Tender For Special Repair To Internal Road From Officers Mess To Mt, Vip Gate To Bn Magazine, Mandir To Memorial And Adm Block Of ,B, Inf Bn At Bikaner Mil Stn
Tender Value
35.96 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
19 days left
EMD
71920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Internal Road From Officers Mess To Mt, Vip Gate To Bn Magazine, Mandir To Memorial And Adm Block Of ,B, Inf Bn At Bikaner Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | M&L for applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 2.5 Kg per 10 Sqm, over bituminous surface complete all as specified and as directed. |
| 2 | M&L for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc including sweeping with brooms and finally fanning the cleaning surface free from dust and mud, sunken surfaces with gunny bags to remove all loose dirt existing road surfaces and making good complete all as specified and as directed. |
| 3 | M&L for applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 5 Kg per 10 Sqm, over bituminous surface complete all as specified and as directed. |
| 4 | M&L for providing, laying, spreading premix bituminous macadam (BM) with crushed and graded stone aggregate grading 02 mixed together with 4% of paving bitumen of grade VG-30 by weight of total mix including heating bitumen to the required temperature, mixing bituminous macadam in automatic and temperature controlled hot mixing with electronic operated 60-90 TPH hot mix plant, transporting the hot mix from HMP to work at site by tippers and laying, spreading uniformly by means of hydrostatic sensor paver finished (Paver shall not be compulsory in case of patch work using B.M.) and rolling and consolidating to the required gradient and camber (consolidated thickness 75 mm or less) with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and directed.Note : (i) The contractor shall quote the rate against item considering 4% VG-30 bitumen content. (ii) The bituminous macadam (BM) shall be covered with top layer/wearing course within in a maximum of 48 hours. If there is to be any delay by the contractor the course shall be covered by seal coat to the requirement of Clause 512 of MORTH (5th Rev) before opening to the traffic. The seal coat in such cases shall be considered incidental to the work and shall not be paid for separately. |
| 5 | M&L for Providing and laying 30mm thick (consolidated thickness) of Premix Bituminous Concrete (D.C.) with crushed aggregates of grading 2 as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing with electronic operated 60-90 TPH hot mix plant, transporting the hot mix from HMP to work at site by tippers and laying, spreading uniformly by means of hydrostatic sensor paver finisher and rolling and consolidating to the required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and directed.Notes : (i) Paving bitumen of Grade VG-10 for premix/tack coat and bitumen of Grade VG-30 for Bituminous Concrete shall be used and procured by the contractor under his own arrangement and at his own cost. (ii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying bituminous concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand, cement etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. (iii) Computerised print out of data of bituminous concrete in automatic and temperature controlled hot mixing plant shall be provided to the GE by contractor. Please Enable Macros to View BoQ information |
| 6 | M&L for Providing and laying 30mm thick (consolidated thickness) of Premix Bituminous Concrete (D.C.) with crushed aggregates of grading 2 as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing with electronic operated 60-90 TPH hot mix plant, transporting the hot mix from HMP to work at site by tippers and laying, spreading uniformly by means of hydrostatic sensor paver finisher and rolling and consolidating to the required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and directed.Notes : (i) Paving bitumen of Grade VG-10 for premix/tack coat and bitumen of Grade VG-30 for Bituminous Concrete shall be used and procured by the contractor under his own arrangement and at his own cost. (ii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying bituminous concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand, cement etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. (iii) Computerised print out of data of bituminous concrete in automatic and temperature controlled hot mixing plant shall be provided to the GE by contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender