Tender For Road Safety Of Ghorawal Shivdwar Vardiya Jharkataha Road (Odr).
Tender Value
8.85 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
8 days left
EMD
89000
Bank guarantee accepted
Document Fee
860
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonbhadra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Of Ghorawal Shivdwar Vardiya Jharkataha Road (Odr).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with mechanical broom as per Technical Specification Clause 503. |
| 2 | Providing and laying dense graded bituminous macadam with 60-90 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 percent by weight of total mix and filler, fransporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. |
| 3 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 5 | \\"MORTH-801 Retro-reflectorised Traffic sign as per IRC-67-2012 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3. fixed over aluminium sheeting 15 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground bymeans of property designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and Its having passed these tests shall be obtained from International Govemment Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally 50X60 cm Single chevron In such a situation, the Employer / Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012. Legends, letters numerals and borders etc should be as per MoRTH specification No-801.3.7. Proof of the same in formof government report shall be uploaded while quoting tender.\\" |
| 6 | \\"MORTH-801 Retro-reflectorised Traffic sign as per IRC-67-2012 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3. fixed over aluminium sheeting 15 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground bymeans of property designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and Its having passed these tests shall be obtained from International Govemment Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. 30X90 Cm object Hazard In such a situation, the Employer / Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012. Legends, letters numerals and borders etc should be as per MoRTH specification No-801.3.7. Proof of the same in formof government report shall be uploaded while quoting tender.\\" |
| 7 | Supply & Fixing of Retro Reflective Tree Plate having size 15cm x 15cm cons/sting Typoe Xi Retro ReflectiveSheeting Fixed over 1.50 mm thick aluminum sheet including labour, Materal T&P etc for proper completion of the work The rate shall include all Materinals, lobour, T&P, transportation installation and incldentais all complete as per direction of the Engineer-in-Charge. |
| 8 | Supply and fixing of Pavement maker ( Cat Eye ) type X-ASTMD-4956-04.Every dimension 3 m ( USA make ) adherant plotting compound. The housing shall contain prismetic two glass covered prismetic reflective face to reflect incident light I/C all taxes. |
| 9 | Retro-refiectorised Traffic sign as per IRC-67-2012 providing and fixing of retro-refleectorised cautionary, mandatory and informatory sign as per IRC-2012 made of high intensity grade sheeting type -iv vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel iron post 75 mm x 75 mmx6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x45cm x60cm,60 cm belowground leave as per approved drawing . The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coeffcient of reflection day time colour and luminance shnnkage fiexibility, liner removal adhesion impact resistance, specular gloss and fungus resistance, 3 years out door weathering and its having passed these tests shall be obtained from international/ government Laboratory /Institute by the manufacturar of the sheeting and in case the certificate is oblained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad, alternatively, a certificate conforming to as tm specifcation (D 4956-09) on artificial accelerated weathering requirments from a reputed laborratory in india can be accepted provisionnally in such 2 sifuation , the Employer /client ,if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeling the requlrement of three years outdoor weathering of the sheeling as per IRC 67:2012: Legends, letters, numerals and bord etc should be as per morth specification No-801.3.7 proof of the same in from of govermment report shall be uploaded while quoting tender. (1) 60cm equilateral trengle with difrent plenth size (20cmx60cm). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender