Tender For Road Safety Work Of Lumbini Duddhi Road (Sh-5).
Tender Value
8.65 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
8 days left
EMD
87000
Bank guarantee accepted
Document Fee
860
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonbhadra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work Of Lumbini Duddhi Road (Sh-5).
BOQ
| Sl. No. | Item Description |
| 1 | Construction of teble top as per ENC office circuler no 9452MT/60MT/ Samanya varg/2024 dated 29/07/2024 for 7.0 m wide SH ROAD |
| 2 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 3 | Supply and fixing of Pavement maker ( Cat Eye ) type X-ASTMD-4956-04.Every dimension 3 m ( USA make ) adherant plotting compound. The housing shall contain prismetic two glass covered prismetic reflective face to reflect incident light I/C all taxes. |
| 4 | Dirctiona and place Identification signs up to 0.90 sqm sige Board Providing and erecting direction and place identification retro-reflectorised as per -67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a cerficate of having the sheeting tested for coefficient of bretro reflicetion day time colour and luminance , shrinkage flexibility sheeting tested for vcoefficient of retro reflection , day time colour and fungus resistance , 3 years out door weathering and its having passed these tests shall be obtained from international/ government Laboratory /Institute by the manufacturar of the sheeting and in case the certificate is oblained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad, alternatively, a certificate conforming to as tm specifcation (D 4956-09) on artificial accelerated weathering requirments from a reputed laborratory in india can be accepted provisionnally in such 2 sifuation , the Employer /client ,if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeling the requlrement of three years outdoor weathering of the sheeling as per IRC 67:2012: Legends, letters, numerals and bord etc should be as per morth specification No-801.3.7 Sheet fixed over aluminium sheeting 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 mm x 75 mmx6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x45cm x60cm,60 cm belowground leave as per approved drawing . complete. |
| 5 | Supply & Fixing of Retro Reflective Tree Plate having size 15cm x 15cm cons/sting Typoe Xi Retro ReflectiveSheeting Fixed over 1.50 mm thick aluminum sheet including labour, Materal T&P etc for proper completion of the work The rate shall include all Materinals, lobour, T&P, transportation installation and incldentais all complete as per direction of the Engineer-in-Charge. |
| 6 | Supply and Installation of Delinator (road way indicators. Hazard markers, object marker) 1.2m long and 100 mm x 50mm, painted black colour and Red, white and Yellow strips of 60 cm continuous strip in two side reflcetorised panel at the top buried of pressed into the ground and conforming to IRC:79 and the drawing installation work shall be as per relevant clauses of MORTH specification section 800 and IRC 67 2010 Complete in all respect. For Both side reflectorized panel |
| 7 | \\"Solar Power road marker (Solar Studs)The solar studs shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTM D4280. Its colour may be white, red, yellow, green or blue or combination as directed by the Engineer Its water resistance shall meet the requirements of IP 65 in accordance with IS:12063:1987 category 2 for protection against water ingress. The dimensions of solar studs shall not be less than 100 mm X 100 mm X 10 mm. It shall have super bright LEDs so as to provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz. Its should be able to give the prescribed performance in the temperrature range of 40°C to +55°C. Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge.\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender