Tender For Road Marking Work At Jagdishpur-Atheha-Ajhara Road (Sh 110) At T Junction In Distt. Pratapgarh
Tender Value
90 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
4 days left
EMD
6.50 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fatehpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Marking Work At Jagdishpur-Atheha-Ajhara Road (Sh 110) At T Junction In Distt. Pratapgarh
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. as per SI-503 (For BC) |
| 2 | Providing and laying dense graded bituminous macadam(100mm) with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Grade-1) |
| 3 | Providing and laying bituminous concrete (30 mm) with higher capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all |
| 4 | REPEATED BAR MARKING:- Providing and laying Repeated bar marking with hot appiled thermoplastic compound 15 mm thick including reflectorising glass beads @ 250 gms per sqm area, Thickness of 15 mm is exclusive of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and free from streak and holes as per IRC : 35-2015 |
| 5 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 6 | Cautionary Sign Board: Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. (T Junction Board and Accident Prone Area Board)60 cm equilateral triangle with diffinition plate (20x60 cm) |
| 7 | Cautionary Sign Board: Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. (T Junction Board and Accident Prone Area Board)90 cm high octagon |
| 8 | Cautionary Sign Board: Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. (T Junction Board and Accident Prone Area Board)50x60 cm single chevran |
| 9 | Cautionary Sign Board: Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. (T Junction Board and Accident Prone Area Board)30x90 cm (L/R) object harzard |
| 10 | Cat Eye: Supply and Fixing of Reflective Raised Pavement Marker with its Body surface made of tough ASA (Acrylic slyrence Acryloninite) or HIPS (Hi- Impact Polystyrence) or acrylonitnite butadiens styrencs (ABS). The Marker shall supported a load of 1335 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall perfecably be 35+ 50 to base and area of each retro reflecting surface shall not be less than 130 sqcm road sluds shall be legibly marked with name trade mark or other means of identification of the manufacturer. Dimensions of road stud should not be less than 100 mmx100mmx10 mm (RPM (with shank) as per ASTM |
| 11 | Tree Plate: Supply and Fixing refletive tree plate15cmx15 cm consisting type XI siting over 1.5 mm thick aluminium sheet. Proper completion of the work. |
| 12 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender