30cm X 30cm X 25mm thick, set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 12 | M&L for Endura (Parking Tiles) coloured tiles 7-8mm thick of size 300x300x7mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 13 | M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed. |
| 14 | M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered /stopped ends etc. complete all as specified and directed. |
| 15 | Demolition of brickwork/stone boulders, masonary built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone works & precast concrete surfaces complete all as specified and directed. |
| 16 | M&L Brickwork with subclass ‘B’ bricks,old size straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specifed and directed. |
| 17 | All as per item No 16 above but except brick complete all as specified and directed. |
| 18 | M&L for rendering 15mm thick in CM 1:4 on External faces (Exposed to weather) of brick or concrete surface of wall finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M&L for stone walling of random rubble stone masonary, uncoursed, well bounded, bedded & solidely hearted built in cement mortar (1:6) using locally available best stone complete all as specified and directed |
| 20 | All as per item No 19 above but except stone (stone shall be obtained from demolition all as directed by EIC) |
| 21 | Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm for lime or sand stone complete all as specified and directed. |
| 22 | M&L for flush pointing to RR or Polygon rubble stone masonery uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 23 | M &L Providing precast PCC bond stone (for stone walling), type B1 1:2:4 (20 mm graded stone aggregate) set in CM 1:6 complete all as specified and directed. |
| 24 | Providing precast cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones,mile stone, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham- fers, weatherings, throat- ing etc. and setting in mortar 1:4 complete all as specified and directed. |
| 25 | S&F in replacement of dual reflective cat eye of impact resistant plastic stud double moulded solid state having ultra violet resistant color(white/red/yellow) with four round disc containing 28 mini retro reflective glass beads of color white/red/yellow to side provided with steel zinc plated of dia 12mm and of length 120mm for fixing to road by hammering complete all as specified and directed. |
| 26 | S & F in replacement of dealineator made out double sided pure polster powder coated concealed top ellipsoidal design as per IRC with Total Height 1000mm and width 100mm (min) , Type-XI reflective 3 X 150x80mm strips including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 27 | M&L in replacement of Retro reflective Overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge complete all as specified and directed. |
| 28 | M&L for preparation of old/new road surface and applying thermoplastic reflective paint for marking of minimum 1.5 mm thick single coat as a centre line or edge line etc, road marking of 150/100 mm width using \\"HOT MARK\\" thermo plastic paint (Hot application) white /yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium caronate, inter filler etc, thermoplastic requirement for glass beads shall be conforming to BS-6086 of MOST specificaiton including spraying of glass beads etc complete all as per manufacture's instructions and as directed. |
| 29 | M&L for preparation of newly plastered surfaces applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge. |
| 30 | S&F in replacement of SGS circular convex type with high quality acrylic of polycarbonate ( scratch resistant and unbreakable) security mirror (1mtr dia), including earthwork, PCC in foundation, post of MS pipe 50mm dia, clamps, nuts & bolts etc. complete all as specified and directed. Note : SGS circular mirror shall be of 1st quality & ISI marked. |
| 31 | S&F in replacement of super delux quality solar stud of Aluminium body including solar- powered by monocrystal solar panel. One high capacity Ni-Cd rechargable battery Approximate 1000 mtrs LEDs- 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours back up- 12 hours of comtinous lightening at night complete all as specified & directed. |
| 32 | S&F spring post made out of PU material of dia 80mm and height 800mm provided with reflective sheet fixed with screws,epoxy or other adhesive material complete all as specified and directed. |
| 33 | Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge. Note :- Work shall be executed at LKT and Adm site as per directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender