Tender For Provision Of Perimeter Road Behind Kv School With Associated Works At Af Stn Memaura.
Tender Value
43.41 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
18 days left
EMD
86820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Perimeter Road Behind Kv School With Associated Works At Af Stn Memaura.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5m wide & not exc. 1.5 in depth for foundation, laying cable etc exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm in trenches, under floor complete all as specified & directed |
| 3 | Removing excavated material to a distance upto 1.5KM and depositing where directed at a level not exc 1.5m above the starting point complete all a specified & directed. |
| 4 | M&L PCC (1:4:8) type E-2 (using 40mm graded stone aggregate) in foundation fillings and mass concrete complete all as specified and directed. |
| 5 | M&L for Form work to fair finished surface of sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 6 | M&L for formwork to fair finished surface of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc, also splays between floors and beams, etc complete all as specified and directed. |
| 7 | M&L for form work to fair finished surfaces of sides of pillars, posts, struts, piers, coloumns and stanchions complete all as specified and directed. |
| 8 | M&L for RCC M-25 (desing mix) (20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams, plinth beams; bases for coloumns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 9 | M&L for RCC M-25 (desing mix) (20mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed |
| 10 | M&L for RCC M-25 (desing mix) (20mm graded stone aggregate) in beams, cantilevers, bressurmmers, lintels over 1.5m span complete all as specified and directed |
| 11 | M&L for mild deformed TMT steel bars 10mm dia and over, cut to lenght, bent to hsape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed |
| 12 | All as per item No 11 above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed |
| 13 | M&L Brick work with sub class 'B\\" bricks, straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:4 complete all as specified and directed |
| 14 | M&L Brick work with sub class 'B\\" bricks, straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:4 (except bricks) complete all as specified and directed. |
| 15 | M & L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed. |
| 16 | M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed. |
| 17 | M&L for applying two coats of cement base paint over a coat of primer on walls including preparation of newly plastered surface complete all as specified and directed. |
| 18 | M&L mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts confirming to Fe-290 Gde-E-165 complete all as specified and directed |
| 19 | M &L for Preparation of Surfaces of any new or previously untreated surfaces description, over 10cm in width or girth, not otherwise described and applying two coat synthetic enamel paint over one coat red oxide primer complete all as specified and directed |
| 20 | S&F galvanised two stand steel barbed wire 2.24 mm dia barbed wire 2 mm dia barbed at 75 mm spacing and straining and fixing to any type of standard rail, strafining bolts including securing and tying at crossing with and provision of galvanised wire, staples or steel pins etc complete all as specified and directed.(Each line of wire to be measured) |
| 21 | Dismantling wrought iron or mild steel work of any description. |
| 22 | Demolition of brickwork or precast concrete articles built in cement mortar complete all as specified and as directed. |
| 23 | M&L PCC type B-1,1:3:6 (20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed. |
| 24 | M&L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 25 | M&L PCC type B-1, 1:2:4 (20mm graded stone aggregate) as in coping, side kerbs, mud stops etc including neccesary formwork complete all as specified and directed. |
| 26 | Removing excavated material to a distance exc 1.5 KM and N.exc 5KM and depositing where directed at a level not exc 1.5m above the starting point complete all a specified & directed. |
| 27 | Rough excavation not exceeding 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed. |
| 28 | M&L Rolling and consolidating formation surfaces with vibratory power roller exc 8 tonne & n exc 12 tonne complete all as specified and directed. |
| 29 | M&L Soling 150 mm th (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed. |
| 30 | M&L 150 mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with Road roller 8 to 10 tonne complete all as specified and as directed. |
| 31 | M&L Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly tack coat with bituminous primer of grade VG 10 @ 10 Kg /10 Sqm paving bitumen by mechanical sprayer complete all as specified and as directed |
| 32 | Material and labour, premixed bituminous macadam using paving bitumen (VG-30 grade) @ 4% by weight of total mix using 12 to 25mm graded crushed stone aggregate,mixed in computerized hot mix plant laid, rolled and compacted with 8 to 10 tonne power roller to required gradient & camber, consolidated thickness 75mm or less, with the help of mechanical paver complete all as specified and directed. Note :-(i)The mix design shall be got done from approved lab and got approved from GE/AGE(I) before commencement of work.(ii) In the event of variation in the mix design in the percentage of binder content on minus side, the diffrence in quantity of binder content will be adjusted through supply only rate at market rate whichever is more paving bitumen VG - 30.(iii) However no adjustment shall be applicable if excess quantity of binder content is used / approved in the execution of work under this item. |
| 33 | Material and labour for preparation of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or with compressor air blower to remove all loose dirt etc and applying evenly tack coat with bituminous primer of grade VG 10 @ 5 Kg /10 Sqm by mechanical sprayer complete all as specified and as directed. |
| 34 | M&L for providing 30 mm thick (consolidated thickness) bitumen premix semi dense asphaltic concrete with 5.50% binder (paving bitumen VG-30) by weight of total mix, mixed in computerized hot mix plant, laid, rolled and compacted to required gradient and camber with the help of mechanical paver and rolled to uniform smooth surface with 8 to 12 tonne capacity power roller complete all as specified and directed.NOTE:- (i) The mix design shall be got done from approved lab and got approved from AGE (I) before commencement of work. (ii) In the event of variation in the mix design in the percentage of binder content on minus side the difference in quantity of binder content will be adjusted through supply only rate or procurement rate whichever is more for paving bitumen VG-30. (iii) No adjustment shall be applicable if excess quantity of binder content is used /approved in the execution of work under this item. |
| 35 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed |
| 36 | M&L for RCC M-25 (desing mix) (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 37 | M&L for form work to fair finished surface of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 38 | Continuous brick edging; with width equal to the length of the brick; laid dry on edge vertically with burnt clay old size bricks of sub class B all as specified and directed. |
| 39 | Removing excavated material n exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed. |
| 40 | Material and labour for providing sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.Note:- Punned thickness of 18 cm shall be measured |
| 41 | Supplying & laying burnt clay bricks, sub class 'B', old size laid in trenches over cable protection complete all as specified and directed. |
| 42 | M&L for 50mm bore GI tubing light grade with all fittings laid across road or across PCC drains, along electric pole or floor/wall for cable protection complete all as specified and directed. |
| 43 | Supply, laying and testing of LT cable 1100 volt grade XLPE insulated heavy duty underground electric cable PVC bedded and sheathed steel strip armoured aluminum stranded conductor of size 16 Sqmm 4 core complete all as specified and directed. |
| 44 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including connection with PVC insulated & PVC sheathed 3 Core 1.5 sqmm copper conductor cable from junction box complete all as specified and directed. |
| 45 | M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for coping around poles, including necessary form work finishing even and smooth without using extra cement complete all as specified and directed. |
| 46 | S&F steel tubular swaged poles complete with cast iron base plate final tapper plug, bolts, nuts and squed as specified type 410SP-31 (9 mtr long conforming to IS:2713 including painting of pole with two coats of aluminium paint over a coat red oxide primer after preparation of surface painting of 30 cm wide black and white strips upto 1.5 mtr from bottom of the errected pole including marking of pole number etc complete all as specified and directed.Note :- Earth work and PCC shall be measured separately |
| 47 | M&L painting of swaged pole bottom portion with two coat of Air Force blue (0.75M above foundation) over a coat of red oxide primer & 02 Nos alternate layer of red & yellow colour self adhesive reflectic tape of 100MM width & writing pole number on black background with white lettering after cleaning well the existing surface complete all as specified and directed. |
| 48 | S & F in replacement of Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 4 core and fixed adjacent to the Octagonal Poles by means of PCC foundation and suitable size MS angle iron brackets with nut and bolts and including provn for fixing 01 Nos of single pole MCB SP 6 Amp 'C' series inside the box complete all specified and directed.NOTE : MS angle iron brackets are to be painted with 2 coats of Airforce blue paint over a coat of red oxide metal primer. |
| 49 | S & F street light bracket fabricated from 40 mm dia light grade GI pipe 1.5 m long, bent to shape fixed on pole / building including 40x6mm flat iron MS clamps with nuts and bolts etc, duly painted with two coats of silver paint over a coat of red oxide primer including taking down old brackets from existing position complete all as specified and directed. |
| 50 | S & F PVC insulated & PVC sheathed 3 Core 1.5 sqmm copper conductor cable drawing inside the Pole/ bracket of street light complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender