Tender For Addition / Alteration And Certain Improvement Works At Married Accomodation Type -V (Mourya Block, P-19) At Cg Enclave Malkapuram Visakhapatnam Under Ge (I)(Cg) Vizag.
Tender Value
43.65 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
20 days left
EMD
87200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration And Certain Improvement Works At Married Accomodation Type -V (Mourya Block, P-19) At Cg Enclave Malkapuram Visakhapatnam Under Ge (I)(Cg) Vizag.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land complete all as specified and directed. |
| 2 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 3 | M & L for Vitrified,ultra charged, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 4 | M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:3 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 5 | M & L for 25 mm thick Plain Cement Concrete , 1:2:4 type B-1 (using 20 mm graded aggregate) as in sub base of floor finished even and amooth without extra cement complete all as specified and directed. |
| 6 | M&L 18 to 20 mm thick Granite stone slabs (Black/Ruby Red) work (table rubbed and polished) as in cooking platforms/ floors bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing types including screed bed 15 mm thick in cement mortar 1:6, complete all as specified and as directed. |
| 7 | M&L for 18 to 20 mm thick granite (jet black colour) tiles machine cut as in in skirting / dado jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing with and including backing coat of mortar 10 mm thick in Cement Mortar 1:3 complete all as specified and as directed. |
| 8 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform & other similar situations. Complete all as specified and directed. |
| 9 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. |
| 10 | M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. |
| 11 | M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and as directed. |
| 12 | M&L for Self Curing Ready Mix Plaster of thickness 10 mm , pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of walls, chajja, facia at any height with necessary scafolding surface finished even and smooth preparing for new plastering the wall surface with white cement based polymer modified including disposal of rubbish, complete all as specified and as directed. (Make: Ultratech Readyplast ACC surakha self cure plaster 200 or equivalent) |
| 13 | M&L for Self Curing Ready Mix Plaster of thickness 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on external surfaces of walls, chajja, facia at any height with necessary scaffolding mixed with integral water proofing compound as per manufacturer's instruction, surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, complete all as specified and as directed. (Make: Ultratech Readyplast ACC surakha self cure plaster 200 or equivalent) |
| 14 | M&L for Self Curing Ready Mix Plaster of thickness 5mm to 8 mm , pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of Ceiling, chajja, facia at any height with necessary scaffolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, complete all as specified and as directed. (Make: Ultratech Readyplast ACC surakha self cure plaster 200 or equivalent) |
| 15 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 16 | M&L for complete removal of existing paint from old decorated surface, preparation of wall surfaces by washing down, rubbing, and removing stains, including application of Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as ecommended by the manufacturer complete all as specified and as directed.(Notes: (i) After drying of primer coat, surface shall be sanded with zero-grade abrasive paper, ensuring primer is not rubbed off. Surface shall be dusted clean. Emulsion paint shall be applied in accordance with manufacturer's instruction.(ii) Rate to include scaffolding and all safety measures at site.) |
| 17 | M&L for preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as ecommended by the manufacturer complete all as specified and as directed.(Notes: (i) After drying of primer coat, surface shall be sanded with zero-grade abrasive paper, ensuring primer is not rubbed off. Surface shall be dusted clean. Emulsion paint shall be applied in accordance with manufacturer's instruction.(ii) Rate to include scaffolding and all safety measures at site.) |
| 18 | M&L for preparing new plastered surfaces of ceiling and applying two or more coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms / Lit of approved manufacturer of requirred shade and colour as per manufacturer's instruction complete all as specified and directed.(Notes: Rate to include scaffolding and all safety measures at site.) |
| 19 | M&L for preparation of old decorated surfaces by washing, rubbing down and stopping of distempered surfaces and applying one coat of 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms / Lit of approved manufacturer of requirred shade and colour as per manufacturer's instruction complete all as specified and directed.(Notes: Rate to include scaffolding and all safety measures at site.) |
| 20 | M&L for applying a layer of wall care putty not exceeding 2mm thick on walls/ ceilings to obtain a smooth surface including surface preparation and making good and undulations less on the surfaces complete all as specified and directed.(Note : Rate shall be included for necessary scaffolding and safety measures where required at site up to 4th storey). |
| 21 | M&L for complete removal of existing paint from old decorated wall surface, preparation of wall surfaces by washing down, rubbing, and removing stains, and applying two coats of plastic emulsion paint of any colour pattern over a coat of primer on a layer of cement/wall care putty complete all as specified and directed. |
| 22 | M&L for preparation of new plastered surfaces of walls and applying two coats of plastic emulsion paint of any colour pattern over a coat of primer on a layer of cement/wall care putty complete all as specified and directed. |
| 23 | Taking down chowkats or frames, area exc 1.50 but n.exc. 4.00 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 24 | Taking down chowkats or frames, area n.exc. 1.50 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 25 | Taking down PVC chowkats or frames of any description (without taking off shutter from the frame) complete all as specified and directed. |
| 26 | M & L factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 27 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 28 | S & F 35 mm thick, factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 29 | S&F 200 mm stainless steel , anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 30 | S&F 150 mm stainless steel , anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 31 | Providing and fixing approved quality stainless steel cylindrical knob door lock with key and turn mechanism, suitable for 35–45 mm thick wooden doors, complete with latch, strike plate, keys, screws and all necessary accessories, fixed in position as per the manufacturer's instruction complete all as specified and directed. |
| 32 | S&F 100mm long Stainless Steel butt hinges with necessary stainless steel screws complete all as specified and directed. |
| 33 | S&F 125mm long Stainless Steel butt hinges with necessary stainless steel screws complete all as specified and directed. |
| 34 | S&F Extruded Stainless Steel alloy handle, Cast type 100 mm size with necessary Stainless Steel screws complete all as specified and directed.. |
| 35 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 36 | S & F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed. |
| 37 | S & F floor door stopper of stainless steel body and tongue with hard drawn steel spring, fixed in floor of length 150 mm complete all as specified and directed. |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for wall complete all as directed. |
| 39 | S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings, framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed. |
| 40 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 41 | Providing and fixing factory made uPVC white colour sliding window Three track, area n.exc. 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass which shall be measured and paid in relevant item and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 42 | S&F UPVC ventilator with framework made out of multichamber hollow PVC section DWUF 405 (40x46mm) of sintex or equivalent section of other make as per make list. 3mm thick pin headed glass shall be fixed with frame in the lower section using extruded PVC section having a dimension of 9mm x 14.5mm (GL-19 PVC section of Sintex or equivalent section of other make as per make list ) with EPDM gasket (SPL-003 of sintex or equivalent section of other make as per make list) for both the PVC sections. Mullion of ventilator shall be made up of multichamber hollow PVC section DWUF 406 (63.5x40mm) of sintex or equivalent section of other make as per make list, shall be fixed with EPDM gasket. GL-19 or equivalent section shall be fixed to the three side of DWUF 405 or equivalent and one side of DWUF 406 or equivalent above the centre mulion. Glass panel of aluminium lower set to be fixed to the frame DWUF 405 or equivalent on the top of the ventilator to the glass. DWUF 405 or equivalent and DWUF 406 or equivalent corners shall be mitred cut, joineted and welded with 12mm square guard bar complete all as specified and directed. |
| 43 | S & F 4.8 mm thick, sheet glass, ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 44 | S & F 4.8 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 45 | S & F in repair table top basin with fixing accessories, vitreous china , size 700 x 435 x 135 mm excluding taps, waste, chain and plug and porcelain stopper but including supply and fixing of 32mm dia bore brass chromium plated waste coupling complete all as specified and directed. Make: Jaquar Cat Part No. ARS-WHT-39903 or Equivalent make as per list of Makes in PS. |
| 46 | S&F in repair vitreous China wash hand basin with pedestal, white, flat back, size 630 x 450 mm including brackets/rock bolt , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 47 | S&F in repair bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers. Complete all as specified and directed. |
| 48 | S & F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange complete all as specified and directed. Make: Jaquar Cat Part No. FLR-5273UPR or Equivalent make as per list of Makes in PS. |
| 49 | S&F in repair Overhead Shower 180mm dia Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified & directed.Make: Jaquar Cat Part No. OHS-1755 or Equivalent make as per list of Makes in PS. |
| 50 | S & F in repair CP Basin Mixture Single Lever Tall Boy with 150mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses complete all as specified & directed. Make: Jaquar Cat Part No. FUS-29005NB or Equivalent make as per list of Makes in PS. |
| 51 | S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete. |
| 52 | S & F in repair fancy type Bib taps with wall flange, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete complete all as specified and directed. Make: Jaquar Cat Part No. FUS-29037 or Equivalent make as per list of Makes in PS. |
| 53 | S&F in repair CP towel rack with lower hangar (Stainless steel) with hook complete all as specified & directed.(Make: Jaquar Cat Part No. AHS-1581H or Equivalent make as per list of Makes in PS.) |
| 54 | S & F in repair Single Towel Rail 600mm Long, Stainless Steel complete all as specified & directed. (Make: Jaquar Cat Part No. ACN 1111SM or Equivalent make as per list of Makes in PS.) |
| 55 | S & F in repair Toilet paper Roll Holder with Stainless Steel Flap complete all as specified & directed. (Make: Jaquar Cat Part No. ACN-1153S or Equivalent make as per list of Makes in PS.) |
| 56 | S & F in repair continental prime glass shelf 600mm long complete all as specified & directed. (Make: Jaquar Cat Part No. CPA-1171 or Equivalent make as per list of Makes in PS.) |
| 57 | S & F in repair fancy type Two way Bib taps with wall flange, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.Make: Jaquar Cat Part No. FUS-29041 or Equivalent make as per list of Makes in PS. |
| 58 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 59 | S&F in repair plastic seat cover white for EWC, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 60 | S & F in repair 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. |
| 61 | S&F in repair Rimless single piece WC with PP Sof close slim seat cover,Hinges,Dual flush Cistern fittings,fixing accessories and accessories set complete all as specified and directed. Make;Jaquar cat part no- CNS-WHT-853P180SPPSM or Equivalent make as per list of Makes in PS. |
| 62 | S & F in repair Health Faucet spray with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified & directed Make: Jaquar Cat Part No.ALD-565 or Equivalent make as per list of Makes in PS. |
| 63 | S&F in repair stainless steel kitchen plate rack, made out of 1.50 mm thick sheet for size 786X914X254 mm fixed on wall with screw, washers. upto 4th floor complete all as specified and directed. Make: Prayag Cat Part No.P-348 or Equivalent make as per list of Makes in PS. |
| 64 | S&F in repair 75 mm size PVC (SWR) floor trap, with grating of including jointing and fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 65 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 66 | M&L 32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 67 | S & F bottle trap 32mm size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified & directed. (Make: Jaquar Cat Part No. ALD-769L300x190 or Equivalent make as per list of Makes in PS.) |
| 68 | S&F in repairs 32mm dia. PVC waste pipe for WHB 60cm long with union complete all as specified and directed. |
| 69 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 70 | S & F in repair Continental soap dispensar Chrome with Glass bottle complete all as specified and directed .(Make: Jaquar Cat Part No. CAN CHR 1135N or Equivalent make as per list of Makes in PS.) |
| 71 | S&F in repair curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. |
| 72 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 73 | S&F in repair of CP fancy type angular stop cock 15mm dia with wall flange complete all as specified & directed.Make: Jaquar Cat Part No.FLR-5053N or Equivalent make as per list of Makes in PS. |
| 74 | M&L for 12mm thick veneered decorative plywood, grade1(with BWR resin) with decorative face veneers on both faces(coloured laminates front side and white laminates inside the cupboard) fixed with screws to timber frame work including taking down old unserviceable ply wood complete all as specified and directed. |
| 75 | M&L for stainless steel soft-closing concealed auto hinges (35 mm cup), 110° opening, suitable for 19 mm thick shutter, complete with screws and all accessories, including fixing to cupboards/modular kitchen shutters, complete all as specified and directed. |
| 76 | Supply & fix stainless steel (304 grade) plain basket of size 17\\"x20\\"x6\\" including telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed. |
| 77 | Supply & fix stainless steel (304 grade) cup & soucer of size 17\\"x20\\"x4\\" including telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed. |
| 78 | Supply & fix stainless steel (304 grade) Plate basket of size 17\\"x20\\"x8\\" including telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed. |
| 79 | S&F 75 mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed. |
| 80 | S&F100 mm hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 81 | S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 82 | Demolition of reinforced cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and in any position not otherwise described (reinforcement cut as required to facilitate demolition) complete all as specified and directed. . |
| 83 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 84 | S&F TMT bars 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 85 | M&L for RCC 1:1.5:3 type A1 (Nominal mix) using 20mm graded stone aggregates as in as in chajja and the like complete all as specified and directed. |
| 86 | Use & waste for flat formwork to sides and soffit of chajja and similar work, etc, rough finished surfaces of concrete etc all as specified and directed |
| 87 | Repairing sunken floor leakage as per following steps:-Surface preparation:(i) Prior to application of Dr fixit powercrite, ensure to clean the substract which shoud be free from all the dust ,foregn particles, loose aggregate and oil grease etc, This can be done with the help of scarifying, grinding water jetting and sand blasting etc.(ii) The surface should be wetted well prior to application throughly with water to get SSD condition.(iii) All the depression or pin holes/pot holes to be repaired using Dr Fixit powercrete method mortar in mixing ratio of (1 kg cement: 1.50 kg silica sand : 0.50kg of Dr Fixit powercrete)Coating application:(i) }}Mix Cement with Dr. Fixit Powercrete in ratio of 1 : 0.50 ( 1 kg cement OP C53 : 0.50 Dr. Fixit Powercrete ) by weight.(ii) The mix should be stirred thoroughly until smooth homogeneous paste is obtained(iii) Apply first coat over SSD /wet condition substrate(iv) Apply and unroll woven glass fibre cloth evenly on the wet coating before it dries out on larger areas(v) Using a nylon brush, apply one coat of Dr. Fixit Powercrete coating over the glass fabric so as to cover the fabric, allow 5-6 hours of air drying before application of another coat of Dr. Fixit Powercrete slurry coating over the surface.(vi) Provide polymer modified protective plaster of 15-20 mm thick over the coating to ensure safety frombmechanical damage.Curing:(i) Allow Dr. Fixit Powercrete coating to air cure for 3-6 hours after the final coat.(ii) Do not allow the rapid drying of the coating by covering the coating with help of polythene sheet in case of highhumidity and windy condition.(iii) However, a moist curing after the air drying is advisable.(iv) Following the moist curing, Dr. Fixit Powercrete coating shall be allowed to air cured for 3 days beforesubmerging it in water.Note: The above procedure is given for Dr Fixit Powercrete, any other equivalent make may please be used as per their manufacturer instruction subject to approve by Engr-in-Charge. |
| 88 | Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed. |
| 89 | S&F of 20 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed. |
| 90 | Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed. |
| 91 | S&F of 25 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed. |
| 92 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings heads, shoes, bends, sawn-necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories) Complete all as specified and directed. |
| 93 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed to walls including necessary brackets / clamps complete all as specified and directed. |
| 94 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed to walls including necessary brackets / clamps complete all as specified and directed. |
| 95 | S&F 110mm bore PVC (SWR) junction single (single \\"T\\") complete all as specified and directed. |
| 96 | S&F 75mm bore PVC (SWR) junction single (single \\"T\\") complete all as specified and directed. |
| 97 | M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 98 | M&L for providing and injecting chemical emulsion for post construction anti-termite treatment along the external perimeter of wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 99 | M&L for providing and injecting emulsion for post construction anti-termite treatment of soil undr existing floors using emulsion @one litre per hole 300mm apart inclduing drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cment : 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 100 | Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and directed. |
| 101 | M&L for hard core of broken stone or boulder, gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surfaces complete all as specified and directed. |
| 102 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 including necessary formwork complete all as specified and directed. |
| 103 | Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc all as directed. |
| 104 | Dismantling of old U/S main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall all as directed. |
| 105 | Taking down ceiling / exhaust fan from existing location and deposited to store complete all as specified and directed. Please Enable Macros to View BoQ information |
| 106 | Taking down ceiling / exhaust fan from existing location and deposited to store complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender